Our Product / Services
Power Plant
1 Products availableMeasuring Instruments & Equipment
1 Products availablePneumatic Machines
1 Products availableWe offer the best product range of Rockewell Hardness Testing Machines, PTIs TWO STAGE AIR COMPRESSOR, Air Conditioning Lab ., Auto Labs and Epicyclic Gear Trains.
Rockwell Cum brinell Type Rockwell cum Superficial TypeApplication Oriented Special Accessories
JPTI STEAM LAB (mini power plant) is rugged in construction . It employs all industrial components. But for the size it is a power plant. It is NON IBR Type boiler with single stage steam turbine. The plant is complete with condenser all measurement system, safety device, pipings, control systems etc. | |||||||||||||||||||
|
Two Stage Air Compressor Test Rig | |
A) The 'J.P.T.I' unit consist of one experimental type two stage reciprocating air compressor air cooled inter cooler , suitable for a pressure of 11 kg/cm2 & having a displacement of 0.168 m3/min. driven by squirrel cage induction motor of 2 H.P. Energymeter & stop watch to determine the input to the motor. The above motor suited for 400/440 V. 3 ph. 50 cycles A. C. supply. The motor is provided with switch & starter. | |
B) Accessories:- The equipment complete with the following standard accessories comprising the following- Two pressure gauges for measuring the pressure, One shut off valve, One non-return valve, pressure release valve. A receiver fitted with oil & water separator a drain cock, automatic pressure switch. | |
C) Air intake measuring arrangement-Air intake measuring device with orifice plate, differently manometer, M.S. air intake reservoir of size 0.4 m. x 0.4 m. x 0.4 m. mounted on a sturdy stand. | |
Air Conditioning Tutor | |
The J.P.T.I.unit consist of a 1.5 m. long rectangular duct at the center of which a cooling coil fitted. A fan drives air over the finned tube cooling in the duct. The refrigerant supply to this cooling coil is achieved through compressor condenser circuit fitted at the base of the table platform. Pressure temperature, flow of refrigerant etc. like this measurements can be achieved at different locations in refrigerant circuit. Thermometers are provided to measure dry bulb and wet bulb temperature of inlet and outlet air. Anemometer for measurement of air flow rate. The duct is insulated with glass wool on all four sides. | |
STUDY AND EXPERIMENT ON BRAKING SYSTEM | |
JPTI braking unit demonstrate the application of brakes with the help of a cut section model, The unit consists of a brake drum, shoes, braking paddel. and the required accessories. | |
A. Cut Section Model :- B. Experimental Model :- | |
2. | STUDY AND EXPERIMENT ON FUEL SUPPLY SYSTEM |
JPTI model of fuel pump is used to study the pumping of fuel for every cylinder in an engine .It is a cut section model. A Fuel supply system mainly works with the help of a fuel pump, air cleaner, fuel filter and fuel line. Fuel pump plays major role in fuel injection. The fuel injection to particular cylinder is arranged to the help of fuel pump. | |
No Experiment is possible to conduct on this system | |
A. Only Cut Section Model :- | |
For Experiment on Fuel Supply system we have to go for Engine Test Rig. | |
3. | STUDY AND EXPERIMENT ON STEERING SYSTEM |
The cut section JPTI model helps to demonstrate the functioning of Steering Gear.The model shows the meshing of worm and toothed roller, pitman arm, sector shaft, needle bearings. Mounted on a MS stand to demonstrate the working. No Experiment is possible to conduct on this system | |
Only Cut Section Model :- | |
4. | STUDY AND EXPERIMENT ON TRANSMISSION SYSTEM |
JPTI Transmission system shows the working of transmission of power . In automatic transmissions two basic parts play an important role. One is Torque Converter and another is Gear System. The Torque Convertor passes the engine power to the gear system. And gear system transmit the power to the rolling wheels. The Transmission system consists of a Gear Box, Propeller shaft, Differential Gear and Fly Wheel. No Experiment is possible to conduct on this system | |
Only Cut Section Model :- | |
5. | STUDY AND EXPERIMENT ON SUSPENSION SYSTEM |
The suspension system is useful for safety of a vehicle in an automotive arrangement. We will be able to demonstrate the working of leaf springs . In few cases a shock absorbers plays an important role.This system consists of Leaf Spring U Bolt and Center Bolt , Spring Shackle and Leaf Spring Clamps. No Experiment is possible to conduct on this system | |
Only Cut Section Model :- | |
6. | STUDY AND EXPERIMENT ON LIGHTING SYSTEM |
JPTI Lighting System consists of battery , Cut our, Head Lamps, Tail Lamps, left & right Indicator , Oil and Battery Indicator Lamps. No Experiment is possible to conduct on this system | |
Only Cut Section Model :- | |
7. | STUDY AND EXPERIMENT ON LUBRICATION SYSTEM |
A Lubrication and Cooling System demonstrate a parameters required for lubricating the automobile vehicle . A Lubrication is mainly essential for the engine parts. This system consists of oil chamber, oil filter , oil pipe lines, oil pump. No Experiment is possible to conduct on this system | |
Only Cut Section Model :- | |
8. | STUDY AND EXPERIMENT ON COOLING SYSTEM |
JPTI Cooling system consists of water cooling pump, water jackets, a radiator ans a fan. A system is useful to demonstrate a functioning of how a engine cooling occurs. No Experiment is possible to conduct on this system | |
Only Cut Section Model :- | |
9. | STUDY AND EXPERIMENT ON IGNITION SYSTEM |
This model includes battery, ignition switch, ignition coil, distributor, spark plugs and wiring. This model will illustrate the operation of an ignition system. No Experiment is possible to conduct on this system . | |
Motorised Gyroscope Apparatus | |
The ' JPTF unit of a motorised gyroscope consist of a disc rotor mounted on a horizontal shaft rotating in the ball bearing of one frame. The rotor shaft is coupled to a motor mounted on a trunnion frame having bearings in the yoke frame which is free to rotate about vertical axis. Thus a disc can be routed about three perpendicular axes. Angular scale and a pointer fitted to frame help to measure precision rate. |
Epicvclic Gear Train & Holding Torque Apparatus | |
The ' J P T I ' unit consist of an epicyclic gear train. Gear train consist of an internal gear having 56 teeth two planet gears with 21 teeth each and sungear having 14 teeth.The train is driven by a 3-ph/l-ph, 1440 R.P.M. motor giving maximum input torque of 0.5 kgm. The planet carrier carries the planet gears. The internal gear is mounted over a flange which rotates in bearings. A pulley is mounted over a output shaft of internal gear. Torque measurement arrangement with spring balanceis provided for both the internal gear and planet carrier, so that either or than can be held stationary and holding torque required for stationary member and out put torque for the other member can be measured. The whole unit is mounted over syurdy frame . motor current is calibrated for input torque of the motor. |
Manual TYpe versatile Simple Operation Confirms national / International Standards
For Plastic, Metals etc.Models for every application simple to operate .