Ahmedabad, Gujarat, India
Our Products
The motorized ripfence
It has an accuracy of +/- 0.1 mm. The high precision ball spindle system guarantees precise adjustment of the ripfence.
Smooth-running and powerful saw unit
It is a powerhouse produced with the latest manufacturing technology. The saw shaft runs incredibly smoothly, because it is electronically balanced as a fully assembled unit, and extensive use of cast components in the making. The high precision vertical movement of the unit is linear with maintenance -free guide bearings & allows the whole unit to tilt easily & precisely to exactly the correct angle.
Eye-level operating panel for the ease of operation
All major control functions are always visible. The panel pivots into the most convenient position & is accessible from both sides of the machine.
Heavy duty precision Sliding Table
Runs on large rollers sandwiched between hard chromed guide bars. Hollow multi-chamber alu. extrusion guarantees optimal torsion resistance & rigidity
Sturdy Multi Chamber section
The multi-chamber system builds superior torsion-resistance and maximizes the rigidity of the double roller carriage, assuring precision movement
Easy & fast changing of saw-scoring blades
The machine allows the ease of scoring adjustment from front side. Entire saw unit is on heavy duty cast-iron trunnion.
Digital Read Out (DRO) Optional
Crosscut mitre fence is equipped with DRO that displays the job length digitally. This enables a setting precision accuracy of +/- 0.1 mm.
| Model No | Unit | Promatic 3.2 |
| Sliding Table | ||
| Sliding table length | mm | 3200 |
| Sliding table width | mm | 435 |
| Main Saw Unit | ||
| Max.diameter saw blade | mm | 400 x 30 |
| Saw blade speed | rpm | 3000 / 4000 / 5000 |
| Tilting of saw blade | degree | 90° - 45° (Auto) |
| Max.cutting depth at 90° | mm | 125 |
| Max.cutting depth at 45° | mm | 88 |
| Up-down movement of saw blade | mm | Auto |
| Motor for saw blade | hp | 7.5 |
| Scoring Saw Unit | ||
| Max.diameter scoring blade | mm | 120 x 20 |
| Scoring blade speed | rpm | 8500 |
| Tilting of scoring blade | degree | 90° - 45° (Auto) |
| Up-down movement of scoring blade | mm | Auto |
| Lateral adjustment scoring blade | mm | ±3 |
| Max.depth of cut of scoring blade | mm | 5 |
| Motor for scoring blade | hp | 1 |
| Other Specifications | ||
| Cutting Width / Rip Capacity | mm | 1240 |
| Dimension Main Saw Table | mm | 700 x 1100 |
| Dimension Extension Table | mm | 800 x 1035 |
| Dimension Cross Cut Table | mm | 1500 x 600 |
| Length Cross-Cut Fence | mm | 2000 (telescopes to 3200mm) |
| Dust extraction port diameter | mm | 100 |
| Total power | hp | 8.5 |
Ripfence with fine adjustment
Manual fine adjustment enables the ripfence to be adjusted precisely. The fence can be set with pinpoint precision by means of the adjusting screw.
Smooth-running and powerful saw unit
It is a powerhouse produced with the latest manufacturing technology. The saw shaft runs incredibly smoothly, because it is electronically balanced as a fully assembled unit, and extensive use of cast components in the making. The high precision vertical movement of the unit is linear with maintenance -free guide bearings & allows the whole unit to tilt easily & precisely to exactly the correct angle.
Control Panel & Saw unit up-down wheels
Lifting and tilting of saw unit by means of hand wheels on the machine. Both wheels are placed on front side for more convenience. Along with user friendly control panel with Electronic Digital readout of saw unit tilt.
Heavy duty precision Sliding Table
Runs on large rollers sandwiched between hard chromed guide bars. Hollow multi-chamber alu. extrusion guarantees optimal torsion resistance & rigidity
Sturdy Multi Chamber section
The multi-chamber system builds superior torsion-resistance and maximizes the rigidity of the double roller carriage, assuring precision movement
Easy & fast changing of saw-scoring blades
The machine allows the ease of scoring adjustment from front side. Entire saw unit is on heavy duty cast-iron trunnion.
Digital Read Out (DRO) Optional
Crosscut mitre fence is equipped with DRO that displays the job length digitally. This enables a setting precision accuracy of +/- 0.1 mm.
Model No
| Unit | Pro 3.2 | |
| Sliding Table | ||
| Sliding table length | mm | 3200 |
| Sliding table width | mm | 435 |
| Main Saw Unit | ||
| Max.diameter saw blade | mm | 400 x 30 |
| Saw blade speed | rpm | 3000 / 4000 / 5000 |
| Tilting of saw blade | degree | 90° - 45° (manual) |
| Max.cutting depth at 90° | mm | 125 |
| Max.cutting depth at 45° | mm | 88 |
| Up-down movement of saw blade | mm | Manual |
| Motor for saw blade | hp | 7.5 |
| Scoring Saw Unit | ||
| Max.diameter scoring blade | mm | 120 x 20 |
| Scoring blade speed | rpm | 8500 |
| Tilting of scoring blade | degree | 90° - 45° (manual) |
| Up-down movement of scoring blade | mm | Auto |
| Lateral adjustment scoring blade | mm | ±3 |
| Max.depth of cut of scoring blade | mm | 5 |
| Motor for scoring blade | hp | 1 |
| Other Specifications | ||
| Cutting Width / Rip Capacity | mm | 1250 |
| Dimension Main Saw Table | mm | 700 x 1100 |
| Dimension Extension Table | mm | 800 x 1035 |
| Dimension Cross Cut Table | mm | 1500 x 600 |
| Length Cross-Cut Fence | mm | 2000 (telescopes to 3200mm) |
| Dust extraction port diameter | mm | 100 |
| Total power | hp | 8.5 |
Heavy Duty Precision sliding table with linear bearing developed with advanced technology with multi-chamber system for maximum rigidity of the double roller carriage
Scoring saw precision lever mechanism for manual adjustment controls of the scoring saw.
Anodized alluminum rip fence with sliding system on heavy round bar for parallel cutting up to 1250mm. Fine setting with pinpoint mechanism allows for precise measurements for parallel cuts.
Easy & fast, saw-scoring blades changing. Also entire saw unit on heavy duty cast-iron trunnion.
Smooth-running and powerful saw unit. Runs incredibly smooth, because it is electronically balanced as a fully assembled unit, made of cast components.
The sturdy frame provides a rigid support for all cutting with telescopic cross-cut fence. Also panels to be squared and cuts at an angle up to 45.
| Model No | Unit | J-3200.in.+ |
| Sliding Table | ||
| Sliding table length | mm | 3200 |
| Sliding table width | mm | 415 |
| Main Saw Unit | ||
| Max.diameter saw blade | mm | 355 x 30 |
| Saw blade speed | rpm | 4000 / 5000 |
| Tilting of saw blade | degree | 90° - 45° (manual) with electronic digital read out |
| Max.cutting depth at 90° | mm | 102 |
| Max.cutting depth at 45° | mm | 72 |
| Up-down movement of saw blade | mm | Manual |
| Motor for saw blade | hp | 7.5 |
| Scoring Saw Unit | ||
| Max.diameter scoring blade | mm | 120 x 20 |
| Scoring blade speed | rpm | 8500 |
| Tilting of scoring blade | degree | 90° - 45° (manual) with electronic digital read out |
| Up-down movement of scoring blade | mm | Manual |
| Lateral adjustment scoring blade | mm | ±3 |
| Max.depth of cut of scoring blade | mm | 5 |
| Motor for scoring blade | hp | 1 |
Heavy Duty Precision sliding table with linear bearing developed with advanced technology with multi-chamber system for maximum rigidity of the double roller carriage
Anodized alluminum rip fence with sliding system on heavy round bar for parallel cutting up to 1150mm.
Easy & fast, saw-scoring blades changing. Also entire saw unit on heavy duty cast-iron trunnion.
| Model No | Unit | J-3200 MC |
| Sliding Table | ||
| Sliding table length | mm | 3200 |
| Sliding table width | mm | 375 |
| Main Saw Unit | ||
| Max.diameter saw blade | mm | 300 x 30 |
| Saw blade speed | rpm | 4000 / 6000 |
| Tilting of saw blade | degree | 90° - 45° (manual) |
| Max.cutting depth at 90° | mm | 102 |
| Max.cutting depth at 45° | mm | 72 |
| Up-down movement of saw blade | mm | Manual |
| Motor for saw blade | hp | 7.5 |
| Scoring Saw Unit | ||
| Max.diameter scoring blade | mm | 120 x 20 |
| Scoring blade speed | rpm | 7000 |
| Tilting of scoring blade | degree | 90° - 45° (manual) |
| Up-down movement of scoring blade | mm | Manual |
| Lateral adjustment scoring blade | mm | ±3 |
| Max.depth of cut of scoring blade | mm | 5 |
| Motor for scoring blade | hp | 1 |
Now you have an option that's equivalent to Euro-quality precision machines, with a 'Pride of India' stamp. Panel Saw of maximum strength & rigidity with value added features, with Jai assurance of quality, services and spares.
The table will never require adjustment due to its structure with arch-ground steel slide ways (SCM exclusive & patented solution) so it can carry loads four times higher than others
It has maximum torsional rigidity and total absence of vibration due to closed loop structure, which ensures perfect alignment of the blades during tilted & difficult cuts.
A dedicated gear box fully protected from dust (SCM patented solution) provides smooth, direct transmission & precise blade adjustment every time
| Model No | Unit | SI-400 Nova |
| Sliding table length | mm | 3200 |
| Sliding table width | mm | 360 |
| Max.dia. / bore - saw blade | mm | 400 x 30 |
| Max.dia. / bore - scoring blade | mm | 120 x 20 |
| Saw blade speed | rpm | 3000 / 4000 / 5000 |
| Scoring blade speed | rpm | 8500 |
| Tilting of saw unit - manual | degree | 90° - 45° |
| Motor for saw blade / scoring | hp | 7.5 / 1.2 |
| Approx. net weight | kg | 750 |
Advanced Saw Carriage:An advanced saw carriage with high feed rate driven by rack / pinion and guided on hard guide rods that ensures high cutting accuracy. A uniform holding pneumatic clamping beam ensuring synchronized cylinder actuation at both ends.Saw Carrige Drive Motor:The saw carriage is driven by a motor. Variable feed speed for different applications.
Touch screen with PLC control, provide safety and quick speedy cutting.
Scoring Saw blade Adjustment:Can be adjusted vertically for depth of cut control. Once wear occurred, adjust its position for compensation.The scoring saw blade also can be adjusted laterally for alignment to main saw blade
Three front air floating tables for smooth & better feeding movement of workpiece
| Model No | Unit | J-320 MB |
| Capacity | ||
| Cutting dimensions | mm | 3200 |
| Max. cutting thickness | mm | 80 |
| Main saw unit | ||
| Max. blade diameter | mm | 355 |
| Arbor diameter | mm | 30 |
| Main saw blade speed | rpm | 5600 |
| Main blade projection | mm | 85 |
| Scoring saw unit | ||
| Max. blade diameter | mm | 160 |
| Arbor diameter | mm | 20 |
| Scoring saw blade speed | rpm | 7200 |
| Saw carriage | ||
| Feed speed | m/min | 6-30 |
| Retract speed | m/min | 30 |
| Motors | ||
| Main saw unit, motor | hp | 15 |
| Scoring saw motor | hp | 1 |
| Saw carriage motor | hp | 3 |
| Floating table blower motor | hp | 4 |
| Other Specifications | ||
| Working air pressure | kg/cm2 | 5 to 6 |
| Dust extraction port diameter | mm | 100 |
The pneumatic cutting device can be set to actuate the cut of band for a pre-defined length using an electronic counter.
The glue pot, glue leveler, wiper, extrusion screw and the heating element all make a bonding system.
Hylum surface working table can be tilted from 0 to 45 & a unique "Swivel BAr Roller system" for guiding & supporting the work piece.
Easy accessible user friendly PLC control panel positioned at machine front, for easy & quick operations.
| Model No | Unit | J-3000.in |
| Minimum work piece length | mm | 280 |
| work piece thickness range | mm | 10 - 50 |
| Edge Banding Thickness for PVC & ABS in coil form | mm | 0.4 - 3.0 |
| Min-Radius for curved Edging | mm | 20 |
| Feed speed | m/min | 5 to 12 |
| Front table tilt angle | degree | 0° - 45° |
| Heating element | kw | 2 |
| Electric motor | kw | 0.37 |
| Power supply | voltage / ø | 415V , 3ø |
Efficient bonding system The glue in the glue pot, glue leveler, wiper, the extrusion screw and the heating element all make a bonding system.
Pneumatic cutter on the work table The pneumatic cutting device can be set to actuate the pneumatic cuttur to cut the band. Electronic counter can be used to cut the pre-defined length for curvilinear jobs.
| Model No | Unit | J-2000.in |
| Minimum work piece length | mm | 280 |
| work piece thickness range | mm | 10 - 50 |
| Edge Banding Thickness for PVC & ABS in coil form | mm | 0.4 - 3.0 |
| Min-Radius for curved Edging | mm | 20 |
| Feed speed | m/min | 6 & 12 |
| Front table tilt angle | degree | n/a |
| Heating element | kw | 2 |
| Electric motor | kw | 0.75 |
| Power supply | voltage / ø | 415V , 3ø |
J-2100.in (Single Head) Multi Boring is also available
Salient Features :Horizontal & vertical Boring
For vertical boring application. Both heads work parallel vertically(In Model J-2102.in)
| Model No | Unit | J-2100.in | J-2102.in |
| Max. working thickness | mm | 70 | 70 |
| Max. size of workpiece | mm | 2000 x 640 | 2000 x 640 |
| No. of spindle head | nos | One | Two |
| No. of spindles per head | nos | 21 | 21 |
| Min./ Max. center distance between 2 vertical heads | mm | n/a | 392 / 472 |
| Shank diameter of drill | mm | 10 | 10 |
| Drilling depth | mm |
0 - 50 drill length 70mm |
0 - 50 drill length 70mm |
| Elect. Motor / Total Power | no/hp | 1 x 2 = 2 | 2 x 2 = 4 |
Easy accessible mobile control Panel for convenient operations.
In-feed & out-feed wide conveyers, for mass production.
| Model No | Unit | J-1200.in |
| Maximum Workpiece width | mm | 1360 |
| Maximum Workpiece thickness | mm | 80 |
| Workpiece feed | m/min | 1 - 7 |
| Air Pressure require | kg/cm² | 5 to 7 |
| Total Power | hp | 6.83 |
Self made mold, Heavy Duty and stable casted steel supporting bar.Whole structure processed with heat treatment for long run, error free accuracy.
Linear type 6 auto tool changer with HSK tool holder, which reducing the unproductive time.
Stronger and larger helical rack/ pinion and linear rail.
The Rails are specially protected by hairbrush that installed in the blocks, When the machine in running, the clean rails working all the time. This will keep the rails with long time work without being abrasion and last the life of blocks and bearings in the blocks.
9 kw (HSD) Italian Air Cooled Spindle
A convenient, separate control panel box allows flexibility and efficiency in machine operating. High quality & accurate Syntec system from Taiwan.
Precision Vacuum Table:For vacuumed fixing and sure clamping of the workpiece, to ensure steadiness during the entire routing operations
Additional Vacuum pads 8 pcs for special through cutting work.
| Model No | Unit | J-1325 VT (L-ATC) |
| X-Y-Z axis working area | mm | 1300 x 2500 x 200 |
| X,Y Working Delicacy | mm | 0.0025 |
| X – Y movement | Rack & pinion Gear Drive / Taiwan | |
| Z movement | Heavy Ball Screw 25mm/Germany | |
| Guide |
Y-Axis Linear Guide 30mm - Taiwan HIWIN X Axis & Z Axis Linear Guide 25 mm -Taiwan |
|
| Maximum Speed | mm/min | 50000 |
| Max. Cutting Speed | mm/min | 25000 |
| Spindle-Air-cooling | hp/rpm | 9Kw, (HSD)Italian Air Cooled Spindle,18000rpm |
| Drive motors | Japan YASKAWA Servo Motors | |
| Tool Magazine Type | Linear with 6 Tools | |
| Reducer | Common Belt Gear Box | |
| Working voltage | AC 380V/50Hz, 3 Ø | |
| Command code | G code | |
| Computer interface | USB 2.2 | |
| Collet type & size | ER32(12.7,6,3.175mm) | |
| Compatible Software | Art Cam / Type3 | |
| Controls | Syntec System(Taiwan) | |
| Oil lubrication system | Standard | |
| Vacuum Table & Pump | Standard with 7.5Kw Air Type Pump | |
| Total Power | hp | 21 |
Control panel for controls and display with digital temperature controller and adjustable timer for fully automatic cycle.
Heavy duty 6 cylinders for lifting Steel Platen for uniform pressing of work piece. Steel Platen not only can avoid the Platen broken easily, but also it can very easy to clear the glue which adhibit on the Steel Platen.
| Model No | Unit | J-120T1 | J-120T3 |
| Max. Load / Pressure Rating | Ton/kg-cm² | 120 / 3.6 | 120 / 3.6 |
| Platen Size | mm | 2500 x 1300 x 42 | 2500 x 1300 x 42 |
| Numbers Of Layers | nos | One | Three |
| Opening between layers | mm | 380 | 100 |
| No of Hydraulic Cylinders | nos | 6 | 6 |
| Size of Hydraulic Cylinders | mm | 90 Φ | 90 Φ |
| Heating Power | kW | 18 | 27 |
| Hot oil Delivery Pump Power | kW | 1.12 | 1.12 |
| Hydraulic Pump Power | kW | 4 | 4 |
| Total Power | kW | 23.12 | 32.12 |
Machine suitable for pressing various types of lamination on MDF, particle, plyboards, conposite wood cork boards, fiber board, honey comb board for furniture industries.
Manual & semi-automatic controls, Emergency stop switches, Motor overload relay. Timer control, can set pressing time according to production technology.
Heavy duty rigid construction to take care of pressing distrotion with specially desighned platen and base to have uniform pressure system on workpiece.
| Model No | Unit | J-50T |
| Max.Load On Work Table | Ton | 50 |
| Platen Size | mm | 2500 x 1300 |
| Max.Platen Opening | mm | 1000 |
| No of Hydraulic Cylinders | nos | 2 |
| Bore Size of Hydraulic Cylinders | mm | 125 |
| Installed Power | hp | 5 |
Easy up and down movement of table
Spindle drive assembly easily accessible for belt tension & maintenance
Engraving can be done on workpiece by copying the design of master jig.
| Model No | Unit | J-903 |
| Throat clearance | mm | 750 |
| Spindle rpm | r/min | 8000 / 16000 |
| Guide pin dia. | mm | 6 & 12.7 |
| Shank dia. of cutter | mm | 12 |
| Spindle actuation | - | Pneumatic |
| Installed power | kW | 2.4 / 3 |
