Introduction : BENADRILL^® is a trademark registered high performance bentonite which is designed as per API Specifications 13A to meet oil well drilling, hydraulic-barrier applications (pond-sealing, slurry trenching, caissons, etc.) & civil engineering applications. BENADRILL^® is high swelling & sodium based activated bentonite.

Application / Usages:

• Drilling Muds
• Boring & Piling
• Pipe Jacking
• Grouting
• Fluid Reducing

Features of BENADRILL^®

• High Swelling Bentonite
• High Water Absorption
• Low Filtrate Loss
• Fantastic Gelling Strength
• Enlarged Surface Area
• Impermeability
• Lubrication & Low Compressibility

Advantages

• Advance lubrication ability
• Fast development of rheological properties (Hydration)
• Can be use under high pressure & high temperature drilling conditions
• Creation of thin filtrate cake with low permeability
• High cutting suspension capability

Specifications: Detail Specs Will Be Given In Pds And Will Be Provided Only On Request Through E-Mail.

BENA-GCL is selectively mined and processed high quality sodium based bentonite powder to ensure a low permeability containment product ideally suited to applications of landfi-ll containment.BENA-GCL is chemically modified bentonite powder which will generally give higher swell index values and lower fluid loss numbers when added with polymers.

Generally the calcium content must be kept to minimal levels as calcium montmorillonite has a much lower swelling potential than sodium montmorillonite.

BENA-GCL does not contain any Fermentable Product and is Environmentally Acceptable.

IMPORTANT CHARACTERISTICS & ADVANTAGES OF “BENA-GCL” 

• High Swelling Index
• Lower Fluid Loss
• Very high active surface area

RECOMMENDED TREATMENT

GCLs consist of a thin bentonite clay layer, which typically ranges from 5–10 mm, encased with geotextile. There are two configurations commonly used; in the first configuration, a layer of bentonite is encased between woven and non-woven geotextiles, which are needle-punched together; the second configuration is fabricated using a flexible membrane liner laminated to one side of the first type. Typical Bentonite mass per unit area using ASTM D5993 Standard is about 4 to 4.40 kg/m2 for reconstituted GCL. 

Introduction : BENASULF^® is trademark registered, high performance sodium based activated bentonite which is designed to meet requirements of Fertilizer Industry. The effective ingredient of BENASULF^® is an aluminum-hydro-silicate clay mineral (montmorillonite). BENASULF^® is used as Sulphur Pellets Binding & Dispersing Agent for all kind of Micro nutrients as well. BENASULF^® is designed for fast hydration & its high swelling capabilities make it most suitable for fertilizer industry.

IMPORTANT CHARACTERISTICS & KEY ADVANTAGES OF “BENASULF^®”

• Fast Absorption & Dispersion Capabilities: It keeps grains / pellets dry & free flowing. Helps in uniform suspension of active ingredients. It keeps ingredients intact due to high absorption characteristic & helps in uniform release into soil.
• High Swelling & Thixotropic: Due to high swelling properties with controlled mesh release of Sulphur in soil is much better.
• High Sheer, Bonding & Comprehensive Strength: Pallets resists to powdering while multiple handling.
• Excellent Gelling Strength: This makes pallets smooth, hard & bright in appearance.
• High Water Absorption: Absorbs nutrients very well & gives excellent bonding properties.
• Excellent Dry Strength: Provides pellets uniform shape and strength.

Excellent Plasticity & Lubricity

Specifications : Specs Will Be Given In PDS And Will Be Provided Only On Request Through E-Mail.

BENAGEL® HIGH is an easy mixing, high viscosity 200 bbl yield freshwater drilling fluid produced from the highest grade sodium bentonite. BENAGEL® HIGH has a Higher Performance formula that makes it very effective. This premium grade beneficiated Bentonite is designed for use in mineral exploration, water well and directional drilling operations. BENGEL® HIGH is an efficient viscosifier that performs well in a variety of water qualities and successfully reduces application rates, mixes easily and quickly. BENAGEL® HIGH does not contain any fermentable product and is environmentally acceptable.

APPLICATION :

• Pilling & Boring
• Diaphragm Cut off Wall
• Slurry Coating In Tunneling
• Horizontal Directional Drilling
• Pipe Jacking
• Drilling Muds

IMPORTANT CHARACTERISTICS & ADVANTAGES OF “BENAGEL® HIGH” :

• 220 to 235 barrel yield
• Mixes rapidly for fast hydration
• Carries cuttings in mud with lower solids content
• Enhances fluid loss characteristics; reduces seeping into permeable formations
• Cools and lubricates bit
• Highly concentrated for maximum yield
• Excellent Plasticity & Viscosity
• Low Filtrate Loss
• Enlarged Surface Area
• Advance Lubrication
• Assists in bore hole stabilization
• Helps eliminate loss circulation conditions

SPECIFICATIONS : 

• Detail Specs Will Be Given In PDS And Will Be Provided Only On Request Through E-Mail.

RECOMMENDED TREATMENT :

Mixing ratios are based on 200 bbl yield material using freshwater. Level of water purity will affect bentonite performance. Prior to mixing, acidic and hard water should be treated with soda ash to a pH of 8.5-9.5. For best results, add BENAGEL® HIGH slowly through a jet/hopper mixer.

BENGEL HIGH mixing ratios in pounds per 100 gallons of water

Normal Conditions  15-25 lbs

Sand and Gravel    25-35 lbs

Fluid Loss Control  34-40 lbs

Introduction : BENAFEED^® Natural bentonite designed to meet the requirements of adsorbent industries like Cattle Feed & Poultry Feed Applications. The effective ingredient of BENAFEED^® is an aluminium-hydro-silicate clay mineral (montmorillonite). BENAFEED^® is used as additive & binding agent in Cattle and Poultry Feeds along with other micro nutrients. BENAFEED^® is widely used in the animal feed Industries both in granular and powder form. Because of its purity and fast hydration & swelling capacity. BENAFEED^® has excellent mycotoxin absorption capacity which is irreversible process. BENAFEED^® is specially designed to meet the requirements of animal feed industries as per International Specifications.

IMPORTANT CHARACTERISTICS & ADVANTAGES OF “BENAFEED^®”

• Large Surface Area
• High Swelling & Thixotropic Properties
• Fast Absorption & Dispersion Capabilities: It has the ability to absorb Mycotoxins & this keeps ingredients intact due to adsorption characteristics.
• High Shear, High Bonding & Compressive Strength: Improve Pallet quality and durability
• High Water Absorption: Quick development of Bonding properties
• Excellent Gel Strength Properties: Forms smooth & hard pallets.
• Good Dry Strength

Specifications : Specs Will Be Given In PDS And Will Be Provided Only On Request Through E-Mail.

Introduction: BENAEARTH^® is high performance sodium based bentonite which is designed to cater requirements of Earthing Application. BENAEARTH^® can be easily used in areas with high soil resistivity, as a ground enhancement material, improves moisture retention of the soil, and this improves grounding effectiveness for Electrical Earthing.

Important Characteristics & Advantages of “BENAEARTH^®”

• High Water Absorption Capabilities & Large Surface Area: Its high water absorption capability keeps water retention in soil & can maintain moisture for long duration & no need to recharge.
• Nontoxic, Non-Inflammable & Environmental Friendly: Its nontoxic properties does not harm human body or animals & hence it is very environmental friendly.
• No corrosion of earthing conductors (electrodes)
• Low Resistivity: It is ideal for electron earthing of rock ground or even this can be easily used in desert areas.
• Low setup & maintenance cost .

Specifications : Specs Will Be Given In PDS And Will Be Provided Only On Request Through E-Mail.

BENAFLOC®-HIGH is specially designed for paper industry as retention systems &contaminant control additive. The effective ingredient of BENAFLOC®-HIGH is an aluminium-hydro-silicate clay mineral (montmorillonite). BENAFLOC®-HIGH is having high ion-exchange-capacity and extremely high active surface area in aqueous dispersions. These unique properties of the material makes BENAFLOC®-HIGH the most suitable product for adsorption, flocculation and dewatering applications. BENAFLOC®-HIGH is mined and processed in North West part of India. BENAFLOC®-HIGH contains more than 70 % active montmorillonite clay content and specially designed to meet the requirements of Paper industries as per International Specifications. BENAFLOC®-HIGH does not contain any fermentable product and is environmentally acceptable.

IMPORTANT CHARACTERISTICS & ADVANTAGES OF “BENAFLOC® HIGH” 

• High levels of retention of fines due to its high specific surface
• The reduction of contaminant levels in the water
• Reduction of deposits in paper machines
• Reduction of sheet holes and staining
• Reduction in frequency of machine downtimes
• Improvement of production quality
• Improvement in wastewater solids and COD
• Micronized / ultrafine product
• Very good adsorption properties for tacky substances
• Significant reduction of pitch, microstickies and potential stickies
• Very high active surface area
• Good flocculation properties
• Increases runnability of the paper machine

Introduction : BENAPEN^® is trademark registered, specially designed bentonite for pencil industry as lead binder. The effective ingredient of BENAPEN^® is an aluminium-hydro-silicate clay mineral (montmorillonite). BENAPEN^® is having good binding property, which makes this material the most suitable product for pencil manufacturing.

Important Characteristics & Advantages of “BENAPEN^®”

• High Water Absorption
• Large Surface Area
• Fast Bond Development : Quick Binding Properties
• High Shear & Compressive Strength: Provides shape and strength to pencil leads.
• Excellent Thermal Stability : High pencil lead quality and low clay usage
• Best Green Strength, Gel strength and Dry strength Properties: Minimum rejections in process.

Specifications : Specs Will Be Given In PDS And Will Be Provided Only On Request Through E-Mail.

INTRODUCTION:

• BARITE is a mineral composed of barium sulphate, BaSO4.
• It is usually colourless or milky white, but can be almost any colour, depending on the impurities trapped in the crystals during their Formation.
• It is unusually heavy for a non-metallic mineral.
• It’s high density is responsible for its value in many applications such as Drilling, Paint & Rubber.
• BARITES is chemically inert and insoluble.
• BARITES (BaSO4) is the most common mineral of Barium.
• Name BARITES was named from the Greek word ‘baros’ which means weighty, a reference to its unusually high specific gravity.

IMPORTANT CHARACTERISTICS & KEY USES OF BARITES
Drilling Application: High Density & Specific GravityofDrilling Grade Grey Barite is used in Oil & Gas Drilling industries as a drilling mud in both onshore and offshore. India is the largest supplier of good quality Barite for Drilling.

Paint Applications: High Specific Gravity Grade Barites is used in paint industry where whiteness is not of importance. This product is highly cost efficient and will suit in paint manufacturing applications where its high specific gravity of 4.3 - 4.4 and purity of 96% will give competitive advantage.

Adhesives and Rubber: High Specific Gravity Grade Barites is used in Rubber and Adhesive industry as Inert and color-neutral density enhancer in noise and vibration reduction systems. Extension levels up to 80% can be achieved. Excellent for use in adhesives, mastic compounds, epoxy resin sizing pastes, unsaturated polyester and polyurethane systems, and also in glazes and impregnation agents, grinding pastes, lubricants and separating agent. In an adhesive or sealant formulation, barium sulfate is an excellent filler choice in specialized applications where X-ray absorbance or chemical resistance is a necessity.

White Paint Applications: Iris Impex is also active in the field of mining & processing White Barites. Barite occurs naturally in white colour in small quantities but commands a high premium in the white paint market.

SPECIFICATIONS : Specs Will Be Given In PDS And Will Be Provided Only On Request Through E-Mail.

Introduction: BENAPELL^® is trademark registered, selectively mined and processed high swelling sodium based bentonite suitable for iron ore pelletizing plants. BENAPELL^® is used as green and dry ore binder for all kind of pellets. BENAPELL^® offers superior performance as per ASTM Specifications.

Important Characteristics & Advantages of “BENAPELL^®”

• Fast Bond Development
• High Water Absorption Properties
• High Swelling & Bonding
• High Shear & Compressive Strength: Benapell provides shape and strength to pellets
• Best Green Strength, Gel Strength & Dry Strength Properties: Minimum Rejections in process.
• Excellent Thermal Stability: High pelletizing quality and low clay usage
• Large Surface Area

Specifications: Specs Will Be Given In PDS And Will Be Provided Only On Request Through E-Mail.

Introduction : BENAFFIX^® is trademark registered, selectively mined and processed high swelling sodium based bentonite with High Thermal Stability. BENAFFIX^® is sodium activated bentonite designed to meet the requirements of modern foundry set up especially high pressure moulding lines (Flask / Flaskless) and deep drawn castings. Use of BENAFFIX^® imparts Low Specific Burnout Ratio in mouldings sand due to its High Purity & Thermal Durability than Conventional Bentonite.

Important Characteristics & Advantages of “BENAFFIX^®”

• Fast Bond Development: High milling efficiency and increased sand throughput
• Wide Moisture Tolerance: Flexible sand control and consistent quality
• Exceptional Mould Ability: Excellent mould integrity and high casting definition
• High Swelling & Wet Tensile: Exceptional resistance to expansion and hot sand defects
• Excellent Thermal Stability: High casting quality due to low dead clay
• Reduced Consumption of Bentonite
• Increased Dimensional Accuracy with Controlled Weight of Castings

Specifications: Specs Will Be Given In PDS And Will Be Provided Only On Request Through E-Mail.

Introduction: BENAGEL^® is a trademark registered, high performance bentonite which gives better performance than API / OCMA Specifications. BENAGEL^® is a sodium based activated bentonite specially designed for civil engineering applications.

Applications / Usages :

• Production of Geosynthetic Clay Liners
• Soil Sealing, Sealant, Sanitary Pit Fills
• Diaphragm Cut off Wall
• Slurry Coating In Tunnelling
• Pipe Jacking
• Horizontal Directional Drilling
• Drilling Muds
• Cement Slurries

Features of BENAGEL^®

• High Swelling Bentonite
• High Water Absorption
• Low Filtrate Loss
• Fantastic Gelling Strength
• Enlarged Surface Area
• Low Permeability
• Advance Lubrication

Specifications: Specs Will Be Given In PDS And Will Be Provided Only On Request Through E-Mail.

INTRODUCTION:

• The Lamellarity, Whiteness and Purity of the Iris Impex talc are the key factors which gives us a competitive edge over the other options available in the global market.
• Compacted talc products are processed by using the state-of-art technology for Ultra Fine talc grades to optimize their reinforcement characteristics which is very helpful in enhancing the bulk density.
• Our in-house processing technology takes utmost care of the particle shape and the high aspect ratio.
• Our manufacturing and processing results are an excellent source of fulfilling the growing needs of the ceramic, cosmetic, paper, paint, rubber and plastic industries globally.

We manufacture and Exports Talc / Soapstone powder of various grades in customized packing.

VARIOUS FEATURES & APPLICATIONS OF "IRIS TALC"
Ceramics Application:

• Used in combination with feldspar, talc brings magnesium oxide to the ceramic flux which:
• Lowers fusion temperature
• Speeds up the vitrification process
• Improves composition viscosity
• Increases surface tension
• Stabilizes thermal expansion – important for large format tiles.

Cosmetic Application:

With its soft, silky feel our cosmetic grade talc makes an excellent base for body and baby powders. Applied after bathing, it prevents chafing and gives a soft, soothing, cool sensation. Our cosmetic grade talc is also excellent fragrance carriers for scented body powders. The surfaces of the talc platelets retain the perfume with a minimum loss of potency. It is also used as filler in making Toiletries.

Paper Application:

• Used as pitch and stickies control agents, Iris talcs improve runnability, reducing machine downtime, cleaning times, prolonging felt lifetimes, and boosting productivity.
• They are cost effective alternatives to chemicals used in pitch and stickies control.
• They make excellent TiO2 extenders, improving TiO2 retention and performance and enhancing opacity.

Due to their oleophilic nature, Iris talcs reduce dye demand in colored papers and improve color intensity.

Paint Application:

• Iris talcs are naturally hydrophobic. When formulated into paint, the orientation of the talc platelets forms a more significant barrier, limiting the penetration of water and corrosive agents into the paint film and reducing corrosion, caulking, peeling and blistering.
• Due to its lamellarity and chemical inertness, talc also promotes adhesion increasing the paint's durability.
• Talc protects the binder from UV radiation, improving the weather resistance of exterior paints.

Rubber Application:

• Iris talcs improve processability while maintaining mechanical properties and lowering compound costs.
• Iris talcs are highly lamellar minerals. This platyness not only facilitates slippage between the platelets at solid surfaces but functions as an internal lubricant.
• In injection molding and extrusion formulations, Iris talcs : lower compound viscosities improving mold flow, reduce nerve, reduce mixing time by up to 20%—talc is organophilic and incorporates rapidly into the compound, improve extrusion rates and surface finish, minimize wear on processing equipment such as extruder screws and dies.

SPECIFICATIONS : Specs Will Be Given In PDS And Will Be Provided Only On Request Through E-Mail.

Introduction: BENAFLOC^® is trademark registered specially designed for paper industry as retention systems & contaminant control additive. The effective ingredient of BENAFLOC^® is an aluminium-hydro-silicate clay mineral (montmorillonite). BENAFLOC^® is having high ion-exchange-capacity and extremely high active surface area in aqueous dispersions. These unique properties of the material makes BENAFLOC^® the most suitable product for adsorption, flocculation and dewatering applications.

IMPORTANT CHARACTERISTICS & ADVANTAGES OF “BENAFLOC^®”

• High levels of retention of fines due to its high specific surface
• The reduction of contaminant levels in the water
• Reduction of deposits in paper machines
• Reduction of sheet holes and staining
• Reduction in frequency of machine downtimes
• Improvement of production quality
• Improvement in wastewater solids and COD
• Micronized / ultrafine product
• Very good adsorption properties for tacky substances
• Significant reduction of pitch, microstickies and potential stickies
• Very high active surface area
• Good flocculation properties
• Increases runnability of the paper machine.

Specifications: Specs Will Be Given In PDS And Will Be Provided Only On Request Through E-Mail.

Introduction : BENADRILL^® is a trademark registered high performance bentonite which is designed as per API Specifications 13A to meet oil well drilling, hydraulic-barrier applications (pond-sealing, slurry trenching, caissons, etc.) & civil engineering applications. BENADRILL^® is high swelling & sodium based activated bentonite.

Application / Usages:

• Drilling Muds
• Boring & Piling
• Pipe Jacking
• Grouting
• Fluid Reducing

Features of BENADRILL^®

• High Swelling Bentonite
• High Water Absorption
• Low Filtrate Loss
• Fantastic Gelling Strength
• Enlarged Surface Area
• Impermeability
• Lubrication & Low Compressibility

Advantages

• Advance lubrication ability
• Fast development of rheological properties (Hydration)
• Can be use under high pressure & high temperature drilling conditions
• Creation of thin filtrate cake with low permeability
• High cutting suspension capability

Specifications: Detail Specs Will Be Given In Pds And Will Be Provided Only On Request Through E-Mail.

BENA-GCL is selectively mined and processed high quality sodium based bentonite powder to ensure a low permeability containment product ideally suited to applications of landfi-ll containment.BENA-GCL is chemically modified bentonite powder which will generally give higher swell index values and lower fluid loss numbers when added with polymers.

Generally the calcium content must be kept to minimal levels as calcium montmorillonite has a much lower swelling potential than sodium montmorillonite.

BENA-GCL does not contain any Fermentable Product and is Environmentally Acceptable.

IMPORTANT CHARACTERISTICS & ADVANTAGES OF “BENA-GCL” 

• High Swelling Index
• Lower Fluid Loss
• Very high active surface area

RECOMMENDED TREATMENT

GCLs consist of a thin bentonite clay layer, which typically ranges from 5–10 mm, encased with geotextile. There are two configurations commonly used; in the first configuration, a layer of bentonite is encased between woven and non-woven geotextiles, which are needle-punched together; the second configuration is fabricated using a flexible membrane liner laminated to one side of the first type. Typical Bentonite mass per unit area using ASTM D5993 Standard is about 4 to 4.40 kg/m2 for reconstituted GCL. 

Introduction : BENASULF^® is trademark registered, high performance sodium based activated bentonite which is designed to meet requirements of Fertilizer Industry. The effective ingredient of BENASULF^® is an aluminum-hydro-silicate clay mineral (montmorillonite). BENASULF^® is used as Sulphur Pellets Binding & Dispersing Agent for all kind of Micro nutrients as well. BENASULF^® is designed for fast hydration & its high swelling capabilities make it most suitable for fertilizer industry.

IMPORTANT CHARACTERISTICS & KEY ADVANTAGES OF “BENASULF^®”

• Fast Absorption & Dispersion Capabilities: It keeps grains / pellets dry & free flowing. Helps in uniform suspension of active ingredients. It keeps ingredients intact due to high absorption characteristic & helps in uniform release into soil.
• High Swelling & Thixotropic: Due to high swelling properties with controlled mesh release of Sulphur in soil is much better.
• High Sheer, Bonding & Comprehensive Strength: Pallets resists to powdering while multiple handling.
• Excellent Gelling Strength: This makes pallets smooth, hard & bright in appearance.
• High Water Absorption: Absorbs nutrients very well & gives excellent bonding properties.
• Excellent Dry Strength: Provides pellets uniform shape and strength.

Excellent Plasticity & Lubricity

Specifications : Specs Will Be Given In PDS And Will Be Provided Only On Request Through E-Mail.

BENAGEL® HIGH is an easy mixing, high viscosity 200 bbl yield freshwater drilling fluid produced from the highest grade sodium bentonite. BENAGEL® HIGH has a Higher Performance formula that makes it very effective. This premium grade beneficiated Bentonite is designed for use in mineral exploration, water well and directional drilling operations. BENGEL® HIGH is an efficient viscosifier that performs well in a variety of water qualities and successfully reduces application rates, mixes easily and quickly. BENAGEL® HIGH does not contain any fermentable product and is environmentally acceptable.

APPLICATION :

• Pilling & Boring
• Diaphragm Cut off Wall
• Slurry Coating In Tunneling
• Horizontal Directional Drilling
• Pipe Jacking
• Drilling Muds

IMPORTANT CHARACTERISTICS & ADVANTAGES OF “BENAGEL® HIGH” :

• 220 to 235 barrel yield
• Mixes rapidly for fast hydration
• Carries cuttings in mud with lower solids content
• Enhances fluid loss characteristics; reduces seeping into permeable formations
• Cools and lubricates bit
• Highly concentrated for maximum yield
• Excellent Plasticity & Viscosity
• Low Filtrate Loss
• Enlarged Surface Area
• Advance Lubrication
• Assists in bore hole stabilization
• Helps eliminate loss circulation conditions

SPECIFICATIONS : 

• Detail Specs Will Be Given In PDS And Will Be Provided Only On Request Through E-Mail.

RECOMMENDED TREATMENT :

Mixing ratios are based on 200 bbl yield material using freshwater. Level of water purity will affect bentonite performance. Prior to mixing, acidic and hard water should be treated with soda ash to a pH of 8.5-9.5. For best results, add BENAGEL® HIGH slowly through a jet/hopper mixer.

BENGEL HIGH mixing ratios in pounds per 100 gallons of water

Normal Conditions  15-25 lbs

Sand and Gravel    25-35 lbs

Fluid Loss Control  34-40 lbs

Introduction : BENAFEED^® Natural bentonite designed to meet the requirements of adsorbent industries like Cattle Feed & Poultry Feed Applications. The effective ingredient of BENAFEED^® is an aluminium-hydro-silicate clay mineral (montmorillonite). BENAFEED^® is used as additive & binding agent in Cattle and Poultry Feeds along with other micro nutrients. BENAFEED^® is widely used in the animal feed Industries both in granular and powder form. Because of its purity and fast hydration & swelling capacity. BENAFEED^® has excellent mycotoxin absorption capacity which is irreversible process. BENAFEED^® is specially designed to meet the requirements of animal feed industries as per International Specifications.

IMPORTANT CHARACTERISTICS & ADVANTAGES OF “BENAFEED^®”

• Large Surface Area
• High Swelling & Thixotropic Properties
• Fast Absorption & Dispersion Capabilities: It has the ability to absorb Mycotoxins & this keeps ingredients intact due to adsorption characteristics.
• High Shear, High Bonding & Compressive Strength: Improve Pallet quality and durability
• High Water Absorption: Quick development of Bonding properties
• Excellent Gel Strength Properties: Forms smooth & hard pallets.
• Good Dry Strength

Specifications : Specs Will Be Given In PDS And Will Be Provided Only On Request Through E-Mail.

Introduction: BENAEARTH^® is high performance sodium based bentonite which is designed to cater requirements of Earthing Application. BENAEARTH^® can be easily used in areas with high soil resistivity, as a ground enhancement material, improves moisture retention of the soil, and this improves grounding effectiveness for Electrical Earthing.

Important Characteristics & Advantages of “BENAEARTH^®”

• High Water Absorption Capabilities & Large Surface Area: Its high water absorption capability keeps water retention in soil & can maintain moisture for long duration & no need to recharge.
• Nontoxic, Non-Inflammable & Environmental Friendly: Its nontoxic properties does not harm human body or animals & hence it is very environmental friendly.
• No corrosion of earthing conductors (electrodes)
• Low Resistivity: It is ideal for electron earthing of rock ground or even this can be easily used in desert areas.
• Low setup & maintenance cost .

Specifications : Specs Will Be Given In PDS And Will Be Provided Only On Request Through E-Mail.

BENAFLOC®-HIGH is specially designed for paper industry as retention systems &contaminant control additive. The effective ingredient of BENAFLOC®-HIGH is an aluminium-hydro-silicate clay mineral (montmorillonite). BENAFLOC®-HIGH is having high ion-exchange-capacity and extremely high active surface area in aqueous dispersions. These unique properties of the material makes BENAFLOC®-HIGH the most suitable product for adsorption, flocculation and dewatering applications. BENAFLOC®-HIGH is mined and processed in North West part of India. BENAFLOC®-HIGH contains more than 70 % active montmorillonite clay content and specially designed to meet the requirements of Paper industries as per International Specifications. BENAFLOC®-HIGH does not contain any fermentable product and is environmentally acceptable.

IMPORTANT CHARACTERISTICS & ADVANTAGES OF “BENAFLOC® HIGH” 

• High levels of retention of fines due to its high specific surface
• The reduction of contaminant levels in the water
• Reduction of deposits in paper machines
• Reduction of sheet holes and staining
• Reduction in frequency of machine downtimes
• Improvement of production quality
• Improvement in wastewater solids and COD
• Micronized / ultrafine product
• Very good adsorption properties for tacky substances
• Significant reduction of pitch, microstickies and potential stickies
• Very high active surface area
• Good flocculation properties
• Increases runnability of the paper machine

Introduction : BENAPEN^® is trademark registered, specially designed bentonite for pencil industry as lead binder. The effective ingredient of BENAPEN^® is an aluminium-hydro-silicate clay mineral (montmorillonite). BENAPEN^® is having good binding property, which makes this material the most suitable product for pencil manufacturing.

Important Characteristics & Advantages of “BENAPEN^®”

• High Water Absorption
• Large Surface Area
• Fast Bond Development : Quick Binding Properties
• High Shear & Compressive Strength: Provides shape and strength to pencil leads.
• Excellent Thermal Stability : High pencil lead quality and low clay usage
• Best Green Strength, Gel strength and Dry strength Properties: Minimum rejections in process.

Specifications : Specs Will Be Given In PDS And Will Be Provided Only On Request Through E-Mail.

INTRODUCTION:

• BARITE is a mineral composed of barium sulphate, BaSO4.
• It is usually colourless or milky white, but can be almost any colour, depending on the impurities trapped in the crystals during their Formation.
• It is unusually heavy for a non-metallic mineral.
• It’s high density is responsible for its value in many applications such as Drilling, Paint & Rubber.
• BARITES is chemically inert and insoluble.
• BARITES (BaSO4) is the most common mineral of Barium.
• Name BARITES was named from the Greek word ‘baros’ which means weighty, a reference to its unusually high specific gravity.

IMPORTANT CHARACTERISTICS & KEY USES OF BARITES
Drilling Application: High Density & Specific GravityofDrilling Grade Grey Barite is used in Oil & Gas Drilling industries as a drilling mud in both onshore and offshore. India is the largest supplier of good quality Barite for Drilling.

Paint Applications: High Specific Gravity Grade Barites is used in paint industry where whiteness is not of importance. This product is highly cost efficient and will suit in paint manufacturing applications where its high specific gravity of 4.3 - 4.4 and purity of 96% will give competitive advantage.

Adhesives and Rubber: High Specific Gravity Grade Barites is used in Rubber and Adhesive industry as Inert and color-neutral density enhancer in noise and vibration reduction systems. Extension levels up to 80% can be achieved. Excellent for use in adhesives, mastic compounds, epoxy resin sizing pastes, unsaturated polyester and polyurethane systems, and also in glazes and impregnation agents, grinding pastes, lubricants and separating agent. In an adhesive or sealant formulation, barium sulfate is an excellent filler choice in specialized applications where X-ray absorbance or chemical resistance is a necessity.

White Paint Applications: Iris Impex is also active in the field of mining & processing White Barites. Barite occurs naturally in white colour in small quantities but commands a high premium in the white paint market.

SPECIFICATIONS : Specs Will Be Given In PDS And Will Be Provided Only On Request Through E-Mail.

Introduction: BENAPELL^® is trademark registered, selectively mined and processed high swelling sodium based bentonite suitable for iron ore pelletizing plants. BENAPELL^® is used as green and dry ore binder for all kind of pellets. BENAPELL^® offers superior performance as per ASTM Specifications.

Important Characteristics & Advantages of “BENAPELL^®”

• Fast Bond Development
• High Water Absorption Properties
• High Swelling & Bonding
• High Shear & Compressive Strength: Benapell provides shape and strength to pellets
• Best Green Strength, Gel Strength & Dry Strength Properties: Minimum Rejections in process.
• Excellent Thermal Stability: High pelletizing quality and low clay usage
• Large Surface Area

Specifications: Specs Will Be Given In PDS And Will Be Provided Only On Request Through E-Mail.

Introduction : BENAFFIX^® is trademark registered, selectively mined and processed high swelling sodium based bentonite with High Thermal Stability. BENAFFIX^® is sodium activated bentonite designed to meet the requirements of modern foundry set up especially high pressure moulding lines (Flask / Flaskless) and deep drawn castings. Use of BENAFFIX^® imparts Low Specific Burnout Ratio in mouldings sand due to its High Purity & Thermal Durability than Conventional Bentonite.

Important Characteristics & Advantages of “BENAFFIX^®”

• Fast Bond Development: High milling efficiency and increased sand throughput
• Wide Moisture Tolerance: Flexible sand control and consistent quality
• Exceptional Mould Ability: Excellent mould integrity and high casting definition
• High Swelling & Wet Tensile: Exceptional resistance to expansion and hot sand defects
• Excellent Thermal Stability: High casting quality due to low dead clay
• Reduced Consumption of Bentonite
• Increased Dimensional Accuracy with Controlled Weight of Castings

Specifications: Specs Will Be Given In PDS And Will Be Provided Only On Request Through E-Mail.

Introduction: BENAGEL^® is a trademark registered, high performance bentonite which gives better performance than API / OCMA Specifications. BENAGEL^® is a sodium based activated bentonite specially designed for civil engineering applications.

Applications / Usages :

• Production of Geosynthetic Clay Liners
• Soil Sealing, Sealant, Sanitary Pit Fills
• Diaphragm Cut off Wall
• Slurry Coating In Tunnelling
• Pipe Jacking
• Horizontal Directional Drilling
• Drilling Muds
• Cement Slurries

Features of BENAGEL^®

• High Swelling Bentonite
• High Water Absorption
• Low Filtrate Loss
• Fantastic Gelling Strength
• Enlarged Surface Area
• Low Permeability
• Advance Lubrication

Specifications: Specs Will Be Given In PDS And Will Be Provided Only On Request Through E-Mail.

INTRODUCTION:

• The Lamellarity, Whiteness and Purity of the Iris Impex talc are the key factors which gives us a competitive edge over the other options available in the global market.
• Compacted talc products are processed by using the state-of-art technology for Ultra Fine talc grades to optimize their reinforcement characteristics which is very helpful in enhancing the bulk density.
• Our in-house processing technology takes utmost care of the particle shape and the high aspect ratio.
• Our manufacturing and processing results are an excellent source of fulfilling the growing needs of the ceramic, cosmetic, paper, paint, rubber and plastic industries globally.

We manufacture and Exports Talc / Soapstone powder of various grades in customized packing.

VARIOUS FEATURES & APPLICATIONS OF "IRIS TALC"
Ceramics Application:

• Used in combination with feldspar, talc brings magnesium oxide to the ceramic flux which:
• Lowers fusion temperature
• Speeds up the vitrification process
• Improves composition viscosity
• Increases surface tension
• Stabilizes thermal expansion – important for large format tiles.

Cosmetic Application:

With its soft, silky feel our cosmetic grade talc makes an excellent base for body and baby powders. Applied after bathing, it prevents chafing and gives a soft, soothing, cool sensation. Our cosmetic grade talc is also excellent fragrance carriers for scented body powders. The surfaces of the talc platelets retain the perfume with a minimum loss of potency. It is also used as filler in making Toiletries.

Paper Application:

• Used as pitch and stickies control agents, Iris talcs improve runnability, reducing machine downtime, cleaning times, prolonging felt lifetimes, and boosting productivity.
• They are cost effective alternatives to chemicals used in pitch and stickies control.
• They make excellent TiO2 extenders, improving TiO2 retention and performance and enhancing opacity.

Due to their oleophilic nature, Iris talcs reduce dye demand in colored papers and improve color intensity.

Paint Application:

• Iris talcs are naturally hydrophobic. When formulated into paint, the orientation of the talc platelets forms a more significant barrier, limiting the penetration of water and corrosive agents into the paint film and reducing corrosion, caulking, peeling and blistering.
• Due to its lamellarity and chemical inertness, talc also promotes adhesion increasing the paint's durability.
• Talc protects the binder from UV radiation, improving the weather resistance of exterior paints.

Rubber Application:

• Iris talcs improve processability while maintaining mechanical properties and lowering compound costs.
• Iris talcs are highly lamellar minerals. This platyness not only facilitates slippage between the platelets at solid surfaces but functions as an internal lubricant.
• In injection molding and extrusion formulations, Iris talcs : lower compound viscosities improving mold flow, reduce nerve, reduce mixing time by up to 20%—talc is organophilic and incorporates rapidly into the compound, improve extrusion rates and surface finish, minimize wear on processing equipment such as extruder screws and dies.

SPECIFICATIONS : Specs Will Be Given In PDS And Will Be Provided Only On Request Through E-Mail.

Introduction: BENAFLOC^® is trademark registered specially designed for paper industry as retention systems & contaminant control additive. The effective ingredient of BENAFLOC^® is an aluminium-hydro-silicate clay mineral (montmorillonite). BENAFLOC^® is having high ion-exchange-capacity and extremely high active surface area in aqueous dispersions. These unique properties of the material makes BENAFLOC^® the most suitable product for adsorption, flocculation and dewatering applications.

IMPORTANT CHARACTERISTICS & ADVANTAGES OF “BENAFLOC^®”

• High levels of retention of fines due to its high specific surface
• The reduction of contaminant levels in the water
• Reduction of deposits in paper machines
• Reduction of sheet holes and staining
• Reduction in frequency of machine downtimes
• Improvement of production quality
• Improvement in wastewater solids and COD
• Micronized / ultrafine product
• Very good adsorption properties for tacky substances
• Significant reduction of pitch, microstickies and potential stickies
• Very high active surface area
• Good flocculation properties
• Increases runnability of the paper machine.

Specifications: Specs Will Be Given In PDS And Will Be Provided Only On Request Through E-Mail.