Post Buy Requirement

Our Product / Services

  1. Testing Equipment 3 Products available
  2. Material Testing Labs & Services

    2 Services available
  3. Testing Services

    1 Services available
  4. Instrument Calibration & Testing

    1 Services available
  5. Measuring Instruments & Equipment

    1 Products available
  6. Spectrometers

    1 Products available
  7. Generators

    1 Products available
  8. Others Products / Services 9 Products / Services available

Products / Services

Our offered Product range includes DC load, integratingsphere, Battery Testing Service, Household Applience Testing and Bis Testing Services.

Integratingsphere

We are offering integratingsphere.diameter: is-0.3m (0.3m)is-0.5m (0.5m)is-1.0m (1.0m)is-1.5m (1.5m)is-1.75m (1.75m)is-2.0m (2.0m). Other sizes can be designed according to the customers request.the painting of integrating spheres is according to cie pub.no.84(1989)material: pure barium soleplate (baso4)baso4 coating: ()0.96(450nm800nm) and ()0.92(380nm450nm)fine diffuse reflection: reflectance0.8 and accuracy of ()
View Complete Details

Dc Load

We are offering dc load.M9811 is applicated in production line(cell phone charger, cell phone battery, electric vehicle battery, switching power supplier, linear power supplier, led driver), research insititutes, automotive electronics, aeronautics and astronautics, ships, solar cells fule cell, etc.b.Feature:six high speed operation modes: cc, cr, cv, cw, cc+cv, cr+cwover current, over voltage, over power, over heat, polarity reversed protectionhigh-luminance vfd screen with two lines& four channels displayintelligent fan system fan will be automatically initiated according to the temperaturesoft start time setting, carrying the power supplier according to the voltage value setbattery testing and short-circuit functionavailable of dynamic testing and rising edge and falling edge settingsupporting external trigger input and outputexternal current waveform monitor terminalsupporting remote voltage compensation and multi-data storagepower-on-self-test, software calibration and standard rack mountit can do led power driver test, compactible with simulating the capacitances sensitive driverarbitrary waveform editing in list functioncommunication mode: rs232rs485usb.
View Complete Details

Goniometer

We offer goniometer. Measurement:luminous intensity data, luminous intensity distribution, zonal luminous flux, luminaries efficiency, luminance distribution, coefficient of utilization, luminance limitation curves glare, maximum ratio of distance to height, equal illuminance diagrams, curves of luminaires vs lighting area, lsocandela diagrams, efficient luminescence angle, etc. Features:many national patents pending on hardware and software. cie class a & constant temperature photo detector (class l detector can be optional). high degree of intelligent and test function is complete. the rotation motor is from japan mitsubishi motors and it uses german angle decode system, it will help smoothly and high accuracy rotation. It is very stable when start and stop. the working principles are according to iesna and cie. This instrument is specially recommended by lm-75, lm-79 and cie121-1996. with some optional instruments, it has good expanding functionsthe position and working state remain the same as it is under working. special collimation device with laser cross line, conveniently and accurately fix the position of the tested luminaries. Specifications:the tested luminaire rotates around the mirror with an angle of ()180(or 0-360) and the tested luminaire rotates around itself with an angle of (c)180(or 0-360). the accuracy of angle: 0.0016 resolution of angle: 0.01accuracy of photometry: cie class a (standard class) or class l. the test result can be exported as cie, ies, ldt and other format files. This kind of format files can be transferred by other illumination and luminaire design software such as dialux. rs-232c standard interface can be connected to pc, english version software can run in winxp or win7
View Complete Details

Spectrometers

We are offering spectrometers.Lms-9000alms-9000b is according to lm-79 clause 9.1. It is designed to have a capability of producing any visible spectral distribution, mimicking various light sources in the visible region by feedback control of the radiant power emitted by individual leds. This led test system will be used as a transfer standard for photometric, colorimetric and radiometric applications.Lms-9000b is quick test with high accuracy, it used in scientific lab test. Due to the test speed and lms-9000b can work with lsg-1600blsg-1800blsg-1900lsg-2000 goniophotometer to do the spatial color and spectrum test.Measures:colorimetric: chromaticity coordinates, cct, color ratio, peak wavelength, half bandwidth, dominant wavelength, color purity, cri, spectrum testphotometric: luminous flux, luminous efficiency, radiant power, pupil flux, pupil flux efficiency, pupil factor, cirtopic fluxelectrical: voltage, current, power, power factorspecifications:spectral range wavelength: 380nm800nmspectral wavelength accuracy: 0.5nm, wavelength reproducibility: 0.2nmsample scanning steps: 0.1nmaccuracy of chromaticity coordinate (x, y): 0.003 (lms-9000a) and 0.002 (lms-9000b)correlated color temperature cct: 1, 000k100, 000k, cct accuracy: 0.3%color rendering index range: 0100.0, accuracy: (0.3%rd0.3)photometric linear: 0.5% (lms-9000a) and 0.3% (lms-9000b)stray light:
View Complete Details

Led Driver Tester

We are offering lsled-12 led driver on line tester is according to iec62384:2011 and gbt 24825-2009.the tester includes a group measuring module and b group measuring module. The a group measuring module can test 6pcs led driver ac parameters. The b group measuring module can test 6pcs led driver ac, dc and acdc parameters.there are 12 windows to display the input and output parameters, it is good for comparing and analyses.quick test for all of the parameters in 0.1seconds.it can set up the testing parameters passfail range, it will have noiselight warning if it is fail. We also supply handle port (extra cost)software communicate with pc (extra cost)specification:1) a group measuring module (for ac parameters testing):measuring input voltage, current, power and power factorvoltage and current fundamental frequency: 45hz65hz, response frequency: 45hz1mhzvoltage range: 0.15300v (cf=1.67), current range: 1.5ma2.7a (cf=3), power range: 0.015800w, power factor range: 0.0001.0002) b group measuring module (for ac parameters testing):measuring output voltage, current, power and power factorvoltage range: 0.15300v (cf=1.67), current range: 1.5ma2.7a (cf=3), power range: 0.015800w, power factor range: 0.0001.0003) b group measuring module (for dc parameters testing):measuring lamp voltage, current, power and ripple currentvoltage range: 0.15500v, current range: 1.5ma8a, power range: 0.0154000w, ripple current range: 5ma2.5a
View Complete Details

Surge Generator

We are offering automatic lightning surge generator (or lightning surge immunity) sg61000-5 is used to assess the power cord and connect the internal switch stood in line to connect the internal switch to provide a common basis for switching the natural world and lightning caused by the high-energy transient interference performance. Performance fully meets the iec 61000-4-5, en61000-4-5 and gbt17626.5 standards.Specifications:product model sg61000-5 sg61000-5t sg61000-5hwave generator combination wave combination wave combination wave ccitt(option)output voltage (open) 1.250s20% 1.250s20% 1.250s20% 10700s20%output current (short) 820s20% 820s20% 820s20% 5320s20%output impedance 2 2 2 and 500 40output voltage range 06kv10% 06kv10% 010kv10% 06kv10%output current range 03ka10% 03ka10% 05ka10% 0150ka10%operation mode automaticsurge repetition 19999 times 19999 times 19999 times 19999 timesinterval time 209999s 209999s 209999s 209999spolarity positive, negative or positivenegative automaticphase shift asynchronous, synchronization 0 360 or specific angle nacouplingdecoupling network (cdn) includes a 16a single phase cdn includes a 20a 3phases cdn includes a 20a 3phases cdn built-in 30a 3phases cdnworking power ac220v(option 110v)10%, 5060hzdimensions (wxdxh) 44x45x35cm 44x45x20cm and 44x45x35cm (cdn) 44x45x20cm and 44x45x35cm (cdn) 56x69x157cm (with cabinet)gross weight about 30kg about 48kg about 48kg about 300kgtouch screen with super big lcd and built-in windows ce
View Complete Details

Electrical Safety Tester

We are offering electrical safety tester.The ls9934ls9935 automatic safety test system is according to gb4706.1, iecen60335-1, ul60335, gb7000, iec60598, gb4943, iec60950 and gb9706.1. It used for luminaries, home application and motor tools safety test in production line or lab r&d.Specification:display all setting parameters and testing results in the same big lcd menuit can set the passfail limit value. It will have lightnoisy to warningincludes the handle to do remote operatetest mode programmable; quick discharge, 50 memory groups, 8 steps per groupsupport 50hz and 60hz frequency; electric safety wall detecting featurethe ls9934 can do test for withstand voltage (acw), insulation resistance (ir), leakage current (llc) and ground resistance (gr)the ls9935 can test for withstand voltage (acw), insulation resistance (ir), leakage current (llc), ground resistance (gr) and powerwithstand voltage test (acw) insulation resistance test (ir)voltage range accuracy current range ir range accuracy voltage rangeac1005000v (1.5%+3v) 0.00540.00ma 0.503000m 5%+0.5m dc1001000vleakage current test (llc) grounding resistance test (gr)llc range accuracy voltage range gr range accuracy output current0.00520ma (1.5%+0.005ma) ac5.0300.0v 0600m (1.5%+3m) ac3.0030.00apower testvoltage current power pf accuracy test time03000v 04.5a 21000w 0.21.000 class 0.5 0999.9s
View Complete Details

Esd Tester

We offer esd tester. Esd simulator (electrostatic discharge generator or electrostatic gun) is in full compliance with iec 61000-4-2, en61000-4-2, iso10605, gbt17626.2, gbt17215.301 and gbt17215.322. The esd generator is designed for the assessment of electrical and electronic equipment to withstand esd performance. Esd61000-2esd61000-2a has lcd display in both english and chinese, they equipped with an infrared remote control which can allow you do the test in some special place. Specifications:product model esd61000-2 esd61000-2aoutput voltage 0.120kv5% 0.130kv5%polarity positivenegative positivenegativeenergy storage capacitance 150pf10% (replaceable) 150pf10% (replaceable)discharge resistor 3305% (replaceable) 3305% (replaceable)current rise time 0.61ns 0.61nstesting functions single, count, 20pps, air, contact, iec level single, count, 20pps, air, contact, iec leveltrigger mode manualauto manualautonumbers of discharge 19999 19999repetition 0.05s99.99s 0.05s99.99sworking power ac220v(option 110v)10%, 5060hz ac220v(option 110v)10%, 5060hz touch screen with super big lcd and built-in windows ce
View Complete Details

Battery Testing Service

We are offering battery testing service as per is 1651as per iec: 60896-11a. Verification of constructional requirementa. Capacity testb. Marking & packingb. Charge retention testc. Verification of dimensionc. Endurance in discharge-charge cycled. Ah and watt hr efficiency testd. Endurance in over charge e. Test for suitability for floating battery operation f. Short circuit and internal resistance test
View Complete Details

Household Applience Testing

We are offering household applience testing.Motor operated kitchen appliances, electric irons, floor treatment machines, warming plates, refrigerators, appliances for heating liquids, appliances for skin and hair care, ice makers, hair dryers, vacuum cleaners, heating appliances, air conditioning devices, washing machines, pumps, insect killers, ironers , stoves, humidifiers etc. Testing as per iecen 60335 , is 302
View Complete Details

Bis Testing Services

We can do testing as per is standard of the led driver , luminary , cables , control panel , lab instrument , testing instruments , power supply , information technology equipments , pda , keyboards , junction box , cable tray , electric motor , process control instruments , etc.
View Complete Details

Led Luminaires Testing Services

We are offering led luminaires testing services.Fixed general purpose luminaries, luminaries for road and street lighting, aquarium luminaries, lighting chains, emergency lighting, general safety testing for luminariesmarkingconstructionexternal and internal wiringprovision for earthingprotection against electric c shockresistance to dust, solid objective and moistureinsulation resistance and electric strength.Creepage and clearances distancesendurance and thermal testresistance to heat , fire and trackingscrew terminalsscrewless terminals and electrical connections led-lamps , led bulb , led based street lights , flood lights , tube lights , dc or ac supplied electronic control gear for led modules , indoor-outdoor led luminaires etc popular standards for led product testing are lm 79 , is 16106:2012 , iec 61347-2-13 , iec 62384, iec62722-2-1, iec 62031, is 15885(part2sec13), is 16103, is 16102, iec 62612, iec 60969 etc
View Complete Details

LM 79 Testing For LED Product

We, ITC India, are a leading testing companylaboratory having a NABL (Certificate No. T 1811) accreditation. The Laboratory is following the procedure as required by International Standard IEC 17025 and is already certified for ISO 17025 by NABL and IABCBL.Our lab is totally equipped with following high accuracy testing instruments to provide a total testing solution for LED based productHigh Precision CCD SpectroradiometerDigital Power Meter (RS-232 Model)Digital CC and CV DC Power SupplyIntegrating Sphere (Diameter=2.0M)Standard Light Source (24V50W)LED Power Driver TesterElectrical Safety analyzer and moreWe can do the testing of your LED product against the different standard like LM 79, IS 16106, IEC 60598-1, IEC 61347-2-13, IEC 62384, IEC62722-2-1, IEC 62031, IS 15885(part2sec13), IS 16103, IS 16102, IEC 62612, and IEC 60969 etc Also we can help you to get CE Certification.
View Complete Details

Safety Testing Services

We can do safety testing against below international standard likeiec 61010-1 : lab instrumentsiec 60204-1 : control paneliec 60595 : led luminaryiec 61347 : lamp control geariec 60950 : information technology equipmentsiec 60601 : electromedical equipmetsiec 60065 : audio video & similar productiec 61439 : low voltage switchgear & control gear assembliesiec 60034 : rotating electrical machine and more contact us for more information.
View Complete Details

Ip Testing

We have developed a special testing facility against solid particle protection & liquid ingress protection generally called as the ip testing. We have below test facility at present in our lab;1. Ip 1x, ip 2x, ip 4x for protection of machine against penetration by solid foreign objects2. Ip 5x for dust protection3. Ip 6x for dust protection4. Ip x7, ip x8, ip x5 & ip x6 for protection against ingress of water. also we can offer you lm 79 testing for ssl product.
View Complete Details

Cable Gland Testing Services

We are offering cable gland testing services.Bs 6121: specification for mechanical cable glands for elastomer and plastics insulated cables en 62444: cable glands for electrical installations test carries out under this standard. Cable retension test cable anchorage test cable anchorage twist test impact testtorque test ingress protection (ip) test electrical continuity test insulation resistance test and more
View Complete Details

Emc Testing Services

We focus on the following industries product emcemi testing:industrial electronicsconsumer electronicstelecommunicationsmedicalwe can do the following emc testing on your product.Testas per standardelectrostatic discharge immunity test(esd test)iecen 61000-4-2electrical fast transientburst immunity testiecen 61000-4-4surge immunity testiecen 61000-4-5voltage dips, short interruptions and voltage variations immunity testsiecen 61000-4-11limits for harmonic current emissions (equipment input current 16 a per phase)iecen 61000-3-2limitation of voltage changes, voltage fluctuations and flickeriecen 61000-3-3
View Complete Details

Environmental Testing Services

We are offering environmental testing services as per is 9000 & iec 60068- - dry heat- dry cold- damp heat(steady state)- damp heat(cyclic)- damp heat(composite)- humidity freeze(cyclic)- temperature cycling & more.
View Complete Details

Transformer Testing Services

We are offering transformer testing services.Iecen 61558-1: safety of power transformers, power supply units and similar -- part 1: general iecen 61558-1: safety of power transformers, power supply units and similar -- part 1: general requirements and testssome of the test carried out on transformeras per iec 61558 protection against electric shockprotection against harmful ingressoutput voltage and output currentinsulation resistance, dielectricno-load output voltage construction short-circuit voltage creepage distances, clearancesshort-circuit and overload protection
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

List of Other Products by Itc India Pvt Ltd from Ahmedabad, Gujarat.
Post Buy Requirement

Our Product / Services

  1. Testing Equipment 3 Products available
  2. Material Testing Labs & Services

    2 Services available
  3. Testing Services

    1 Services available
  4. Instrument Calibration & Testing

    1 Services available
  5. Measuring Instruments & Equipment

    1 Products available
  6. Spectrometers

    1 Products available
  7. Generators

    1 Products available
  8. Others Products / Services 9 Products / Services available

Products / Services

Our product range contains a wide range of integratingsphere, DC load, Battery Testing Service, Household Applience Testing and Bis Testing Services

Integratingsphere

We are offering integratingsphere.diameter: is-0.3m (0.3m)is-0.5m (0.5m)is-1.0m (1.0m)is-1.5m (1.5m)is-1.75m (1.75m)is-2.0m (2.0m). Other sizes can be designed according to the customers request.the painting of integrating spheres is according to cie pub.no.84(1989)material: pure barium soleplate (baso4)baso4 coating: ()0.96(450nm800nm) and ()0.92(380nm450nm)fine diffuse reflection: reflectance0.8 and accuracy of ()
View Complete Details

Dc Load

We are offering dc load.M9811 is applicated in production line(cell phone charger, cell phone battery, electric vehicle battery, switching power supplier, linear power supplier, led driver), research insititutes, automotive electronics, aeronautics and astronautics, ships, solar cells fule cell, etc.b.Feature:six high speed operation modes: cc, cr, cv, cw, cc+cv, cr+cwover current, over voltage, over power, over heat, polarity reversed protectionhigh-luminance vfd screen with two lines& four channels displayintelligent fan system fan will be automatically initiated according to the temperaturesoft start time setting, carrying the power supplier according to the voltage value setbattery testing and short-circuit functionavailable of dynamic testing and rising edge and falling edge settingsupporting external trigger input and outputexternal current waveform monitor terminalsupporting remote voltage compensation and multi-data storagepower-on-self-test, software calibration and standard rack mountit can do led power driver test, compactible with simulating the capacitances sensitive driverarbitrary waveform editing in list functioncommunication mode: rs232rs485usb.
View Complete Details

Goniometer

We offer goniometer. Measurement:luminous intensity data, luminous intensity distribution, zonal luminous flux, luminaries efficiency, luminance distribution, coefficient of utilization, luminance limitation curves glare, maximum ratio of distance to height, equal illuminance diagrams, curves of luminaires vs lighting area, lsocandela diagrams, efficient luminescence angle, etc. Features:many national patents pending on hardware and software. cie class a & constant temperature photo detector (class l detector can be optional). high degree of intelligent and test function is complete. the rotation motor is from japan mitsubishi motors and it uses german angle decode system, it will help smoothly and high accuracy rotation. It is very stable when start and stop. the working principles are according to iesna and cie. This instrument is specially recommended by lm-75, lm-79 and cie121-1996. with some optional instruments, it has good expanding functionsthe position and working state remain the same as it is under working. special collimation device with laser cross line, conveniently and accurately fix the position of the tested luminaries. Specifications:the tested luminaire rotates around the mirror with an angle of ()180(or 0-360) and the tested luminaire rotates around itself with an angle of (c)180(or 0-360). the accuracy of angle: 0.0016 resolution of angle: 0.01accuracy of photometry: cie class a (standard class) or class l. the test result can be exported as cie, ies, ldt and other format files. This kind of format files can be transferred by other illumination and luminaire design software such as dialux. rs-232c standard interface can be connected to pc, english version software can run in winxp or win7
View Complete Details

Spectrometers

We are offering spectrometers.Lms-9000alms-9000b is according to lm-79 clause 9.1. It is designed to have a capability of producing any visible spectral distribution, mimicking various light sources in the visible region by feedback control of the radiant power emitted by individual leds. This led test system will be used as a transfer standard for photometric, colorimetric and radiometric applications.Lms-9000b is quick test with high accuracy, it used in scientific lab test. Due to the test speed and lms-9000b can work with lsg-1600blsg-1800blsg-1900lsg-2000 goniophotometer to do the spatial color and spectrum test.Measures:colorimetric: chromaticity coordinates, cct, color ratio, peak wavelength, half bandwidth, dominant wavelength, color purity, cri, spectrum testphotometric: luminous flux, luminous efficiency, radiant power, pupil flux, pupil flux efficiency, pupil factor, cirtopic fluxelectrical: voltage, current, power, power factorspecifications:spectral range wavelength: 380nm800nmspectral wavelength accuracy: 0.5nm, wavelength reproducibility: 0.2nmsample scanning steps: 0.1nmaccuracy of chromaticity coordinate (x, y): 0.003 (lms-9000a) and 0.002 (lms-9000b)correlated color temperature cct: 1, 000k100, 000k, cct accuracy: 0.3%color rendering index range: 0100.0, accuracy: (0.3%rd0.3)photometric linear: 0.5% (lms-9000a) and 0.3% (lms-9000b)stray light:
View Complete Details

Led Driver Tester

We are offering lsled-12 led driver on line tester is according to iec62384:2011 and gbt 24825-2009.the tester includes a group measuring module and b group measuring module. The a group measuring module can test 6pcs led driver ac parameters. The b group measuring module can test 6pcs led driver ac, dc and acdc parameters.there are 12 windows to display the input and output parameters, it is good for comparing and analyses.quick test for all of the parameters in 0.1seconds.it can set up the testing parameters passfail range, it will have noiselight warning if it is fail. We also supply handle port (extra cost)software communicate with pc (extra cost)specification:1) a group measuring module (for ac parameters testing):measuring input voltage, current, power and power factorvoltage and current fundamental frequency: 45hz65hz, response frequency: 45hz1mhzvoltage range: 0.15300v (cf=1.67), current range: 1.5ma2.7a (cf=3), power range: 0.015800w, power factor range: 0.0001.0002) b group measuring module (for ac parameters testing):measuring output voltage, current, power and power factorvoltage range: 0.15300v (cf=1.67), current range: 1.5ma2.7a (cf=3), power range: 0.015800w, power factor range: 0.0001.0003) b group measuring module (for dc parameters testing):measuring lamp voltage, current, power and ripple currentvoltage range: 0.15500v, current range: 1.5ma8a, power range: 0.0154000w, ripple current range: 5ma2.5a
View Complete Details

Surge Generator

We are offering automatic lightning surge generator (or lightning surge immunity) sg61000-5 is used to assess the power cord and connect the internal switch stood in line to connect the internal switch to provide a common basis for switching the natural world and lightning caused by the high-energy transient interference performance. Performance fully meets the iec 61000-4-5, en61000-4-5 and gbt17626.5 standards.Specifications:product model sg61000-5 sg61000-5t sg61000-5hwave generator combination wave combination wave combination wave ccitt(option)output voltage (open) 1.250s20% 1.250s20% 1.250s20% 10700s20%output current (short) 820s20% 820s20% 820s20% 5320s20%output impedance 2 2 2 and 500 40output voltage range 06kv10% 06kv10% 010kv10% 06kv10%output current range 03ka10% 03ka10% 05ka10% 0150ka10%operation mode automaticsurge repetition 19999 times 19999 times 19999 times 19999 timesinterval time 209999s 209999s 209999s 209999spolarity positive, negative or positivenegative automaticphase shift asynchronous, synchronization 0 360 or specific angle nacouplingdecoupling network (cdn) includes a 16a single phase cdn includes a 20a 3phases cdn includes a 20a 3phases cdn built-in 30a 3phases cdnworking power ac220v(option 110v)10%, 5060hzdimensions (wxdxh) 44x45x35cm 44x45x20cm and 44x45x35cm (cdn) 44x45x20cm and 44x45x35cm (cdn) 56x69x157cm (with cabinet)gross weight about 30kg about 48kg about 48kg about 300kgtouch screen with super big lcd and built-in windows ce
View Complete Details

Electrical Safety Tester

We are offering electrical safety tester.The ls9934ls9935 automatic safety test system is according to gb4706.1, iecen60335-1, ul60335, gb7000, iec60598, gb4943, iec60950 and gb9706.1. It used for luminaries, home application and motor tools safety test in production line or lab r&d.Specification:display all setting parameters and testing results in the same big lcd menuit can set the passfail limit value. It will have lightnoisy to warningincludes the handle to do remote operatetest mode programmable; quick discharge, 50 memory groups, 8 steps per groupsupport 50hz and 60hz frequency; electric safety wall detecting featurethe ls9934 can do test for withstand voltage (acw), insulation resistance (ir), leakage current (llc) and ground resistance (gr)the ls9935 can test for withstand voltage (acw), insulation resistance (ir), leakage current (llc), ground resistance (gr) and powerwithstand voltage test (acw) insulation resistance test (ir)voltage range accuracy current range ir range accuracy voltage rangeac1005000v (1.5%+3v) 0.00540.00ma 0.503000m 5%+0.5m dc1001000vleakage current test (llc) grounding resistance test (gr)llc range accuracy voltage range gr range accuracy output current0.00520ma (1.5%+0.005ma) ac5.0300.0v 0600m (1.5%+3m) ac3.0030.00apower testvoltage current power pf accuracy test time03000v 04.5a 21000w 0.21.000 class 0.5 0999.9s
View Complete Details

Esd Tester

We offer esd tester. Esd simulator (electrostatic discharge generator or electrostatic gun) is in full compliance with iec 61000-4-2, en61000-4-2, iso10605, gbt17626.2, gbt17215.301 and gbt17215.322. The esd generator is designed for the assessment of electrical and electronic equipment to withstand esd performance. Esd61000-2esd61000-2a has lcd display in both english and chinese, they equipped with an infrared remote control which can allow you do the test in some special place. Specifications:product model esd61000-2 esd61000-2aoutput voltage 0.120kv5% 0.130kv5%polarity positivenegative positivenegativeenergy storage capacitance 150pf10% (replaceable) 150pf10% (replaceable)discharge resistor 3305% (replaceable) 3305% (replaceable)current rise time 0.61ns 0.61nstesting functions single, count, 20pps, air, contact, iec level single, count, 20pps, air, contact, iec leveltrigger mode manualauto manualautonumbers of discharge 19999 19999repetition 0.05s99.99s 0.05s99.99sworking power ac220v(option 110v)10%, 5060hz ac220v(option 110v)10%, 5060hz touch screen with super big lcd and built-in windows ce
View Complete Details

Battery Testing Service

We are offering battery testing service as per is 1651as per iec: 60896-11a. Verification of constructional requirementa. Capacity testb. Marking & packingb. Charge retention testc. Verification of dimensionc. Endurance in discharge-charge cycled. Ah and watt hr efficiency testd. Endurance in over charge e. Test for suitability for floating battery operation f. Short circuit and internal resistance test
View Complete Details

Household Applience Testing

We are offering household applience testing.Motor operated kitchen appliances, electric irons, floor treatment machines, warming plates, refrigerators, appliances for heating liquids, appliances for skin and hair care, ice makers, hair dryers, vacuum cleaners, heating appliances, air conditioning devices, washing machines, pumps, insect killers, ironers , stoves, humidifiers etc. Testing as per iecen 60335 , is 302
View Complete Details

Bis Testing Services

We can do testing as per is standard of the led driver , luminary , cables , control panel , lab instrument , testing instruments , power supply , information technology equipments , pda , keyboards , junction box , cable tray , electric motor , process control instruments , etc.
View Complete Details

Led Luminaires Testing Services

We are offering led luminaires testing services.Fixed general purpose luminaries, luminaries for road and street lighting, aquarium luminaries, lighting chains, emergency lighting, general safety testing for luminariesmarkingconstructionexternal and internal wiringprovision for earthingprotection against electric c shockresistance to dust, solid objective and moistureinsulation resistance and electric strength.Creepage and clearances distancesendurance and thermal testresistance to heat , fire and trackingscrew terminalsscrewless terminals and electrical connections led-lamps , led bulb , led based street lights , flood lights , tube lights , dc or ac supplied electronic control gear for led modules , indoor-outdoor led luminaires etc popular standards for led product testing are lm 79 , is 16106:2012 , iec 61347-2-13 , iec 62384, iec62722-2-1, iec 62031, is 15885(part2sec13), is 16103, is 16102, iec 62612, iec 60969 etc
View Complete Details

LM 79 Testing For LED Product

We, ITC India, are a leading testing companylaboratory having a NABL (Certificate No. T 1811) accreditation. The Laboratory is following the procedure as required by International Standard IEC 17025 and is already certified for ISO 17025 by NABL and IABCBL.Our lab is totally equipped with following high accuracy testing instruments to provide a total testing solution for LED based productHigh Precision CCD SpectroradiometerDigital Power Meter (RS-232 Model)Digital CC and CV DC Power SupplyIntegrating Sphere (Diameter=2.0M)Standard Light Source (24V50W)LED Power Driver TesterElectrical Safety analyzer and moreWe can do the testing of your LED product against the different standard like LM 79, IS 16106, IEC 60598-1, IEC 61347-2-13, IEC 62384, IEC62722-2-1, IEC 62031, IS 15885(part2sec13), IS 16103, IS 16102, IEC 62612, and IEC 60969 etc Also we can help you to get CE Certification.
View Complete Details

Safety Testing Services

We can do safety testing against below international standard likeiec 61010-1 : lab instrumentsiec 60204-1 : control paneliec 60595 : led luminaryiec 61347 : lamp control geariec 60950 : information technology equipmentsiec 60601 : electromedical equipmetsiec 60065 : audio video & similar productiec 61439 : low voltage switchgear & control gear assembliesiec 60034 : rotating electrical machine and more contact us for more information.
View Complete Details

Ip Testing

We have developed a special testing facility against solid particle protection & liquid ingress protection generally called as the ip testing. We have below test facility at present in our lab;1. Ip 1x, ip 2x, ip 4x for protection of machine against penetration by solid foreign objects2. Ip 5x for dust protection3. Ip 6x for dust protection4. Ip x7, ip x8, ip x5 & ip x6 for protection against ingress of water. also we can offer you lm 79 testing for ssl product.
View Complete Details

Cable Gland Testing Services

We are offering cable gland testing services.Bs 6121: specification for mechanical cable glands for elastomer and plastics insulated cables en 62444: cable glands for electrical installations test carries out under this standard. Cable retension test cable anchorage test cable anchorage twist test impact testtorque test ingress protection (ip) test electrical continuity test insulation resistance test and more
View Complete Details

Emc Testing Services

We focus on the following industries product emcemi testing:industrial electronicsconsumer electronicstelecommunicationsmedicalwe can do the following emc testing on your product.Testas per standardelectrostatic discharge immunity test(esd test)iecen 61000-4-2electrical fast transientburst immunity testiecen 61000-4-4surge immunity testiecen 61000-4-5voltage dips, short interruptions and voltage variations immunity testsiecen 61000-4-11limits for harmonic current emissions (equipment input current 16 a per phase)iecen 61000-3-2limitation of voltage changes, voltage fluctuations and flickeriecen 61000-3-3
View Complete Details

Environmental Testing Services

We are offering environmental testing services as per is 9000 & iec 60068- - dry heat- dry cold- damp heat(steady state)- damp heat(cyclic)- damp heat(composite)- humidity freeze(cyclic)- temperature cycling & more.
View Complete Details

Transformer Testing Services

We are offering transformer testing services.Iecen 61558-1: safety of power transformers, power supply units and similar -- part 1: general iecen 61558-1: safety of power transformers, power supply units and similar -- part 1: general requirements and testssome of the test carried out on transformeras per iec 61558 protection against electric shockprotection against harmful ingressoutput voltage and output currentinsulation resistance, dielectricno-load output voltage construction short-circuit voltage creepage distances, clearancesshort-circuit and overload protection
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us