Verified
Write a Review
Our Products
Fruit Concentrates
2 Products availableEpoxy Coatings
2 Products availableSolar Panel
1 Products availableSolar Water Heater
1 Products availableSolar Water Heater Accessories
1 Products availableSolar Pump
1 Products availableSubmersible Pumps
1 Products availableLanterns
1 Products availableLeading Manufacturer, Supplier & Retailer of EX-CEL PVC Rigid Sheet, EX-CEL PVC Pro Sheet, EX-CEL PVC Free Foam Sheet, EX-CEL PVC Integral Sheet and EX-CEL PVC Glo Sheet.
Extruded from environmental friendly compound, our EX-CEL PVC Rigid Sheets have smooth glossy surface finish. We are a well known Manufacturer, Supplier and Exporter of PVC Rigid Sheets from Maharashtra. Our PVC Rigid Sheets are highly appreciated for their low flammability and good sound & thermal insulation. We hold the expertise of delivering bulk orders of the Rigid Sheets within the stipulated time.
Main Features :
Suitable For :
Applications :
Product Range
| Code | Colour | Thickness | Std. Width | Std. Length | ||
| mm | inch | mm | inch | |||
| J7011 | Grey | 2 to 12.7mm | 1000 | 39 | 2000 | 79 |
| J7010 | -- | -- | -- | -- | -- | -- |
| J7016 | White | -- | 1220 |
48 |
2440 | 96 |
| J7032 | -- | -- | 1500 | 59 | 3050 | 120 |
Technical Properties
| Properties | Test | Unit | Value |
|---|---|---|---|
| Physical | -- | -- | -- |
| Density | DIN53479 | g/cc | 1.40 to 1.46 |
| Hardness | DIN53505 | Shore D | 80 |
| Hardness Water Absorption | DIN53490 | % | 0.1 |
| Mechanical | -- | -- | -- |
| Tensile Strength | DIN53455 | MPa | ≥ 45 |
| Elongation at Break | DIN53455 | % | ≥ 60 |
| E Modulus | DIN 53457 | MPa | 2500 - 3000 |
| Charpy Impact Strength | DIN 53253 | KJ/M² | ≥ 7.5 |
| Izod Impact Strength | ASTM D256 | KJ/M² | No Break |
| Charpy Impact Strength | DIN 53253 | KJ/M² | > 7.5 |
| Flexural Strength | DIN 53452 | MPa | 80 |
| Drop Impact Strength (Height : 1.8 m & mass : 0.3 kg x thickness) |
IS 6307 | -- | Pass |
| Compressive Strength at 10% Deformation | DIN 53421 | MPa | 60 |
| Thermal | -- | -- | -- |
| Vicat (B/50) | DIN 53460 | ºC | 80 |
| Heat Deflection Temperature @ 1.8 MPa | DIN 53461 | ºC | 65 |
| Coefficient of linear Thermal Expansion | ASTM D 696 | ºC-1 | 7.07 x 10-5 |
| Electrical | -- | -- | -- |
| Surface Resistivity | ASTM D 257 | W | 2.8 X 10 16 |
| Volume Resistivity | ASTM D 257 | W-cm | 8.1 x 10 15 |
| Dielectric Constant at 1 MHZ | ASTM D 150 | - | 3.13 |
| Dielectric Strength | DIN IEC 243 | KV/mm | 16.8 |
| Dimensional Change at 120 ± 2ºC | BS 3757 | % | ≤ 15 |
| Flammability | -- | -- | -- |
| UK | BS 476 Part 7 | -- | Class 1 Y |
| USA | UL 94 | -- | V 0 |
Our company shares glorious credentials with the trusted Manufacturers, Suppliers and Exporters of EX-CEL PVC Pro Sheets from Maharashtra. Our PVC Pro Sheets are manufactured in compliance with set industrial norms. PVC Pro Sheets offered by us are lightweight and durable at the same time. Buyers are free to place bulk orders of the PVC Pro Sheets with u and expect their timely delivery.
Main Features :
Applications :
Product Range
| Code | Colour | Thickness | Std. Width | Std. Length | ||
| mm | inch | mm | inch | |||
| J1018 | Bright White | 3 to 10 mm | 1220 | 2440 | ||
Technical Specifications:
| Properties | Test | Unit | Value |
|---|---|---|---|
| Physical : | -- | -- | -- |
| Density | DIN53479 | g/cc | 0.55 - 0.70 |
| Hardness | DIN53505 | Shore D | ≥ 42 |
| Water Absorption | DIN53495 | % | ≤ 1.0 |
| Mechanical : | -- | -- | -- |
| Tensile Strength | DIN 53455 | MPa | ≥ 15 |
| Elongation at Break | DIN 53455 | % | ≥ 15 |
| Modulus of Elasticity | DIN 53457 | MPa | 900 - 1500 |
| Izod Impact Strength | ASTM D256 | KJ/M² | ≥ 9.0 |
| Electrical : | -- | -- | -- |
| Dielectric strength | DIN 53481 | KV/cm | ≥ 90 |
| Thermal : | -- | -- | -- |
| Vicat Softening Temperature | DIN 53460 | ºC | ≥ 73 |
| Coefficient of linear expansion | DIN 53752 | mm/mºC | 0.08Q |
| Thermal Conductivity | DIN 52616 | W/mK | 0.05 - 0.07 |
| Flammability | -- | -- | -- |
| UK | BS 476 Part 7 | -- | Class 1 Y |
| France | NFP 92-501 | -- | Class M1 |
| USA | UL 94 | -- | UL 94 |
We are an eminent Manufacturer, Supplier and Exporter of EX-CEL PVC Free Foam Sheets from Maharashtra. The PVC Free Foam Sheets we make available are rigid, lightweight and durable. Our Sheets are suitable for cutting, sawing, shearing, drilling, etc. We maintain a large stock of the PVC Free Foam Sheets in our state-of-the-art warehouse, to meet the bulk and urgent requirements of the buyers.
Main Features :
Suitable For :
Applications :
Product Range
| Colour Code | Colour | Thickness | Std. Width | Std. Length | ||
| mm | inch | mm | inch | |||
| J1018 | Bright White | 2 to 10 mm | 1000 | 39 | 2000 | 79 |
| 1220 | 48 | 2440 | 96 | |||
| 1560 | 61 | 3050 | 120 | |||
| 2050 | 80 | 3050 | 120 | |||
| 12 to 25 mm* | 1220 | 48 | 2440 | 96 | ||
| 3050 | 120 | |||||
| 4880 | 192 | |||||
| 5490 | 216 | |||||
| 6100 | 240 | |||||
Technical Properties
| Properties | Test | Unit | Value |
|---|---|---|---|
| Physical | -- | -- | -- |
| Density | DIN 53479 | g/cc | 0.55 - 0.70 |
| Hardness | DIN 53505 | Shore D | ≥ 42 |
| Water Absorption | DIN 53495 | % | ≤ 1.0 |
| Mechanical | -- | -- | -- |
| Tensile Strength* | DIN 53455 | MPa | ≥ 15 |
| Elongation at Break** | DIN 53455 | % | ≥ 15 |
| Modulus of Elasticity | DIN 53457 | MPa | 900 - 1500 |
| Izod Impact Strength* | ASTM D256 | KJ/M² | ≥ 9.0 |
| Charpy Impact Strength | DIN 53253 | KJ/M² | ≥ 15 |
| Flexural Strength | DIN 53452 | MPa | > 32 |
| Compressive Strength at 10% Deformation | DIN 53421 | MPa | > 6.5 |
| Electrical | -- | -- | -- |
| Surface Resistivity | ASTM D 257 | Ω | > 1 x 1014 |
| Volume Resistivity | ASTM D 257 | Ω-cm | > 1 x 1015 |
| Dielectric Constant at 1 MHZ | ASTM D 150 | - | 1.56 |
| Dielectric strength | DIN 53481 | KV/cm | ≥ 90 |
| Thermal | -- | -- | -- |
| Vicat Softening Temperature | DIN 53460 | ºC | ≥ 73 |
| Heat Deflection Temperature @ 1.8 MPa | DIN 53461 | ºC | 58 |
| Coefficient of Linear Expansion | DIN 53752 | mm/m ºC | 0.08 |
| Thermal Conductivity | DIN 52616 | W/m K | 0.05 - 0.07 |
| Flammability | -- | -- | -- |
| UK | BS 476 Part 7 | -- | Class 1 Y |
| France | NFP 92-501 | Class M1 | |
| USA | UL 94 | -- | V 0 |
Owing to our rich industry experience, we are counted among the trusted Manufacturers, Suppliers and Exporters of EX-CEL PVC Integral Sheets from Maharashtra. The PVC Integral Sheets we make available feature high impact strength and resistance to oscillations and vibrations. Buyers are free to place bulk orders of the PVC Integral Sheets with us and we ensure their timely execution.
Main Features :
Suitable For :
Applications :
Product Range
| Colour Code | Colour | Thickness | Std. Width | Std. Length | ||
| mm | inch | mm | inch | |||
| J1054 | White | 8 to 30 mm | 1250 | 49 | 2000 | 79 |
| 1220 | 48 | 2440 | 96 | |||
| 3050 | 120 | |||||
| 2440 | 96 | |||||
| 4880 | 192 | |||||
| 5490 | 216 | |||||
| 6100 | 240 | |||||
Technical Properties
| Properties | Test | Unit | Value | |||||
|---|---|---|---|---|---|---|---|---|
| Physical | -- | -- | -- | |||||
| Density | DIN53479 | g/cc | 0.50 to 0.60 | |||||
| Hardness | DIN5350-5 | Shore D | ≥ 55 | |||||
| Mechanical | -- | -- | -- | |||||
| Tensile Strength | DIN53455 | MPa | ≥ 11 | |||||
| Elongation at Break** | DIN53455 | % | ≥ 10 | |||||
| Charpy Impact Strength | DIN 53253 | KJ/M² | ≥ 15 | |||||
| Flexural Strength | DIN 53452 | MPa | > 30 | |||||
| Compressive Strength at 10% Deformation | DIN 53421 | MPa | > 3.0 | |||||
| Electrical | -- | -- | -- | |||||
| Surface Resistivity | ASTM D 257 | Ω | > 1 x 1014 | |||||
| Volume Resistivity | ASTM D 257 | Ω-cm | > 1 x 1015 | |||||
| Dielectric Constant at 1 MHZ | ASTM D 150 | - | 1.7 | |||||
| Thermal | -- | -- | -- | |||||
| Vicat Softening Temperature | DIN 53460 | ºC | ≥ 75 | |||||
| Heat Deflection Temperature @ 1.8 MPa | DIN 53461 | ºC | 60 | |||||
| Coefficient of Linear Expansion | DIN 53752 | mm/m ºC | 0.05 | |||||
| Thermal Conductivity | ASTM C 177 | W/m K | 0.1 | |||||
| Rate of Heat Transfer | DIN 52616 | W/m² K |
|
|||||
| Flammability | -- | -- | -- | |||||
| UK | BS 476 Part 7 | Class 1 Y | -- | |||||
| France | NFP 92-501 | -- | Class M1 | |||||
| USA | UL 94 | -- | V 0 |
Featuring smooth and glossy layer on both sides, our EX-CEL PVC Glo Sheets have homogenous closed cell structure. We are an eminent Manufacturer, Supplier and Exporter of PVC Glo Sheets from Maharashtra. Our PVC Glo Sheets are non-toxic, non-corrosive and lightweight. Buyers are free to place bulk orders of the Sheets with us and expect their timely delivery. The entire range of the Sheets is reasonably priced by us.
Main Features :
Suitable For :
Applications :
Product Range
| Code | Colour | Thickness | Std. Width | Std. Length | ||
| mm | inch | mm | inch | |||
| J1021 | White | 3 to 10 mm | 1220 | 48 |
2000 2440 3050 |
79 96 120 |
Technical Properties
| Properties | Test | Unit | Value |
|---|---|---|---|
| Physical | -- | -- | -- |
| Density | DIN53479 | g/cc | 0.60 |
| Hardness | DIN53505 | Shore D | ≥ 55 |
| Mechanical | -- | -- | -- |
| Tensile Strength | DIN53455 | MPa | ≥ 15 |
| Elongation at Break** | DIN53455 | % | ≥ 8 |
| Dart Impact Strength | ISO179 | J | ≥ 10 |
| Thermal | -- | -- | -- |
| Vicat Softening Temperature | DIN 53460 | ºC | ≥ 72 |
| Flammability | -- | -- | -- |
| UK | BS 476 Part 7 | -- | Class 1 Y |
| USA | UL 94 | -- | V 0 |
Mr. Aadesh Bhandari (Jain Irrigation Systems Limited)
Jain Plastic Park, N.H. - 6, P.O. Box No. 72, Bambhori, Jalgaon, Maharashtra - 425001
Share us via
View Contact Number 
