International Scientific Instrument Company

Okhla, Delhi

Water bath is made a thick stainless steel sheet of 304 grades. Heating element of ISI mark has an automatic cut out device. Complete with Concentric rings. To work on 220/230 Volts A.C.6.1)Water Bath Rectangular Double Wall: (without thermometer) ISIC Double walled, inside made of stain less steel 304 grade and out side mild sheet painted with attractive stove enamel. Temperature is controlled by a hydraulic thermostat from 5C above ambient to 100C with sensitivity of + 0.5C fitted with ISI mark Tublar Element. Bath consists of 2 pilot lamps & on/off switch, to work on 220/230 Volts A.C.

Size of inside Stainless Steel Tank L x B x D 300x250x100 mm (6 Holes of 75 mm Dia) 425x325x100 mm (12 Holes of 75 mm Dia) If fitted with PID Microprocessor Controller Dual Display instead of Thermostat will cost extra

Temperature Thermostatically controlled by hydraulic thermostat from 50C to 250C with a sensitivity of + 1C in Bare Oven. Beaded heating elements are placed in ribs at the bottom and sides. Built in L shape thermometer, Double walled, inside made of Aluminum or Stainless steel & outside mild steel sheet painted with attractive stove enamel with adjustable wire mesh Nichol plated trays, on/off Rocker switch with Indicator & Thermostat Indicator, to work on 220/230 Volts A.C.

Size . Inside chamber Width x Ht x Depth 300 x 300 x 300mm (12x12x12) 27 350 x 350 x 350mm (14x14x14) 43 450 x 450 x 450mm (18x18x18) 91 450 x 600 x 450mm (18x24x18) 122 600 x 600 x 600mm (24x24x24) 216 600 x 900 x 450mm (24x36x18) 243 600 x 900 x 600mm (24x36x24) 324

Optional Accessories :
1) Air circulating fan can also be provided in each size if required at an extra cost of
2) Mechanical timer of 2 hours, can also be provided at an extra cost of

1. Digital Timer of 99.59 Hours can also be provided at

an extra cost of
4) ) PID Micro Processor Controller Dual Display with safety alarm with air circulation fan without T.M & Thermostat can also be provided in each size at an extra cost of
5) PID Micro Processor Controller Dual Display with Air Circulating fan with Direct Printer Port Rs. 20000.00

For more than four decades, olympus opto systems india pvt. Ltd (formerly olympus india pvt. Ltd.) has been manufacturing and marketing microscopes in India. In these years, the company has been committed to providing olympus gold-standard products to its indian customers, primarily medical colleges, pathology labs, universities and students in various fields of life sciences. The establishment of a new tuv-certified iso 9001: 2008 manufacturing facility in noida, uttar pradesh, has enabled olympus opto systems to enhance this commitment to its customers. The widely-popular ch20i and the cx21i series - the microscopes of choice in a number of world bank-funded public health programmes in india and many other countries are now manufactured in the noida factory. Till recently, the cx21i was being imported. Making it locally has given indian customers a substantial price advantage. Olympus opto systems india shares the olympus philosophy of customer delight. To this end, it has set up a network of sales and service centers in 10 cities across india to ensure timely response for information and service.

We are offering eppendorf pipettes.Eppendorf sets a new standard in pipetting. The ultra light eppendorf research plus pipette meets the highest needs in precision and accuracy combined with ultimate ergonomics and increased flexibility. It is a good feeling to know you are doing the right thing to know you are working with one of the most advanced pipettes in the world. A spring loaded tip cone, a secondary calibration option, an improved volume display and all that in an ultra light, fully autoclavable pipette: that is the new eppendorf research plus pipette. Ergonomics: feel the difference in weight, pipetting forces and the spring loaded tip cone. Flexibility: your next experiment will need new pipetting schemes. Your new laboratory might have different sources of contamination. Your new pipette should offer all the flexibility you need. Calibrate your research plus to your needs, autoclave the entire pipette or only the lower part. Choose among single channel, multi channel and fix-volume pipettes in different sizes. Robustness: durability was tested thoroughly and has met the highest quality requirements. Resistance to chemical, thermal and mechanical stress is now unchallenged!

Temperature Thermostatically controlled by hydraulic thermostat 5C above ambient to 70C with a sensitivity of + 0.5C in Bare Incubator. Beaded heating elements are placed in ribs at the bottom and sides, Double walled, inside Aluminum or Stainless steel & outside mild steel sheet painted with attractive stove enamel. Door has double glass viewing, built in horizontal L-shape glass thermometer with wire mesh Nichol plated adjustable trays, Rocker Switch with Indicator & Thermostat Indicator, to work on 220/230 Volts A.C. Stainless steel Chamber.Optional Accessories :

1) Air circulating fan can
2) Mechanical timer of 2 hours

1. Digital Timer of 99.59 Hours

4) PID Micro Processor Controller Dual Display with safety alarm with air circulating fan without T.M. & Thermostat
5) PID Micro Processor Controller Dual Display with Air Circulating fan with Direct Printer Port cable

Perfect System Double walled inner chamber made of Stainless Steel sheet 304 grade & outer mild steel stoving painted. Specially designed wire mesh shelves made of SS 304 grade. Gap between the walls is filled with puf insulation. Two Air Circulation Fans are provided for uniformity of temp in working space. Refrigeration system with CFS. Free compressor & R 134 a eco-friendly refrigerant is used. Temperature 5C to 50C with controlling accuracy of + 0.5C is controlled with Dual Display PID Micro Processor controller-cum-indicator. Built in automatic voltage stabilizer & inside full view Acrylic Door is also provided. To work on 220/230 volts AC. Traceability calibration certificate of control is also provided.

Optional Accessories

1. Internal Illumination is provided with 3 nos. fluorescent tubes of 60 c.m. length with 3 on/off separates switches: But in case of 4 cubic feet only 300 mm Length Tubes are Provided at an extra cost of
2. Automatic Cyclic timer 0 to 24 hours regulating illumination cycles for at an extra cost of .

3)Above said B.O.D Incubator can be fitted with Direct Printer Port Cable with an extra cost of .