Jaideep Engineers

Gobind Nagar, Ambala, Haryana

bani: a 209       

this rotary microtome equipped with imported roller guide rails and high-precision roller screws. this is an ideal device for use in histology due to its ergonomic design, compact structure, high precision, and stable and reliable performance.

features:

·        ideal sectioning for using disposable blade

·        large-volume removable waste tray on the top of housing, convenient to use;

·        imported cross-roller guide rails

and high-precision screw motion mechanism

·        advanced high-precision micro-drive feed system enable seven and high-precision sectioning;

·        small coarse-advance hand-wheel an ergonomic design.

Standard double wall construction inner (450mmx300mmx200mm) being of stainless steel and outer of M.S powder coated finished the gap filled with glass wool insulation. The top cover 75mm 6 nos. holes concentric rings. Temp range 5 degree C above 100degree C is controlled by thermostat or digital PID controller. Heating is attained by immersion type 2Kw element with accuracy of + - 1 degree C. supplied with plug & cord with pilot lamp, thermostat control knob etc.

Immaculate design, hi-tech features, efficient performance and promising life- our Hot Air Ovens are totally worth it. We are bracketed among the A-listed Manufacturers and Suppliers of the Hot Air Oven from Haryana, India. By keeping in mind the divergent needs of laboratory applications, we dole out the Hot Air Ovens in wide range of specifications. Lastly, we keep the price quotes to the minimal.

More About Hot Air Oven :

• The standard double wall fabricated, inner chamber made of anodized aluminum or highly polished stainless steel sheet.
• Exterior fabricated out of thick powder coated mild steel.
• The gap between the walls is filled with special grade glass wool for insulation.
• Inner chamber is ribbed for placing shelves at convenient levels.
• The two or three shelves are provided with the elegant door.
• The Nichrome wire heating element is provided on three sides attain quick and uniform heating range 50 to 250 C controlled by capillary type thermostat.
• L- Shaped thermometer is built in type.
• Control panel provided with selector switches for high or low rating of power thermostat control knob and indicators for main & thermostat and supplied with cord and plug.
• The equipment is suitable to operate 220V Ac 50Hz single phase.

Highlights :

• Low operational cost
• Efficient performance
• Longer service life
• Non-corrosive housing

Capitalizing on our state-of-the-art facility, vast experience and rich resources, we endeavor to proffer the Fume Hood Chambers that are impeccable in every aspect, be it designing, functionality or reliability. Our name figures amid the illustrious Manufacturers and Suppliers of the Fume Hood Chamber from Haryana, India. All needs of our clients are gratified by making available these Chambers in the choicest specifications at the unbeatable prices.

More About Fume Hood Chamber :

• Fume Hood Chamber is designed to contain and exhaust toxic, obnoxious or otherwise harmful gases, vapors, mist etc. to protect personnel and equipment.
• The motor driven blower of Fume Hood Chamber creates negative pressure within the chamber extracting the contaminated air from work area and expels it to the atmosphere.
• The hood is ventilated of the air drawn from inside the laboratory which is used effectively for through sweep out of the work chamber.
• Fume hood made of stainless steel or mild steel.
• The outer (size 3’ x 3’ x 6’ feet) is made out of S.S 304 grade, mild steel powder coated and wooden mica pasted finished and 316 grade inside acid resistant.
• The work surface is fitted with small wash basin with good quality tap.
• A gas cock is also fitted for gas supply. A sliding slash made of glass moves vertically up and down with concealed counter balanced weight.
• Chamber is fitted with 20W fluorescent light.
• Space underneath the work station is provided with storage compartment.
• 15/5 Amp socket with switches is provided for light and exhaust system.
• Fume Hood Chamber is supplied with cord and plug to work on 220/440volts 1/3 phase 50Hz A.C. Complete with exhaust system PVC 4” x 10’ft round fume duct.
• The duct for exceeding above 10’ft length high CFC exhaust system provided optional.

Features :

• Inbuilt centrifugal blower unit
• Fluorescent tubes with safety electrical
• Initially located electric plugs.
• Gas and air connections.
• Counter balanced sliding up & down front sash (door)

We have engineered worlds finest B.O.D. Incubator, which is designed specifically for low temperature incubation. The Laboratory BOD Incubator offered by our company is composed of triple walled chamber along with thick layer of glass wool for prevention of heat loss. We have also provided cooling unit at the lowest portion of working chamber for low temperature work. The heat arrangement in this type of B.O.D Incubator is done at inner chamber for high temperature work. With our excellent quality we have marked our place among the top ranking Biological Oxygen Demand Incubator Manufacturers.

Features :

• M.S powder coated outer look.
• Stainless steel chamber with acrylic door allowing.
• Inspection of material in the chamber.
• Easily operated by a fine looking digital control panel.
• Working for higher and lower temperature.
• Digital timer 0-24 hours day and night cycle provided.
• The temperature is controlled by a digital thermostat.
• The sealed and branded compressor with protective devices is provided.
• The size of B.O.D inner chamber is (110, 170, 280 and 425) best use other size can be provided on order.
• The B.O.D in aluminum chamber can be provided.