Jai Industries

Odhav, Ahmedabad, Gujarat

• Advanced saw carriagewith high feed rate driven by rack / pinion that ensures high cutting accuracy.
• Theroust gripersensure perfect panel clamping without damaging the material surface.
• Thealignersliding on guides ensures precision on cross-way cuts.
• A uniform holdingpneumatic clamping beamensuring synchronized cylinder actuation at both ends.
• Automatic device for theoptimisation of the blade projectionin relation to any material thickness.
• Equipped withinfeed air floating tables.

• Machine is light in weight, so it can be used for large size boards where the job is fixed onto a table & machine can be used on it.

Heavy duty precision Sliding Table

Runs on large rollers sandwiched between hard chromed guide bars. Hollow multi-chamber alu. extrusion guarantees optimal torsion resistance & rigidity

• Heavy duty machine suitable for diffrent application like moulding, routing, arch moulding, rebating, grooving, tenoning.
• Ground and electronically balanced spindle for vibration free operation.
• Two diffrent spindle speeds for selection depending on tool diameter and application.

The hard anodized 1300mm alluminum extrusion sliding table is precision machined and features a 360mm wide table.

A heavy duty mitre fence with wood clamping for tenoning work and an alluminum extruded adjustable side reference fence.

Auto Feeder : (Optional) For auto feeding of workpiece & can be bought any time separately

• Widely used for sanding multi-plywood, MDF, Particle board, Solid wood panel, door, window, wood plastic composite material, etc.
• RP model: Single head sander is designed for fine surface polishing.
• R-RP model: Double head sander is designed for thickness calibration, surface sanding and fine surface polishing.
• Polishing pad can be adjusted up-down to change the pressure acording to different workpiece.
• Electronic pneumatic abrasive belt tention and conveyor belt tention system.

While process of rebating, both circular saws cutting thoroughly on workpiece, results we got reusable strip from rebate.

• Model No.
• J-1510 (A)

01 no. ele. motor of 3HP/1440 RPM, 01 no. ele. motor 2HP/1440 RPM, 01 no. ele motor 3HP/2800 RPM, 01 no. Gear box with 0.5HP ele. motor, Electrical panel, Motor pulley - 03 nos., motor plate, V-belts, Extension table with support-02 nos., toolkit & m/c. manual.

Heavy duty machine with 45 tilting arbour for angular cutting. Precise sliding table for smooth opration.

• Model No.
• J-634 (ST)
• Standard Accessories :-

  mitre gauge, motor pulley, motor fixing plate, saw guard, mitre gauge with Wood clamping facility, toolkit & m/c manual.

High quality conveyor belt for long service life. Variable feed speed for precision work of diffrent sanding application.

• Model No.
• J-1812, J-1824, J-1842

3 Phase / 1440 rpm 3 hp & 0.5 hp ele. motor (for Model no J-1812), 5 hp & 0.5 hp ele. motor (for Model no J-1824), 7.5 hp & 1 hp ele. motor (for Model no J-1842), control panel, sanding belt, toolkit & m/c manual

Note:Use Dust Collector for superior performance

Sturdy & proven machine from the Jai range with a very wide option of sizes

Jai offers a very wide range of m/cs and models of finest Surface Planer that work on wood as swift as a knife on butter M/c like Master models of heavy duty for proven performance.

• Model No.
• J-127, J-127 L, J-127 LL, J-128, J-128 LL

Master series Thicknessers are the highest selling m/cs for its rugged heavy duty structure, master workability and long life durability. Auto Mould models are good for additional facility of moulding making.

• Model No.
• J-502, J-503

Single and Double Auto Mould models are available. Work table can be tilted for angular moulding and V-notch table helps for moulding on square work piece.

• Model No.
• J-505, J-507

Moulding block 2 no. each of 1.5" & 3" length (for J-507), Moulding block 1 no. each of 1.5 & 3" (for J-505), motor pulley, motor fixing plate, washers set. moulding V-block & toolkit

Precise heavy duty wide sliding table for smooth operation. 45 tilting arbour for angular cutting. Ripfence with fine setting for precise positioning for cutting. Specially machine of plywood industries precise cutting 8'x 4' boards.

• Model No.
• J-1634

01 No-5HP / 1440 RPM electric motor, motor pulley, motor fixing plate, starter, V-belt, sliding table & extension table with support, mitre guage, saw guard, mitre gauge with Wood clamping facility, toolkit & m/c manual.

Heavy duty machine with 45 tilting arbour for regular cutting.

• Model No.
• J-634
• Standard Accessories :-

  mitre gauge, motor pulley, motor fixing plate, saw guard, toolkit & m/c manual.

The rubber drum can be fitted on both ends to fully utilize the entire spindle.

• Model No.
• J-802

1 no. ele motor 1 HP/1440 RPM, 05 nos different sizes of rubber rolls, table inserts, electrical switch, toolkit & m/c manual.

Sanding platen can be adjusted horizontally or vertically for surface sanding.

• Model No.
• J-800

1 no. ele motor 1.5 HP/2800 RPM (3-phase), sanding belt, mitre gauge, end table, starter, toolkit & m/c manual.

Bench type belt sander to be used vertically, horizontally or any where in between. 10" disc for fast stock removal.

• Model No.
• J-710

Sanding belt, sanding disc, motor pulley.

Extra Accessories:-Stand for motor fixing.

Heavy duty machine with specific chisel tool makes chisel mortising so easy for single component square slots. Pneumatic head lowering for greater safety, precision and easy operation.

• Model No.
• J-1920

01 no. electric motor of 1 HP-2800 RPM-3 phase, R/F Switch, " chisel set, drill chuck, toolkit & m/c manual.

Note:Must use better quality Chisel for good performance of Machine.

Heavy duty machine with specific chain tool makes chain mortising so easy for single component of rectangle slots.

• Model No.
• J-930(H)

1 no. electric motor of 3 HP/1440 RPM-3 phase, " chain set, R/F switch, oil bowl, grinding wheel & V-belt fitted in grinding attachment, toolkit & m/c manual.

Note:M/c with motor of 1.5 HP 1-phase at extra cost.

Heavy duty machine with specific chain tool makes chain mortising so easy for single component of rectangle slots.

• Model No.
• J-930

1 no. electric motor of 3 HP/1440 RPM-3 phase, " chain set, R/F switch, oil bowl, grinding wheel & V-belt fitted in grinding attachment, toolkit & m/c manual.

Note:M/c with motor of 1.5 HP 1-phase at extra cost.

Heavy duty wood clamping facility for accurate tenoning with easy table movement.

• Model No.
• J-919

2 no. electric motor of 2HP / 2800 RPM ( 3-phase), 2 nos. carbide cutter blocks, mitre gauge, mitre guage with wood clamping facility, toolkit & m/c manual.

Tenoning width & depth is adjustable within specified limits, The tenoning axis can be horizontal, vertical or 45 by changing the data in PLC unit.

• Model No.
• J-1941

Grinding process by handwheel is so smooth dua to gear type design.

• Model No.
• J-234, J-235, J-236

Grinding wheel safety guard, motor pulley, motor plate

Extra Accessories :Grinding wheel

Grinding process by handwheel is so smooth dua to gear type design.

• Model No.
• J-234 C, J-235 C, J-236 C

Grinding wheel safety guard, motor pulley, motor plate

Extra Accessories :Grinding wheel

Grinding process is saw basic and easy by moving top slide.

• Model No.
• J-124, J-125

Grinding wheel safety guard, motor pulley.

Extra Accessories :Grinding wheel

Widely used for low air suction capacity with single bag construction.

Statically balanced high speed impellers give vibration free efficient suction.

• Model No.
• DC-21.in, DC-31.in

Widely used for medium & high air suction capacity with double bag construction.

Statically balanced high speed impellers give vibration free efficient suction.

• Model No.
• DC-32.in, DC-52.in, DC-72.in

For auto feeding of workpiece with safety improves production, reduce cost and better finishing with accuracy.

Setting the available speed is a combination of motor speed (Pole change by switch, R/F) & gear setting. Speed is very important to achieve efficiency & quality of workpiece.

Sturdy Multi Chamber section

The multi-chamber system builds superior torsion-resistance and maximizes the rigidity of the double roller carriage, assuring precision movement

For the professionals who value multi-functionality and precision workmanship

Combiplaners are combined Surfacer & Thicknesser m/cs. These are same high value machines like Combimax, but with fixed top. Combining precision and multi functionality in a machine that can work wonders for a professional set-up.

• Model No.
• J-1014, J-1015, J-1019, J-1025

Easy & fast changing of saw-scoring blades

The machine allows the ease of scoring adjustment from front side. Entire saw unit is on heavy duty cast-iron trunnion.

Smooth-running and powerful saw unit

It is a powerhouse produced with the latest manufacturing technology. The saw shaft runs incredibly smoothly, because it is electronically balanced as a fully assembled unit, and extensive use of cast components in the making. The high precision vertical movement of the unit is linear with maintenance -free guide bearings & allows the whole unit to tilt easily & precisely to exactly the correct angle.

Eye-level operating panel for the ease of operation

All major control functions are always visible. The panel pivots into the most convenient position & is accessible from both sides of the machine.

Digital Read Out (DRO) Optional

Crosscut mitre fence is equipped with DRO that displays the job length digitally. This enables a setting precision accuracy of +/- 0.1 mm.

PUR Glue Tank(Optional)
Applicable for Models J-5200, J-5300 & J-5700.
High water and heat resistance.
Good adhesion on different edge composition.
High resistance of solvent.
No Glue line.
Easy change over of EVA Glue tank.
Low working temperature : 110C to 155C.
Glue pot capacity : 2 kg.

Round Cornering :
A)Compact and powerful high frequency two motors guarantees best finish on edge, sliding on two heavy prismatic guideways with recirculation ball bearings
B)Trimmer 2R cutter for PVC/ABS gives perfect rounding on edge of straight, chamfered and post formed panel

Gluing, Banding & Edge Cutting :

A)Innovative pre-melting sensor operatedTeflon Coatedglue tank havingglue drop system to automatically maintain require glue level in tank, so glue spreading roller provides precise & consistent glue application without glue overheating to avoid wastage of glue, which result into less than 50% consumption of glue, compare to other Edge banders
B)Perfect adhesion to the applied edge with 3 pressure rollers actuated by pneumatic cylinders
C)Heavy duty knife with pneumatic pressure cuts the PVC/ABS edge banding materials up to 50mm height & 3mm thickness

Pre -Milling (For J-5700PRc.in) :
A)An optimal unit for panel edge pre-milling with two high frequency compact motors
B)Individual pneumatic cylinder prepares perfect panel for gluing
C)Smooths the panel for achieving perfect joint line of the edge

Edge Scraping & Cleaning Agent :

A)Gives the best finishing touch to the PVC/ABS edges , leaving no trimming marks on the panel
B)Unit complete with rotating copiers
C)Scraping unit with an extraction hood complete with a suitable container and filter for long chips.
D)In order to prevent glue to adhere on panel, this liquid is sprayed to lower & upper edge surface of the panel