Our Products
Cutting Machine
2 Products availableWe are leaders in the market for providing best range of tool room machines
For grinding HSS and carbide engraving cutter as well as single lip or multiple lip cutters of various shapes such as radius cutters or negative taper angle of cutters. The universal index head is provided at 24 positions so that any particular angle of shape can be obtained, free 360 or 100 rotation is allowed for grinding End Mills Twist Drill, Lathe Tools; only replace the attachment to the index head without any complex setup.
Salient Features
Welding Depth Data
Power | Stainless Steel | Carbon Steel | Aluminum |
---|---|---|---|
1000W | 1.50 mm | 1.50 mm | 0.50 mm |
1500W | 2.50 mm | 2.50 mm | 0.60 mm |
2000W | 3.00 mm | 3.00 mm | 0.80 mm |
Technical Specification
Technical Specification | Unit JK-1000W | JK-1500W | JK-2000W | JK-3000W | |
---|---|---|---|---|---|
Max. Energy of single pulse | J | 100 | 100 | 120 | 125 |
Laser Type | CW Continuous Laser | ||||
Laser wavelength | nm | 1064 | |||
Laser welding frequency | HZ | 1000 | |||
Laser spot diameter | mm | 0.40 - 2.00 | |||
Weld penetration | mm | 0.10 - 3.00 | |||
Power can be adjustable | % | -657315 | |||
Pulse width | ms | 1 | |||
Cooling water temperature | deg. | <35 | |||
Temperature protection | deg. | 40 | |||
Cooling water flow | min. | 15 | |||
Protective gas | Nitrogen gas | ||||
Input power supply | V | Single Phase 220v / 50Hz | Three Phase 380v/50Hz | ||
Machine weight | kg | 390 | 390 | 420 | 560 |
Salient Features
Applications
Repairing wear, tear and erosion of moulds, die and tools, dents and bad corners, foundry defects, TIG defects, etc.
Technical Specification
Specification | Unit | JKMTW |
---|---|---|
Frequency Range | 3-101 Hz Automatic adjustment | |
Output Power | W | 30 |
Power Consume | W | -365115 |
Function | Precise / Normal /, Single / Continous | |
Welding Mode | 0 , 1 , 2 , 3 , 4 , 5 | |
Power | V | AC220V/50Hz |
Weight | Kg | 15 |
Dimension | mm | 350 x 210 x 150 |
Technical Specifications
Specification | Unit | JKEM-03-13 | JKEM-04-20 |
---|---|---|---|
Range | mm | 44998 | 45036 |
Motor | W | 180 | |
Motor Speed | RPM | 4800 | |
Diamond Wheel | CBN1203/300 (SSDC1203/3003) | ||
Collet | 2 Flute, 3 Flute, 4 Flute - 1 Set each | ||
Power | V | AC220V/50Hz | |
Weight | Kg | 25 | |
Dimension | mm | 350 x 230 x 240 |
Technical Specification
Specification | Unit | JKSL-3-16 |
---|---|---|
Collet Diameter | mm | 45001 |
Grinding Diameter | mm | 45001 |
Taper Angle | Degree | 0-180 |
Relief Angle | Degree | 0-45 |
Motor Speed | RPM | 5200 |
Motor | 220V/50Hz 1/3 HP | |
Weight | Kg | 45 |
Dimension | mm | 450 x 400 x 350 |
Salient Features
Standard Accessories
Optional Accessories
Technical Specification
Technical Specification | Unit | ZNC-30 | ZNC-35 | ZNC-45 | ZNC-50 | ZNC-70 | |
---|---|---|---|---|---|---|---|
Working tank ( W x D x H ) | mm | 850x550x320 | 980x560x380 | 1250x730x450 | 1460x880x530 | 2000x1100x600 | |
Working table | mm | 300x500 | 350x630 | 450x700 | 500x800 | 700x1200 | |
Longitudinal travel ( X ) | mm | 300 | 350 | 450 | 500 | 700 | |
Transverse travel ( Y ) | mm | 200 | 250 | 350 | 400 | 600 | |
Quill travel ( Z ) | mm | 200 | 200 | 250 | 250 | 300 | |
Back slide travel | mm | ----- | 200 | 250 | 250 | 300 | |
Quill to working table | mm | 580 | 700 | 730 | 800 | 1000 | |
Max. electrode weight | kg | 50 | 50 | 75 | 100 | 150 | |
Max. workpiece weight | kg | 300 | 500 | 700 | 1000 | 2000 | |
Oil tank capacity | Ltr. | 300 | 350 | 400 | 500 | 600 | |
Servo system for Z axis | DC Servo | ||||||
Machine weight | kg | 1200 | 1300 | 1600 | 1900 | 3500 | |
Machine dimension (LxWxH) | mm | 1320x1150x2060 | 1350x1210x2100 | 1485x1420x2150 | 1600x1600x2200 | 2100x2000x2600 | |
Pulse Generator | |||||||
40A / 40AL | 80A / 80AL | 100A / 100AL | |||||
Max. working current | amp | 40 | 80 | 100 | |||
Max. MRR | mm3/min | 200 | 500 | 600 | |||
Min. electrode wear | % | <0.2 | |||||
Best surface finish | Ra | 0.5 | |||||
Input power supply | V | 3 Phase, AC 415V, 50 Hz | |||||
Connected load | kVA | 4 | 8 | 12 | |||
Controller weight | kg | 110 | 200 | 250 | |||
Controller dimension (LxWxH) | mm | Fitted with machine | 800x540x1700 | 800x540x2000 |
Salient Features
Standard Accessories
Optional Accessories
Technical Specifications
Specification | Unit | ZNC-30S | ZNC-35S | ZNC-45S | ZNC-50S | ZNC-70S | |
---|---|---|---|---|---|---|---|
Work Tank (WxDxH) | mm | 785 x 540 x 320 | 875 x 540 x 380 | 1205 x 600 x 450 | 1255 x 685 x 480 | 1940 x 1050 x 600 | |
Working Table | mm | 500 x 300 | 630 x 350 | 700 x 450 | 800 x 500 | 1200 x 700 | |
Longitudinal Travel (X axis) | mm | 300 | 350 | 450 | 500 | 700 | |
Transverse Travel (Y axis) | mm | 200 | 250 | 350 | 400 | 600 | |
Quill Travel (Z axis) | mm | 200 | 200 + 200 | 250 + 250 | 250 + 250 | 300 + 300 | |
Quill to Working Table | mm | 560 | 650 | 700 | 760 | 1000 | |
Max. Electrode Weight | kg | 50 | 75 | 75 | 100 | 150 | |
Max. Workpiece Weight | kg | 450 | 500 | 700 | 1000 | 2000 | |
Drive System for Z Axis | AC Servo | AC Servo | AC Servo | AC Servo | AC Servo | ||
Machine Weight | kg | 1200 | 1300 | 1600 | 1900 | 3500 | |
Machine Dimension | mtr | 1.50 x 1.20 x 2.32 | 1.60 x 1.25 x 2.50 | 1.90 x 1.60 x 2.40 | 2.00 x 1.60 x 2.50 | 2.10 x 2.00 x 2.80 | |
Pulse Generator | |||||||
Max. Working Current | amp | 30 ( 60AMP & 90 AMP OPTIONAL) | |||||
Max. MRR | mm3/ min | 300 | |||||
Min. Electrode Wear | % | ≤0.1 | |||||
Best Surface Finish (Ra) | µ | 0.15 with mirror function / 0.40 without mirror function | |||||
Power Supply | volt | 3 Phase, AC415V/50Hz | |||||
Connected Load | kVA | 8 | |||||
Dielectric tank | |||||||
Oil Tank Capacity | Ltr | 300 | 350 | 500 | 500 | 800 |
Technical Specification
Specification | Unit | M3-M12 | M3-M16 | M6-M24 | M6-M30 | M6-M36 | M6-M48 |
---|---|---|---|---|---|---|---|
Working Table | mm | 900x600x700 | |||||
Tap Capicity | mm | 3 to 12 | 3 to 16 | 6 to 24 | 6 to 30 | 6 to 36 | 6 to 48 |
Motor | Servo | ||||||
Motor Power | W | 600 | 600 | 1200 | 1200 | 1200 | 1200 |
Motor Speed | rpm/m | 1000 | 375 | 200 | 200 | 125 | 50-250 |
Input Power | V | 220V Single Phase 50Hz | |||||
Weight | Kg | 32 | 32 | 49 | 49 | 67 | 125 |
Machine Dimension | mm | 700x660x220 | 700x660x220 | 810x770x220 | 810x770x220 | 810x770x220 | 1200x1020x240 |
Salient Features
Standard Accessories
Optional Accessories
Technical Specification
Specification | Unit | CNC-540 | CNC-850 | CNC-1260 | CNC-1470 | CNC-1680 | CNC-1880 | CNC-2110 | ||
---|---|---|---|---|---|---|---|---|---|---|
Work Tank (WxDxH) | mm | 1370 x 720 x 450 | 1800 x 1100 x 600 | 2000 x 1300 x 700 | 2550 x 1300x 700 | 2550 x 1500 x 850 | 3000 x 1500 x 850 | 3800 x 1800 x 850 | ||
Working Table | mm | 850 x 500 | 1050 x 600 | 1250 x 800 | 1500 x 900 | 1700 x 1000 | 2000 x 1000 | 2500 x 1200 | ||
Longitudinal Travel (X axis) | mm | 500 | 800 | 1200 | Single : 1400 Double : 850 |
Single : 1600 Double : 1100 |
Single : 1800 Double : 1200 |
Single : 2300 Double : 1450 |
||
Transverse Travel (Y axis) | mm | 400 | 500 | 600 | 700 | 800 | 800 | 900 | ||
Quill Travel (Z axis) | mm | 300 | 400 | 450 | 500 | 500 | 600 | 600 | ||
Quill to Working Table | mm | 690 | 900 | 1000 | 1100 | 1150 | 1200 | 1250 | ||
Max. Electrode Weight | kg | 150 | 200 | 300 | 400 | 400 | 400 | 450 | ||
Max. Workpiece Weight | kg | 1800 | 3000 | 3500 | 5000 | 6000 | 6500 | 8000 | ||
Drive System for X,Y,Z Axis | AC Servo | AC Servo | AC Servo | AC Servo | AC Servo | AC Servo | AC Servo | |||
Machine Weight | kg | 2500 | 4500 | 5500 | Single : 9000 Double: 11000 |
Single : 9000 Double: 12000 |
Single : 13000 Double: 15000 |
Single : 15000 Double: 17000 |
||
Machine Dimension | mm | |||||||||
Pulse Generator | ||||||||||
Max. Working Current | amp | 30 ( 60AMP & 90 AMP OPTIONAL) | ||||||||
Max. MRR | mm3/ min | 300 | ||||||||
Min. Electrode Wear | % | ≤0.1 | ||||||||
Best Surface Finish (Ra) | µ | 0.15 | ||||||||
Power Supply | volt | 3 Phase, AC415V/50Hz | ||||||||
Connected Load | kVA | 8 | ||||||||
Dielectric tank | ||||||||||
Oil Tank Capacity | Ltr | 800 | 1500 | 1800 | ||||||
Oil Pump Motor Power | HP |
Salient Features
Standard Accessories
Application
Technical Specification
Technical Specification | Unit | CNC-4030 | CNC-5040 |
---|---|---|---|
Dimension of working table ( X x Y ) | mm | 400 x 600 | 440 x 630 |
Travel of working table ( X x Y ) | mm | 300 x 400 | 400 x 500 |
Z axis travel ( Z + W ) | mm | 350 + 300 | 350 + 300 |
Distance from quill to table | mm | 50 - 350 | 200 - 500 |
Max. machining current | amp | 30 | 30 |
Drilling range | mm | 0.20 - 3.00 | |
Max. electrode length | mm | 500 | 500 |
Max. workpiece weight | kg | 200 | 300 |
Max. machining speed | mm/min | 30 - 60 | 30 - 60 |
Max. power consumption | kVA | 3.5 | 3.5 |
Drive system for X, Y, Z axis | Servo Motor | ||
Input power supply | V | 3 Phase, 415V , 50Hz | |
Machine dimension | mm | 1200 x 1000 x 2170 | 1300 x 1075 x 2320 |
Machine weight | kg | 800 | 900 |
Salient Features
Standard Accessories
Optional Accessories
Technical Specification
Parameter/Specification | Unit | ECO-20 | ECO-25 | ECO-35 | ECO-45 | ECO-50 | ECO-63 | ECO-80 |
---|---|---|---|---|---|---|---|---|
Working table ( X x Y ) | mm | 270 x 420 | 400 x 560 | 500 x 740 | 600 x 840 | 670 x 1000 | 770 x 1180 | 990 x 1360 |
Working travel ( X x Y ) | mm | 200 x 250 | 250 x 320 | 350 x 450 | 450 x 550 | 500 x 630 | 630 x 800 | 800 x 1000 |
Max. thickness of work piece | mm | 300 | 300 | 400 | 400 | 500 | 700 | 700 |
Max. taper | Deg./mm | ±3 Deg /100 | ||||||
Max. cutting speed | mm2/min | 120 / (200 High Speed Controller) | ||||||
Optimum roughness | um | 1.5 | ||||||
Electrode wire diameter | mm | 0.12 To 0.18 | ||||||
Power consumption | kVA | 3 | 3 | 3 | 3 | 4 | 4 | 4 |
Input power supply | V | 3 Phase. 415VAC, 50Hz | ||||||
Max. work piece weight | kg. | 200 | 200 | 300 | 400 | 800 | 1000 | 1500 |
Working liquid | DM water | |||||||
Min. input command | mm | 0.001 | ||||||
Overall weight | kg. | 800 | 900 | 1200 | 1400 | 2400 | 3200 | 4500 |
Dimension of machine | mtr | 1.5x1.0x1.4 | 1.5x1.0x1.4 | 1.6x1.3x1.7 | 1.7x1.5x1.7 | 2.0x1.7x1.7 | 2.2x1.9x1.9 |
Salient Features
Standard Accessories
Technical Specification
Parameter / Specification | Unit | JK-404 | JK-606 | JK-609 |
---|---|---|---|---|
Working Table (X x Y ) | mm | 440 x 440 | 620 x 620 | 620 x 920 |
Working Travel (X x Y) | mm | 400 x 400 | 600 x 600 | 600 x 900 |
Travel ( Z axis ) | mm | 200 | 200 | 200 |
Feeding Height (Z axis ) | mm | 200 | 200 | 300 |
Position accuracy | mm | 0.01 / 300 | ||
Repeatability | mm | 0.008 | ||
Spindle speed | rpm | 6000 - 24000 | ||
Spindle power | kw | 2.2 kw ( Water cooling ) 3.2 kw, 4.5 kw & 5 kw (Optional) | ||
Control system | NC Studio / DSP / NK105 / NK280 / SYNTEC 6MA | |||
Drive system | Steeper / Servo | |||
Max. rapid travel speed | m/min | 6 | ||
Max. working speed | m/min | 3 | ||
Input power supply | V | Single phase, 220VAC (3Phase 415VAC , 50Hz Optional) | ||
Gross weight | kg | 500 | 800 | 1000 |
Over all dimension | mm | 850 x 800 x 800 | 950 x 850 x 850 | 1000 x 1300 x 1000 |
Machine Introduction
Universal tool and cutter Grinder are used to sharpen milling cutters and tool bits. Our sigma UTC series Is extremely versatile machine useful for surface grinding and grinding of complex shapes. Our sigma UTC series comes with variety of optional accessories and fixtures. set-up can be created and combined to complete many operations.
Universal Tool and Cutter Grinder
Salient Features
Functional Versatility
Standard Accessories
Optional Accessories
Technical Specification
TECHNICAL SPECIFICATION | UNIT | SIGMA UTC 250TM | SIGMA UTC 250T | SIGMA UTC 280T |
---|---|---|---|---|
CAPACITY | ||||
Max. swing on std. Centre | mm | 250 | 250 | 280 |
Swing with Raising Blocks | 350 | 350 | 380 | |
Length between Work head and RH Tailstock | mm | 330 | 520 | 610 |
Admit between Centers | 440 | 670 | 760 | |
Max. Height Center of wheel above Table | mm | |||
TABLE | ||||
longitudinal transverse | mm | 400 | 480 | 510 |
Cross Traverse | 200 | 250 | 250 | |
Swivel eit1er side of Centre (End Scale) | degree | 9 | 9 | |
Swivel LHIRH of Column (Centre Scale) | ||||
Size of Table | mm | 850x115 | 920 x 140 | 1040 x 140 |
WHEEL HEAD | ||||
Vertical adjustment of Wheel Head | mm | 210 | 210 | 290 |
Swivel | degrees | 360° | 360° | 360° |
Tilting in either Direction | degrees | 180°+ | 180°+ | 180°+ |
r.p.m. | 3800 5600 | 3800 5600 | 3800 5600 | |
Motor Power | KW/HP | 0.75/1 | 0.7S 11 | 0.7S 11 |
SHIPPING DIMENSIONS | ||||
Net weight of the Machine | kg. | 750 | 1150 | 1250 |
kg. | 900 | 350 | 1450 | |
Overall size of Machine L x w x H | mm | 1075x1100x1400 | 1425x1470x1580 | 1425x1470x1580 |
Overall size of Packing case L x W x H | 141 300 550 | 575 575 650 | 1575 1575 1650 |
LCDSEVEN Segment Color Display. Programmable Z axis. 10 step, 10 Position , auto program storage. Built- in 3 axis DRO. Integral Design and Compact Footprint. Turcide coated slides driven by ball screw. Double Door, Large Work Tank. High- Speed Quill Moment with DC Servo motor. Hand-Held, Full Function Remote Control (Optional). Motorized Back Slide Travel (In Bigger Models). Good in carbide material machining. Oil level alarm, Oil Temperature Alarm. Very Low Power consumption. Fire extinguisher with smoke detector. Numerical Controlled X, Y , Z lock function. Self Diagnostic trouble shooting. Sleep Mode. Ampere ( 40 to 100).
Salient Features
Standard Accessories
Optional Accessories
Technical Specification
Specification | Unit | Universal / Horizontal Milling Machine | Vertical Milling Machine | ||
---|---|---|---|---|---|
TABLE | SU-3S / SH-3S | SU-4S / SH-4S | SV-3S | SV-4S | |
Table overall size | mm | 1550 x 310 | 1900 x 350 | 1550 x 310 | 1900 x 350 |
Table clamping area | mm | 1350 x 310 | 1600 x 350 | 1350 x 310 | 1600 x 350 |
No./width of 'T' slots | mm | 45001 | 45003 | 45001 | 45003 |
Center distance between 'T' Slots | mm | 65 | 80 | 65 | 80 |
Longitudinal movement - power | mm | 975 | 1200 | 975 | 1200 |
Longitudinal movement - manual | mm | 1000 | 1300 | 1000 | 1300 |
Cross traverse - power | mm | 290 | 330 | 290 | 330 |
Cross traverse - manual | mm | 300 | 350 | 300 | 350 |
Vertical Movement - power | mm | 400 | 400 | 400 | 400 |
Vertical Movement - manual | mm | 425 | 425 | 425 | 425 |
MILLING SPINDLE | |||||
Spindle nose taper | - | ISO - 40 | ISO - 50 | ISO - 40 | ISO - 50 |
Quill Movement | mm | - | - | 100 | 100 |
Swivel of milling head | Degree | - | - | 45 | 45 |
SPEEDS | |||||
Speed | steps | 18 | 18 | 18 | 18 |
Speed range | rpm | 35 - 1800 | 35 - 1800 | 35 - 1800 | 35 - 1800 |
FEEDS | |||||
Feed | steps | 20 | 20 | 20 | 20 |
Feed range Longitudinal & Cross | mm / mm | 16 - 800 | 16 - 800 | 16 - 800 | 16 - 800 |
Feed range Vertical | mm / mm | -620820 | -620820 | -620820 | -620820 |
*RAPID TRAVERSE | |||||
Longitudinal & Cross | mm / min | 3200 | 3200 | 3200 | 3200 |
Vertical | mm / min | 800 | 800 | 800 | 800 |
POWER | |||||
Spindle Motor | kW / HP | 5.5 / 7.5 | 7.5 / 10 | 5.5 / 7.5 | 7.5 / 10 |
Feed Motor | kW / HP | 2.25 / 3 | 44989 | 2.25 / 3 | 44989 |
OVERALL SIZE | |||||
Maximum length | mm | 1880 | 2340 | 1880 | 2340 |
Maximum width | mm | 2060 | 2310 | 2060 | 2310 |
Maximum Height | mm | 1830 | 1855 | 2210 | 2340 |
WEIGHT | |||||
Net approx. | kg. | 3150 | 4200 | 3150 | 4200 |
Gross approx. | kg. | 4000 | 5000 | 4000 | 5000 |