Isotherm Internationale

Bowenpally, Hyderabad, Telangana

Interchangeable with our handguns or automatic guns, heated hoses from Isotherm are designed to the most exacting engineering and safety standards. All our hot melt hoses are covered by a one-year limited warranty. The core of each hot melt hose is hand-wound using multi-strand nichrome heater wire embedded in 60 mils of silicon, wrapped with insulation, and covered with extra-tough outside braiding. To help ensure high quality, after assembly each hose is individually tested and the heat profile is recorded and maintained. Among their key features: Core diameters of 3/8, 1/2, 5/8 inches & any other size Lengths up to 30 feet Super-Tuff, X-treme fluoropolymer sleeving

Isotherm is one of the leading name engaged in manufacturing and supplying of the Fibreglass Cables that are of the superior quality and can provide efficient performance. These cables are provided by us at an affordable price.

We are one of the leading name engaged in manufacturing and supplying of a wide range of Thermocouples that provides efficient performance. This Thermocouples are extremely efficient in their readings and are consistent in their performance.

Isotherm manufactures and supplies a superior quality and a wide range of the RTD Sensors. This Resistance Thermometer Detector can measure the temperature with accuracy and we provide this RTD at an affordable rate.

We design, develop and supply thisHeated Drum Dolly that is used to heat up a drum that contains non-flammable, non-hazardous materials. We provide this Heated Drum Dolly at an affordable price.

We design, develop and manufacture the superior quality of the Humidifiers. This is efficient in their performance of maintaining the humidity of the air. We provide these Humidifiers at an affordable price.

Isotherm design and develops a superior quality of Commercial Incinerators that is manufactured using quality raw materials. It can be used to dispose of solid waste, trash, drugs, and more. It is reliable and durable.

Industrial Ovens that we manufacture and supply are of the superior quality. It is used in an industrial application like baking, drying, and many other applications. It is provided by us at an affordable price.

Isotherm is one of the leading name engaged in manufacturing and supplying of the motor control center (MCC) that are of the superior quality and can provide efficient performance. These motor control center (MCC) are reliable and durable.

The Insulation is required for environment temp. exceeding 600C. The type of Insulation comes under Hot Insulation. The materials required and generally applied for the Hot Insulation are as under. 1. Unbonded Glass wool with Handmade Mattresses Upto 400 0C. 2. Unbonded Mineral wool with Handmade Mattresses Upto 500 0C. 3. Lightly Resin Bonded (LRB) Rockwool Mattresses with Wirenetting Upto 550 0C 4. Calcium Silicate Powder / Slabs: Upto 800 0C 5. Ceramic Fiber Blankets: Upto 1000 0C.

The Insulation is required for environment temp. below ambient The type of Insulation comes under Cold Insulation. The materials required and generally applied for the Cold Insulation are as under: 1.Thermocole: Both in ND and TF quality Upto -20 0C. 2.Polyurethane Foam: Upto – 200 0C. The Insulation can also be done by machine, providing cavity of the required thickness and dispensing the PU Chemicals in defined proportion through dispensing machine where the isothermal reaction takes place and foam is formed. The job can be done at site and the process is called as Pouring In-Situ. 3.Phenolic Foam: Upto – 180 0C. 4.Nitrile Rubber: Upto – 200 0C. It will be interesting to note that the above material can be applied in Block and Pipe Sections by Manual Application process

Isotherm Underfloor Heating Mats systems utilize our insulated, twisted dual core heating element, protected by an armor braid and our advanced tough heat-resistant fluoropolymer outer jacket. All ISOTHERM cables have a high IP rating of 67 which is suitable for use in wet areas and in conjunction with wet room systems. The heating element is attached to a fiberglass mesh for rapid and superior installation without any need for priming on a clean dust free floor, ensuring zero lift in self-leveling compounds and peace of mind, no messing around with the peeling of double-sided tapes. ISOTHERM heating mats come with only one power lead wire making it easy to install without raising the floor level. Technical Specifications Operating voltage: 220-240V; 50Hz/Other voltages can be designed as per customer requirements. Mat width: 500mm (0.5 metre) Mat thickness: 3mm Inner insulation: PTFE Outer insulation: Advanced fluoropolymer Earth Protection: Armour braid IP Rating: 67 Output rating: 100W/sqm, 160 W/sqm and 200W/sqm Cold tail length: (connection lead) 3m

Our flexible ceramic pad heaters, or FCP's, are manufactured using high-grade nickel chrome (NiCr) 80/20 19 strand wire and insulated using ceramic yarn, giving flexibility and increased high heat transfer capability.The choice of either camlock or Dinse type connector is used to terminate each tail. Designed for high-temperature applications up to 800 Deg C, our range of ceramic pad heaters will function efficiently whether they are used as a curved or flat application, and are available in an extensive list of sizes with voltages ranging from 30 volts to 255 volts. Most standard sizes are available to order, however, non-standard sizes can be manufactured to your requirements quickly, and, should you require any special heating configuration, voltage or power rating, we can provide you with a heating element custom built to meet your exact needs