Jai Industries

Rakhial, Ahmedabad, Gujarat

Salient Features :

• The machine has a specially designed hylum surface working table for heat insulation and side roller support at both ends, which helps in easy movement and feeding of workpiece on the table.
• The machine guarantees perfect glueing on board as well as on tape at all times and is versatile and suitable to be used by small and large manufacturers.

Salient Features :

• The most efficient entry-level edge-bander, the panel industry can get in this category. Do all your basic edge-banding work on it with Euro standard features like optimal and consistent glue-spreading, heat bonding and pneumatic edge-cutting.
• The machine guarantees perfect glueing on board as well as on tape at all times and is versatile and suitable to be used by small and large manufacturers.

Salient Features :

• Machine is light in weight, so it can be used for large size boards where the job is fixed onto a table & machine can be used on it.

Model: J-5300PRc.inSalient Features :-

• Sturdy built heavy-duty machine to suit Indian working condition for precise application of edge banding material.
• Innovative pre-melting sensor operatedTeflon coatedglue tank, which consumes less glue, compare to other edge banders, which results to increase in profits.
• High frequency compact motors sliding onheavy prismatic guide waysfor perfect finishing with trouble free performance.
• Automatic lowering of the glue temperatureafter a temporary non-use of the machine.
• Overall meter run (OMR) of edge band tape is display in PLC.
• Project meter run (PMR) is to calculate total usage of edge band tape in a particular project.
• Edge scraping unit with an extraction hood complete with a suitable container
• All electronic & pneumatic parts are from well known international brands
• Very easy to operate & nominal setting required during operation
• Auto lubrication ensuring longer machine life, safe opration, reduced unscheduled downtime and more economical oprating costs.
• Low maintenance m/c, easy available cost effective spares, best service support

Salient Features :

• Automatic boring machine equipped with 1 horizontal & 2 rotating vertical boring heads (0-90) with 21 spindles for executing holes in a line for the wardrobe - side processing.
• Motorised vertical head with electronically programmed.
• Heavy duty frame to hold boring heads with Quick change spindles chucks.
• Elegantly designed, Smart Touchcontrol panel.

Salient Features :

• Heavy duty frame to hold boring heads with Quick change spindles chucks.
• Semi automatic boring machine equipped with 1 horizontal & 2 rotating vertical boring heads (0-90) with 21 spindles for executing holes in a line for the wardrobe - side processing.
• Elegantly designed, electro-pneumatic control panel.

J-2100.in (Single Head) Multi Boring is also available

Salient Features :

• Heavy duty frame to hold boring heads with Quick change spindles chucks.
• Pneumatic cylinder for head tilting of the tiltable head assembly from 0-90 degree.
• Elegantly designed, electro-pneumatic control panel.

Salient Features :

• Heavy duty frame to hold boring heads with Quick change spindles chucks.
• Easy setting for depth
• Elegantly designed, electro-pneumatic control panel.

Salient Features :-

• 8 pneumatic cylinders for uniform pressure on work-piece through forming rail for better bonding of laminate.
• Facilities for dry runs and manual runs provided for settings and trials.
• Auto post-forming cycle with variable heating time, stop and go time & holding time, can be adjusted to profile.
• Drive motor with brakes, to avoid slippage of rotary motion of the heater frame.

Salient Features :-

• Machine suitable for pressing various types of lamination on MDF, particle, plyboards, conposite wood cork boards, fiber board, honey comb board for furniture industries.

Standard Features :-

• It is used to cover laminates / papers / acrylics / veneers / PVC foil on the materials such as MDF, particle board / plywood
• Hard rubber rollers and four heater elements, that ensures perfect fix of laminates on board.
• Motorized up / down movement for thickness adjustment.
• No waiting period like other press, No limit to the workpiece length, easy to use.
• Consumes less energy as compare to other press.
• Adjusting roller speed and temperature gives the best results.

Salient Features :-

• Used for applying a uniform lamination of PVC & Decorative papers till 0.4mm on top surface & borders on flat & designed work piece having smooth shape.
• Vacuum lamination with 3hp heavy duty German pump with IR bulbs.
• One set of tray minizer with m/c for optimal usage of work tray.
• Silicon membrane offered for veneer application on flat surface only.

Salient Features :-

• Used for applying a uniform lamination of PVC & Decorative papers till 0.4mm on top surface & borders on flat & designed work piece having smooth shape.
• Vacuum lamination with 3hp heavy duty German pump with IR bulbs.
• One set of tray minizer with m/c for optimal usage of work tray.
• Silicon membrane offered for veneer application on flat surface only.

Salient Features :-

• Heavy duty rigid construction to take care of thermal destoration with specially designed platens to have uniform temperature distrubution system throughout its surface.
• Suitable for pressing & laminating of fibre boards, decorative papers, plywood & other lamination sheets on Particle / MDF / HDF board.

We are offering auto edge banders.

We are offering cnc boring mill.Why choose cyflex f900?it carries out all boring operationsit carries out groovingno operator's intervention forworktable toolingvery compact overall dimensions

Salient Features :-

• Heavy duty machine suitable for diffrent application like moulding, routing, arch moulding, rebating, grooving, tenoning.
• Ground and electronically balanced spindle for vibration free operation.
• Two diffrent spindle speeds for selection depending on tool diameter and application.

Salient Features :-

• Widely used for sanding multi-plywood, MDF, Particle board, Solid wood panel, door, window, wood plastic composite material, etc.
• RP model: Single head sander is designed for fine surface polishing.
• R-RP model: Double head sander is designed for thickness calibration, surface sanding and fine surface polishing.
• Polishing pad can be adjusted up-down to change the pressure acording to different workpiece.
• Electronic pneumatic abrasive belt tention and conveyor belt tention system.

Special Design machine for Rebating & Moulding in single operation for door frame

While process of rebating, both circular saws cutting thoroughly on workpiece, results we got reusable strip from rebate.

• Model No.
• J-1510 (A)
• Standard Accessories :-

  01 no. ele. motor of 3HP/1440 RPM, 01 no. ele. motor 2HP/1440 RPM, 01 no. ele motor 3HP/2800 RPM, 01 no. Gear box with 0.5HP ele. motor, Electrical panel, Motor pulley - 03 nos., motor plate, V-belts, Extension table with support-02 nos., toolkit & m/c. manual.

A high - quality Drum Sander with more & better features

High quality conveyor belt for long service life. Variable feed speed for precision work of diffrent sanding application.

• Model No.
• J-1812, J-1824, J-1842
• Standard Accessories :-

  3 Phase / 1440 rpm 3 hp & 0.5 hp ele. motor (for Model no J-1812), 5 hp & 0.5 hp ele. motor (for Model no J-1824), 7.5 hp & 1 hp ele. motor (for Model no J-1842), control panel, sanding belt, toolkit & m/c manual

  Note:Use Dust Collector for superior performance

Salient Features :-

• Machine suitable for pressing various types of lamination on MDF, particle, plyboards, conposite wood cork boards, fiber board, honey comb board for furniture industries.

Preferred by wood-working workshops for its Precision workmanship, Multi-faceted utility, trusted performance and rugged durability

These are preferred by wood-working workshops for its enhanced utility, trusted performance and rugged durability.

• Model No.
• J-4013, J-4018
• Standard Accessories :-

  Electric motor 1no. - 1440rpm (3 Phase), 4 planer blades fitted in cutter block, toolkit & m/c manual.

Designed for mass production of straight & angular mouldings. Built for rugged durability

Single and Double Auto Mould models are available. Work table can be tilted for angular moulding and V-notch table helps for moulding on square work piece.

• Model No.
• J-505, J-507
• Standard Accessories :-

  Moulding block 2 no. each of 1.5" & 3" length (for J-507), Moulding block 1 no. each of 1.5 & 3" (for J-505), motor pulley, motor fixing plate, washers set. moulding V-block & toolkit

Heavy duty high quality specially designed machine for cutting mass production.

Precise heavy duty wide sliding table for smooth operation. 45 tilting arbour for angular cutting. Ripfence with fine setting for precise positioning for cutting. Specially machine of plywood industries precise cutting 8'x 4' boards.

• Model No.
• J-1634
• Standard Accessories :-

  01 No-5HP / 1440 RPM electric motor, motor pulley, motor fixing plate, starter, V-belt, sliding table & extension table with support, mitre guage, saw guard, mitre gauge with Wood clamping facility, toolkit & m/c manual.

A high - quality Sander designed for intricate contour sanding operations

The rubber drum can be fitted on both ends to fully utilize the entire spindle.

• Model No.
• J-802
• Standard Accessories :-

  1 no. ele motor 1 HP/1440 RPM, 05 nos different sizes of rubber rolls, table inserts, electrical switch, toolkit & m/c manual.

High quality sander for sanding Horizontal & Vertical

Sanding platen can be adjusted horizontally or vertically for surface sanding.

• Model No.
• J-800
• Standard Accessories :-

  1 no. ele motor 1.5 HP/2800 RPM (3-phase), sanding belt, mitre gauge, end table, starter, toolkit & m/c manual.

A high - quality combo Sander for small work shop to suit budget.

Bench type belt sander to be used vertically, horizontally or any where in between. 10" disc for fast stock removal.

• Model No.
• J-710

Standard Accessories :-

Sanding belt, sanding disc, motor pulley.

Extra Accessories:-Stand for motor fixing.

Precision workmanship for master joint makers, to make perfect square slot.

Heavy duty machine with specific chisel tool makes chisel mortising so easy for single component square slots. Pneumatic head lowering for greater safety, precision and easy operation.

• Model No.
• J-1920
• Standard Accessories :-

  01 no. electric motor of 1 HP-2800 RPM-3 phase, R/F Switch, " chisel set, drill chuck, toolkit & m/c manual.

  Note:Must use better quality Chisel for good performance of Machine.

Precision workmanship for perfect rectangular slots in Max Machines

Heavy duty machine with specific chain tool makes chain mortising so easy for single component of rectangle slots.

• Model No.
• J-930(H)
• Standard Accessories :-

  1 no. electric motor of 3 HP/1440 RPM-3 phase, " chain set, R/F switch, oil bowl, grinding wheel & V-belt fitted in grinding attachment, toolkit & m/c manual.

  Note:M/c with motor of 1.5 HP 1-phase at extra cost.

Various tenon axis angle, Variable speed for cutting

Tenoning width & depth is adjustable within specified limits, The tenoning axis can be horizontal, vertical or 45 by changing the data in PLC unit.

• Model No.
• J-1941

Essential machine for all furniture's making unit to regrind of planer blade.

Grinding process by handwheel is so smooth dua to gear type design.

• Model No.
• J-234, J-235, J-236
• Standard Accessories :-

  Grinding wheel safety guard, motor pulley, motor plate

  Extra Accessories :Grinding wheel

Essential machine for all furniture's making unit to regrind of planer blade.

Grinding process by handwheel is so smooth dua to gear type design.

• Model No.
• J-234 C, J-235 C, J-236 C
• Standard Accessories :-

  Grinding wheel safety guard, motor pulley, motor plate

  Extra Accessories :Grinding wheel

Widely used for low air suction capacity with single bag construction.

Statically balanced high speed impellers give vibration free efficient suction.

• Model No.
• DC-21.in, DC-31.in

Widely used for medium & high air suction capacity with double bag construction.

Statically balanced high speed impellers give vibration free efficient suction.

• Model No.
• DC-32.in, DC-52.in, DC-72.in

We are offering mortisers.

Salient Features :-

• Designed for high speed production routing for getting clean, fast cuts when routing, moulding, making dovetails, grooving, mortising, tenoning & rebatting.
• Pneumatic control up-down movement of spindle through footswitch gives faster setting
• Ground and electronally balanced spindle for vibration free operations

We are offering roller press.It can apply laminate, veneer, pvc , pvc foils, acrylic etc. On the materials suchas chipboard, mdf, plywood etc.Laminating of bright and thin material, on not-so-thick panels is also guaranteedthanks to its pneumatic press andhard rubber rollers. Hard rubber rollers and heating elements, thatensure perfect fix of laminate on board. For bestresults, adjust roller speed and temperatures. no waiting required as on the classic press mcs.No limit to the work piece length. This jai-turanlar mcs consume less energy than that ofnormal presses. With it's in-feed & out-feedtransport benches, it becomes a continuousproduction system suitable for mass production.

Different Routing can be done on any irregular shape of wood.

Engraving can be done on workpiece by copying the design of master jig.

• Model No.
• J-901
• Standard Accessories :-

  Routing work table, R/F switch, 3 nos. different size guide pins, sample cutters 3 nos., collet - 12 mm hole with 8 mm hole sleeve, motor pulley, motor fixing plate, flat belt toolkit & m/c manual

We are offering advanced saw carriage.The saw carriagefeed is driven by rugged wire. Fitted with ashock absorbing cylinder to prevent bumpingwhile it travels to the left side. The scoring blademay be laterally adjusted for a burr freecut or vertically adjusted for proper depth ofcut and to compensate for blade wear.

We are offering cold press.Application :machine suitable for pressing various types of laminations on composite wood, cork board, fiber board. Honeycomb board.having various applications for furniture & boards lamination industries.mainly used to press various glued wood parts in usual temperature. salient features :> manual & semi-automatic controls.> emergency stop switches.> motor overload relay.> machine has characteristics as good splicing effect and fast high efficiency.