Weighing Scales & Measuring Tapes

We offer the best product range of Compression Type Loadcell, Rope Tension Load Cell, Binocular Load Cell, Button Type Load Cell and Compression Load Cell.

Compression Type Loadcell

The envisaged Built-in Crane Weighing System consists of Compression type loadcells placed underneath the mechanical assembly supporting the equalizing barpulley. The typical arrangement is shown below.The output from the loadcells corresponding to the load applied is processed and displayed digitally in the indicator housed in crane control cabin. A separate parallel 50100200300 mm display is also provided at the girder of the crane to enable viewing of the weight from the floor. The system has a potential free contact that would be activated if the crane is over loaded. It is possible to transmit the data from the weighing electronics to a base station receiver through Wi-Fi or ZigBee protocol.There are options for the electronics to communicate with the crane PLC via analog output or any communication protocol such as MODBUS or Profibus.The power supply for the system is taken from the single phase AC 230V available in the Crane Cabin. A switch mode power supply is provided internally so that it will take care of voltage variation as well as spikes.Accelerometer utilizes the spring-mass system for generating a force proportional to the amplitude of the input acceleration to the base of the system. Force is applied to the piezoelectric (PE) element made of leadzirconate titan ate (PZT) material that produces a charge output proportional to the force. The PE material is self-generating and does not require an external power source.

View Complete Details

Ask Latest Price & Details

Rope Tension Load Cell

Rope tension loadcells are very simple to install. However they can be installed only where there is a fixed non moving rope. The installation scheme is shown below.This arrangement would be able to measure the load on one rope of the total number of ropes of the crane. Therefore in principle the accuracy of this type of system would be the least. However, the advantages of this system are as follows.Simple operationReliable No periodic maintenanceEasy to installRugged-designed for industrial environment.The output from the loadcell corresponding to the load applied is processed and displayed digitally in the indicator housed in crane control cabin. The output from the loadcells corresponding to the load applied is processed and displayed digitally in the indicator housed in crane control cabin. A separate parallel 50100200300 mm display is also provided at the girder of the crane to enable viewing of the weight from the floor. The system has a potential free contact that would be activated if the crane is over loaded. It is possible to transmit the data from the weighing electronics to a base station receiver through Wi-Fi or ZigBee protocol.

View Complete Details

Ask Latest Price & Details

Binocular Load Cell

The Binocular Ring Loadcell has an IP-68 protection perfectly suited for industrial applications.Based on the bending beam principle it has excellent repeatibility and accuracy. APPLICATIONS:- Platform Scales Test Purpose Hopper Weighing System Dynamic Weighing Systems like Belt Weigher, Weigh Feeder, Screw Feeder and Bag Check Weigher etc Batching System

View Complete Details

Ask Latest Price & Details

Button Type Load Cell

These are low profile compression loadcells used in applications where there is a space constraint. Applications:TankHopperSilo Weighing Systems, Hydraulic Press Applications etc

View Complete Details

Ask Latest Price & Details

Compression Load Cell

General Purpose Compression type load cells with IP-68 protection are widely used for Tank and Hopper Weighing System, Batching Plant, Silo Weighing System, Roll Force Measurement, etc.

View Complete Details

Ask Latest Price & Details

Column Load Cell

Column type load cells with IP-68 protection are widely used for Roll Force Measurement, Silo Weighing System, Bin Level Monitoring system, etc.

View Complete Details

Ask Latest Price & Details

Double Shear Load Cell

The shearbeam load cell can be either cylindrical or rectangular. The strain gauges are placed at the bottom of the blind holes. The strain gauges are mounted on the beam at 45 degrees to the longitudinal axis. When the load is applied to the beam, gauges along 45 degrees become longer (tension), along 135 degree become shorter (compression), thereby unbalancing the bridge. The shear beam load cell is insensitive to lateral forces, and point of application of torque is not critical. Shear Beam Loadcells with IP-68 protection is used mainly for Lorry Weigh Bridges.

View Complete Details

Ask Latest Price & Details

Double Ended Shear Beam

Double Ended Shear Beam loadcells are designed for central mounting and loading on either side. This type of configuration ensures that the output of the loadcell is not affected by lateral loads. It is very rugged and is IP 68 protected.It is widely used for lorry weigh bridges (truck scales) and for silo weighing applications and where there is movement inside or outside the vessel like batching cars etc.

View Complete Details

Ask Latest Price & Details

Universal Load Cell

The universal shear loadcell is generally used for material testing and in applications where both compression and tension loads are to be monitored.Bag Filling, Hopper Weighing Systems, UTM & Testing applications, Electro Mechanical Weigh Bridges.

View Complete Details

Ask Latest Price & Details

Button Load Cell
Get Best Quote

Belt Weigher System
Get Best Quote

Tell Us What are you looking for? Will call you back

Contact Us

Ajay Balraj (Ipa Private Limited)
No. 472/ B- 2, 12th Cross, 4th Phase Peenya Industrial Area, Bangalore, Karnataka - 560058
Share us via
Found Something Wrong with this Listing? Report Here.