ISCON SURGICALS LTD

Jodhpur, Rajasthan

we are leading supplier of this product.

• Thin Wall S.S Tubing
• Perfect Match bevel of Cannula and Stylet quincke point
• Transparent Hub and ETO sterile
• Adaptor as per International color specification
• Also available with graduations
• Individually protected needle guards
• Box of 10

we are leading supplier of this product.

we are leading supplier of this product.

we are leading supplier of this product.

This needle consists of five parts:

• 11G Outer Needle
• 13G Inner Needle
• Stylet fitted with above matched point
• Adjustable Needle Stop
• Inner 13G Needle with hook shape for sample collection

Cannula Reusable & DisposableHandcrafted precisely made instruments both in Stainless Steel & TitaniumBlades, Knives, Trephines I n wide varieties, Phaco AccessoriesArtificial Eyes, Mules, Conformers, etc.Diagnostic Strips Our R&D Centre is the cure of an ongoing research programme in consultation with globally renowned Surgeons. We welcome your new product ideas & designs an improvement to our current lines and simplify the surgical procedure.We offer complete range of SICS & MICS Surgical Kits.

Sterile syringe with needle intended for injection of vaccines fitted with a mechanism to prevent re-use.

The syringes after the intended use is locked at the lower end of the barrel (near the nozzle) and if anybody tries to pull the piston back for re-use purpose the piston gets damaged and cannot be used for the second time.

ETO Sterile, Non-Pyrogenic, Non-Toxic.

Three piece needle, 17G Guide Cannula with bulbows tip 5" long. 20G x 6" short bevel needles with matched stylet point. The Cannula extend appx. 5/8" out of Guide Cannula. Bulbows tip prevents traxma during injection.

The Needles have large spool female luer hub and 40 very short bevel with edgesrounded thoroughly. 19G can be used for single shot epidural anesthesia.The18G TW can be used with vinyl tubing for continuous epidural anesthesia.

Castroveijo Corneal Scissors, Large Blades 60-529- Curved on Flat- Large Blades- Dull Finish- Flat Handle - Overall length 115mm

Animal Feeding Needles are designed to ensure feeding and dosing without injuryto sensitive tissue of the animal. The standard sizes in the four styles listed are the mostpopular in use by Pharamaceutical Laboratories, Hospital, Pathologists and other Bio-medicalResearchers working with Laboratory animals. Other than these and to enable researcher toshape the needles to his specific needs MALLEABLE NEEDLES in straight are also offered.These can be easily bent as per the requirement of an individual.

This consist of five parts

Thin wall needle with sharp edge bevel point.

• Sharp point tracar for initial skin piercing.
• Curved Pin (Biopsy stop) to eliminate less of handling and prevent speciment damage.
• Fitted stylet for Cleaning the cannula.
• Adjustable Needle stop to praide controlled depth penetration.

Syringes are manufactured from high quality raw material and assembled on fully automatic assembly machines in Class 10000 Clean rooms.

Features:

• Specification : ISO 7886-84.
• Size : 1ml, 2ml, 3ml, 5ml, 10ml, 20ml, 30ml, 50ml.
• Types : 2 Part / 3 Part.
• Nozzle Types : LuerSlip, Luer Lock.
• Tip : Central Tip / Eccentric Tip.
• Packing : By Packed Needle, Blister Packing, Mounted Needle, Ribbon Packing.
• ETO Sterile, Non-Pyrogenic, Non-Toxic.

Features:

Bendable shaft for versatility and ease of use.

14 Gauge OD2.1mm Green

16 Gauge OD1.6mm White

18 Gauge OD1.2mm Pink

20 Gauge OD0.9mm Yellow

22 Gauge OD0.7mm Black

This needle is available with either sharp 15obevel point or a blunt end. It is designed for use with 1/2" I.D. Rubber of Plastic tubing.

The two piece needle set consists of sharp pointed stainless steel outer cannula and stainless steel blunt fitted obtruator, which protrudes 1/8" beyond needle point. This needle provides a simple procedure to obtain and implant tumors tissue cells beneath the skin of laboratory animal for observation.

This two piece needle set has a blunt outer Cannula chamfered on the inside to form a sharp cutting edge and a closely matched fitted blunt stylet. When firmly pressed into the media a small size sample is easily cut and can be transferred to another site. The sample can be delivered by inserting the fitted obturator (stylet), permitting the maintence of sterile field.

75-700 Poly Carbonate Tray with Mat SlotSize : 6" x 2.5" x 0.75" 75-702 Poly Carbonate Tray with Mat SlotSize : 7.5" x 4" x 0.75" 75-704 Poly Carbonate Tray with Mat SlotSize : 10" x 6" x 0.75" 75-706 Poly Carbonate Tray with Mat SlotSize : 10" x 6" x 2.25" 75-708 S.S. Tray with MatSize : 10" x 6" x 0.75" 75-709 S.S. Tray with MatSize : 7.5" x 6" x 0.75"

Design & Tool Room. All the components for Syringes, AD Syringes, Needles, Specialty Needles, Luer Locks are moulded in-house on state of art Moulding Machines. Most of the Specialty Needles involves insert moulding for which high capacity high speed machines have been installed.

The Company is equipped with variety of machining operations like Grinding, Bending, Flaring, Swaging, Coiling, Slitting, Micro drilling, Etch-Marking, Blasting, and low temperature Silver Brazing.
The Company offers Stainless Steel cut blanks burr free and square in very close tolerance on wire cut machine. In house facility of Passivation, Electro polishing, Electroplating, Heat treatment Ultra Sonic Cleaning and Siliconising etc. are also added advantages. We manufacture Custom Needle and Needle Assemblies with Plastic and Metal Hubs, Cannulae for different applications, Solid Wire Needles, Stylets, Blades, Probes, Miniature needles etc.
Complementing our OEM and custom fabrication services, we offer a wide range of Luer Connectors, Adaptors, Extension Tubings, Stainless Steel Handles etc. We are committed to maintaining high quality and offering turnkey solutions from concept to manufacturing. Few of the offered OEM includes:

Fully Automatic PLCCNC controlled special point grinding machines integrated with micro glass bead blasting ensures consistent and high quality of Needle bevel. Ev en the Trephine (Biopsy Punch) grinding machine is CNC controlled with auto loading system.

Micro Emulsifying Needle is widly used for mixing of oil based liquids or any two liquid media differing in viscosity. By locking two syringes on to the double hub needle or double hub adapter, two liquids such as a mineral oil and an emulsifying agent may be readily pumped between the two syringes to produce a uniform mixture.

Keeping place with the myraids of increasing Clinical & Laboratory demand our Engineers continue to make innovative additions, with your support.
Pipetting Needles are available in wide range for use in Laboratory procedures. Needles are also offered in STAINLESS STEEL (SS-304) HUBS for special applications with corrosive material or critical procedures