Our Products
Earthmoving Machines
2 Products availableHydraulic Cutting Machine
1 Products availablePodium
1 Products availableWe offer the best product range of MULTI - FUNCTIONAL TELESCOPIC WHEEL LODERS, Oil Squeezing Press, Automatic Single Station Coir Pith Press, auto plate shifter and C Frame Hydraulic Presses.
High-performance:
Mini skid steer loader can enter into small spaces for working, even your indoor room.
Easier Maintenance:
Open style design, upper cover and back guard plate can be easily opened and dismounted, you also can easily discharge the wasted engine oil outside the body; all of these can make you replace the spare parts easily, like air filter, engine oil, oil filter, spark plug and so on.
Easy Control:
Only two control handles control running, lifting and dumping. Piston hydraulic motors provide mini skid steers with a larger torque and make smooth running. Four-wheel drive enables mini skid steers to walk in a variety of terrain.
Features:
Makes fastening attachments quick and easy
Balance weight platform optional
Global famous brand engine
Diesel engine and electric configuration optional
Higher lighting height
Hydraulic joystick control optional
Model |
360 - With Tyre |
369 - With Rubber Track |
Max working height |
2143 mm |
2065 mm |
Max pin height |
1884 mm |
1803 mm |
Max dumping height |
1488 mm |
1386 mm |
Max dumping distance |
348 mm |
471 mm |
Max dumping Angle |
30 |
32 |
Rollback of bucket on ground |
25 |
33 |
Departure angle |
11 |
18 |
Total height |
1233 mm |
1309 mm |
Ground clearance |
118 mm |
123 mm |
Wheel base |
636 mm |
690 mm |
Overall length without bucket |
1752 mm |
1778 mm |
Total width |
1160 mm |
800 mm |
Bucket width |
980 mm |
820 mm |
Total length with bucket |
2206 mm |
2210 mm |
Turn radius forward turning |
1307 mm |
1237 mm |
Engine |
||
Rated power |
23 HP |
23 HP |
Rotating Speed |
3600 rpm |
3600 rpm |
Noise |
<95 Dp |
<95 Dp |
Hydraulic system |
||
Pressure |
17 Mpa |
17 Mpa |
Working Time |
||
Raise |
4.27 |
4.27 |
Dump |
1.34 |
1.34 |
Lower |
3.31 |
3.31 |
Operating Load |
200 Kg |
165 Kg |
Bucket Capacity |
0.15 m3 |
0.15 m3 |
Max Lifting Force |
375 Kg |
375 Kg |
Travel Speed |
0-5.5 Km/h |
0-5.5 Km/h |
Operated weight |
890 Kg |
855 Kg |
Features:
Fully hydraulic steering system, power shift transmission, easier operation
Bucket can be leveled automatically, optimized working device, higher productivity
New design cabin, comfortable operation environment
Option attachment: Wooden fork, pipe clamp, grass fork, rock bucket, snow bucket, pallet fork etc.
Model No |
ISHA918 |
ISHA956 |
ISHA938 |
ISHA930 |
ISHA926 |
Rated power/speed |
37/2400kw/rpm |
162/2200 rpm |
92/2400 rpm |
65/2400 rpm |
65/2400 rpm |
Rated bucket capacity |
0.6/0.7 m3 |
3.0 m3 |
1.7 m3 |
1.3 m3 |
1.0 m3 |
Rated Load |
1400 Kg |
5000 Kg |
3000 Kg |
2800 Kg |
2000 Kg |
L x W x H |
4800 x 1600 x 2600 mm |
7934 x 3060 x 3483 mm |
7050 x 2430 x 3120 mm |
5800 x 1960 x 2810 mm |
5700 x 1860 x 2730 mm |
Wheel base |
2000 mm |
3200 mm |
2650 mm |
2580 mm |
2250 mm |
Wheel tread |
1350 mm |
2250 mm |
1850 mm |
1620 mm |
2320 mm |
Max. breakout force |
37 KN |
172.3 KN |
138 KN |
48.87 KN |
48.87 KN |
Max. dump height |
2850 mm |
3098 mm |
3020/3250 mm |
3300 mm |
3200 mm |
Dump distance |
1030 mm |
1198 mm |
1200 mm |
885 mm |
885 mm |
Total time |
13 s |
11.48 s |
11 s |
11.3 s |
11.3 s |
Operating weight |
3000 Kg |
18000 Kg |
9500 Kg |
5100 Kg |
4350 Kg |
Tyre |
20.5-16 (16/90-16) |
23.5-25 |
17.5-25 |
16/17-20 |
DY series loaders offers best solution for narrow space works and front articulated design makes the
turning radius smaller which also helps a lot. Telescopic boom offers wider usage.
Features:
1. Unique telescopic design, widely increase its working scope and usage, and also this new design
bring something fresh to the loader business, big advantage for re-sell also.
2. Quick hitch with many kinds of attachments enable the loader can do different kind of work in
many areas. You can find all what you need here in our factory.
3. Many other options meet any of your requirements to make the ideal machine you want.
4. Another big advantage compared with other normal loaders, our can be equipped with rear
hydraulic output & 3 point hitch, which makes it can turn into a tractor. So spending money once
for a loader and you can get both loader and tractor.
5. Joy stick controlling makes the operating easy and convenient.
6. The self-levering which will keep the bucket parallel always with the floor when raising andlowering bucket.
Revolving platformParticularlysuitablewhen impossible or extremely difficult manoeuvres.This system is suitablefor reduced spaces where installing a turnable platform is not viable.
Advantages:
Avoids manoeuvres when turning on a slope.
Provide access to other storeys otherwise impossible
Installed with asimple civil work.
Easy to operate withthe (included) remote control.
Anti-crushing"Safe Person" patented system.
No maintenancerequested
Shifts automatically to manual in case of power failure.
Either ground or abovelevel installation
General features:
Inclination: Maximum 12%
Structure: Structural ST-42 tubes.
Floor: Nonslip metal sheet.
Bearings: Life-long lubrication.
Rotation: Either directions.
Support: 16 periphericals and 1 central.
Transmission: By friction with dragginglimiter.
Control panel: Included.
Remote Control: Included.
Safety: Anti-crushing Safe Person patentedsystem.
Moveable revolvingPlatform to turn trucks inside tunnels and to use at civil work. Load 50 Tones
INSTALLEDON THE FLOOR
No civil work required
Assembly time 6 hours
Height, only 11cm
Power 180 watts
Anti crushing system Patented
A Scissor trolley lift provides a convenient and fast way to transport trolleys, goods, barrels, refuse and general bulky items without manual handling, and can be sized according to your trolley dimensions with entrance points generally situated at floor level. Scissor Trolley Lifts are ideal for manufacturing, office, healthcare, childcare and educational environments.
Features and Options:
Safety bellows
Very compact design
Foot pump / hand pump provided
Used at any intermittent height
Limit switch for auto shut off
Hose burst valve provided at the cylinder end
Hydraulic pump with built in overload relief
Platform surface is made up of anti-skid checkered steel plate
Mechanical lock
Manual emergency lowering system
Pendant box
Caster wheels with lock / nylon wheels with lock
The multidock loading bay lift requires no pit to be dug and can be used within minutes of delivery. Complete with a low gradient ramp, a single person can load a truck easily as it accommodates two large roll cages.
Where in area is a busy and often congested space with constant goods movement. The PitfreeISHATruck loader can be operational within 15 minutes of arriving on site and absolutely no ground works are required. This is a massive advantage over traditional loading bay lifts, which require extensive pit works that limit the use of the area for many days.
It can be used as a free standing lift in an open yard or in front of an existing fixed height dock. Roll cages can be wheeled directly from the rear of any vehicle and then raised or lowered to the off load height. The lowered height of the Pitfree MultiDock is just 900mm.
Truck Tippler Loading and Unloading system is a materials handling device used for projects needing, loading or unloading of Limestone, Coal, Silica, Sugarcane, Reversand etc. The Truck Tippler Loading and Unloading system is erected permanently and optional mobile type along the hopper or carrier. Loaded truck is brought on to Tippler platform first. Then, truck is hydraulically hooked to front wheels. Rear Stopper of the truck tippler supports trucks rear wheels hydraulically. It is then tilted hydraulically to max angle of nearly 55 degree. The materials slide down to hopper or carrier. The complete cycle takes nearly 4-5 minutes.
OurTruck Tipplersystem is designed according to the specific requirement of our clients and is made using high quality raw materials offered at very reasonable prices. Single point loading and unloading of trucks, containers and trailers of capacities of 30 to 100 tons can be made possible with a tilting angle of nearly 55 degree. It can be also used as a Fast and Safe way to unload granular material from trucks to the ground hopper. We manufacture the Truck Tippler Loading and Unloading system as per the prescribed standardized norms and they are highly efficient, reliable, safe, and demanded across the world.
CAPACITY | 40 Ton | 50 Ton | 50 Ton (SP) | 60 Ton | 70 Ton | 70 Ton | 100 Ton |
PLATFORM SIZE | 8480 X 3200 | 8550 X 3200 | 13300 X 3200 | 8550 X3200 | 8600 X3200 | 13300 X 3200 | 16150X 3200 |
PUMP CAPACITY | 43 LPM | 43 LPM | 54 LPM | 54 LPM | 54 LPM | 54 LPM | 100/30LPM |
TANK CAPACITY | 200 LTR | 200 LTR | 300 LTR | 200 LTR | 200 LTR | 400 LTR | 600LTR |
MOTOR RATING (H.P) | 20 @ 1440RPM | 25 @ 1440RPM | 25 @ 1440RPM | 30 @ 1440RPM | 30 @ 1440RPM | 30 @ 1440RPM | 40 @ 1440RPM |
OPERATING BAR PRESSURE | 175 BAR | 175 BAR | 155 BAR | 175 BAR | 175 BAR | 190 BAR | 140 BAR |
LIFTING CYLINDERS | 2 NOS. | 2 NOS. | 2 NOS. | 2 NOS. | 2 NOS. | 2 NOS. | 2 NOS. |
BACK STOPPER CYLINDERS | 2 NOS. | 2 NOS. | 2 NOS. | 2 NOS. | 2 NOS. | 2 NOS. | 2 NOS. |
HOOKING CYLINDERS | 2 NOS. | 2 NOS. | 2 NOS.with extra lock for Truck Chassis |
2 NOS. | 2 NOS. | 2 NOS.with extra lock for Truck Chassis. |
Salient Features:
Its platform is welded using robotic arm and lip in almond anti-slip steel
Single effect lift cylinder, double effect lip cylinder
Security stop in case of unintentional departure of the vehicle. Maximum pressure valve
Numerous sizes of rubber cushions offered
Adjacent foot guard steel guards
Tilt permits Dock Leveler to recompense for canted situation
Maintenance prop to support Dock Leveler during maintenance checks
Capacity | 9,000 Kgs | 10,000 Kgs | 12,000 Kgs | 15,000Kgs |
Length | 2500 mm | 2750 mm | 2500 mm | 2750 mm |
Width | 2000 mm | 2000 mm | 2000 mm | 2000 mm |
Travel Upward | 300 mm | 450 mm | 300 mm | 450 mm |
Travel Downward | 300 mm | 200 mm | 300 mm | 200 mm |
Power | 2 HP | 2 HP | 2 HP | 2 HP |
One of the main uses for a horizontal baling and bagging machine is the baling of loose materials. Truthfully, when you have waste like sawdust, wood chips, rags, peanut shells, rice hulls, cotton seeds and similar, disposing of / recycling these materials is difficult. A horizontal bagging machine makes sense, because it can automatically feed, bale, compact, and bag these materials for easy storage / transport / recycling. Some facilities even resell the bagged waste materials.
Bale Size (L x W x H) |
Bale Weight (depends on material) |
Throughput |
Strapping |
850 x 480 x 370 mm |
35-40 kg |
40 bales /hr |
Plastic bag, woven bag, etc. |
700 x 400 x 300 mm |
35-40 kg |
40 bales /hr |
|
700 x 400 x 300 mm |
25-30 kg |
40 bales /hr |
|
700 x 400 x 300 mm |
20-25 kg |
150 bales /hr |
|
700 x 400 x 300 mm |
20-25 kg |
40 bales /hr |
Features:
Suitable for industrial turnings, fillings, chips, clippings and
metallic dust into dense.
Briquettes can be directly introduced into the melting furnace
Reduces transportation costs
Recovers valuable cutting fluids
Reduces material handling costs
Minimizes hazardous liability exposure
Minimizes floor space allocated to scrap storage
Applicable for Aluminium, Cast iron, Steel, Copper, Brass,
Titanium, Magnesium.
Our range of quality products also comprise ofOil Squeezing Press.
Features:
Easy operate
Safe and reliable
High oil output
Can use different raw material.
We offer Fully Automatic Filter Press, which is manufactured using premium raw materials and with the technological expertise of qualified professionals. Loaded with various features that enhance its performance, our Fully Automatic Filter Press is designed to be an excellent addition to your production line. Optional Features : PLC for feed pump and equipmentElectric light curtain for safety operationAutomatic plate shifter and vibratorAuto trip tray and conveyorAuto cloth washingAir and Core Blow