Our Products
Electrical Cables & Wires
2 Products availableLAN Cables
1 Products available
JACCO 3 core flat submersible cables are manufactured keeping in mind the severe and difficult conditions in which they are required to perform. Submersible cables are used for submersible pumps in deep well. Jacco submersible cables are manufactured keeping in mind the hostile environment of installation of the cable in which they have to be performed.
Each cable is manufactured with electrolytic grade bright annealed bare copper conductor, uniformly bunched to ensure flexibility and uniform resistance, which also helps in saving electricity.
The cable is insulated with specially formulated superior grade of PVC compound which offers high insulation resistance and necessary electrical strength. The insulation is resistance to moisture, oils, etc giving long life and electrical safety.
The cores are laid up in flat parallel position. The outer sheath of the cable is made from a special grade of abrasion resistance PVC compound resistant to water, alkalies, moisture, etc.
High quality standards are built into every 'JACCO' product. Rigid tests and checks at every stage, from raw material through manufacturing stages and finally upto the finished product ensure that JACCO Cables meet customer satisfaction.
The above cables are supplied in coils of 90Mtrs. Length or wooden drum of 500 Mtrs.
| 3 Core Flat Cables as per IS:694:1990 | ||||||||
| Conductor | Insulation | Sheath Overall dimensions | Resistance at 20°C (max.) Ohm/Km | Current Carrying capacity @ 40°C Amps | ||||
|---|---|---|---|---|---|---|---|---|
| Area Sq.mm | Number/Size of wire mm | Thickness mm | Core Dia mm | Thickness mm | Overall Width mm | Overall Thickness Mm | ||
| 1.5 | 22/0.3 | 0.8 | 3.24 | 1.15 | 12.8 | 6.0 | 12.10 | 14 |
| 2.5 | 36/0.3 | 0.9 | 3.85 | 1.15 | 14.6 | 6.4 | 7.41 | 18 |
| 4.0 | 56/0.3 | 1.0 | 4.60 | 1.15 | 17.2 | 7.4 | 4.95 | 26 |
| 6.0 | 84/0.3 | 1.0 | 5.10 | 1.15 | 18.7 | 7.9 | 3.30 | 31 |
| 10 | 140/0.3 | 1.0 | 6.60 | 1.40 | 23.7 | 9.9 | 1.91 | 42 |
| 16 | 226/0.3 | 1.0 | 8.00 | 1.40 | 28.0 | 11.4 | 1.21 | 57 |
| Selection Guide for 3 Core Flat Submersible Cables | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1) HP Vs Current: The full load current for submersible pump motors, 3 phase, 50 cycles, 440 Volts. | |||||||||||||||||||
| Hp | 5.0 | 7.5 | 10.0 | 12.5 | 15.0 | 17.5 | 20.0 | 25.0 | 30.0 | 35.0 | 40.0 | 45.0 | 50.0 | 55.0 | 60.0 | 65.0 | 70.0 | 75.0 | 80.0 |
| Amp | 7.5 | 11.0 | 14.9 | 18.9 | 22.5 | 25.2 | 28.4 | 35.6 | 42.3 | 50.4 | 58.1 | 62.1 | 67.5 | 73.8 | 81.0 | 87.3 | 93.6 | 100.80 | 108.0 |
| 2) Derating Factors: Multiply the current carrying capacity of the cable by factors given below for various ambient temperatures. | |||||||||||||||||||
| Ambient Temperature °C | 30 | 35 | 40 | 45 | 50 | ||||||||||||||
| derating Factor | 1.09 | 1.04 | 1.00 | 0.95 | 0.77 | ||||||||||||||
"JACCO" brand PVC Insulated & PVC Sheathed Multicore Flexible Cables are conforming to IS: 694/1990 and are suitable for Fixed Wiring & Flexible Operation. These cables have a wide range of application in machinery, tools, appliances, control panels and industries.
Each cable is manufactured with electrolytic grade bright annealed bare copper conductor, uniformly bunched and having uniform resistance, which also helps in saving electricity.
The cable is insulated with specially formulated superior grade of PVC compound which offers high insulation resistance and necessary electrical strength. The insulation is resistance to moisture, oils, alkalies, grease etc giving long life and electrical safety.
In Multicore cables, the cores are laid up to form the core assembly. The cores are coded with a colour scheme as per IS 694/1990. The sheathing is applied with specially formulated PVC compound to facilitate not only easy stripping but also to ensure toughness to with stand mechanical abrasion while on use.
High quality standards are built into every 'JACCO' product. Rigid tests and checks at every stage, from raw material through manufacturing stages and finally upto the finished product ensure that JACCO Cables meet customer satisfaction.
| Nominal Cross Sectional Area of Conductor Sq. mm | Number/Size of wire mm | Resistance (Max.) At 20°C Ohms/km | Current Carrying Capacity | INSULATION THICKNESS | Core Diameter (Approx.) mm | Nominal Thickness of Sheath | Overall Dimensions (Approx.) | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2 Core mm | 3 Core mm | 4 Core mm | 2 Core mm | 3 Core mm | 4 Core mm | ||||||
| 0.5 | 16/0.20 | 39.0 | 4 | 0.6 | 2.20 | 0.9 | 0.9 | 0.9 | 6.5 | 6.9 | 7.5 |
| 0.75 | 24/0.20 | 26.0 | 7 | 0.6 | 2.40 | 0.9 | 0.9 | 0.9 | 7.0 | 7.4 | 8.0 |
| 1.00 | 32/0.20 | 19.5 | 12 | 0.6 | 2.60 | 0.9 | 0.9 | 0.9 | 7.3 | 7.5 | 8.5 |
| 1.50 | 48/0.20 | 13.3 | 15 | 0.6 | 2.90 | 0.9 | 0.9 | 1.0 | 7.8 | 8.2 | 9.5 |
| 2.50 | 80/0.20 | 7.98 | 20 | 0.7 | 3.60 | 1.0 | 1.0 | 1.0 | 9.5 | 10.0 | 11.0 |
| 4.0 | 128/0.20 | 4.95 | 26 | 0.8 | 4.20 | 1.0 | 1.1 | 1.1 | 11.0 | 11.5 | 13.0 |
