Our Products
Laboratory Equipments
2 Products availableIndustrial Machinery
2 Products availableElectric Cutting Tools
1 Products availableSeal Machines
1 Products availableIndustrial Ovens & Furnaces
1 Products availableTesting Equipments
1 Products availableHydraulic Press
1 Products availableUniversal Testing Machine |
|
Specification:
Temperature Controller:Digital PID Controller with range up to 300C, Resolution
of 0.1C & accuracy of +0.5C.
Pan:500 Nos. of aluminium pans with 40 mesh screen in SS 316 will be provided as per DOT specification.
Gas Flow Control:Gas Regulators & Rotometers will be supplied for Nitrogen & Oxygen Gas respectively.
Indium material will be supplied for Calibration of temperature.
PRINTOUTS THROUGH PC:
The display & printout of Delta Temperature Vs Time graph along with Oxidation Induction Time result is Possible through your PC. The printout includes Partys Name, address, file name, date, batch no, Operator name, Sample weight, Set temperature, Start time, Finish time, Gas flow rate etc.
Calibration graph of melting point of indium metal along with printout facility is provided as per DOT Specification.
Cooling System: Cooling of barrel by water is provided.
for making V notch in theIzod / Charpy samples as perASTM D 256.
Specification:
Depth micrometer :Mitutoyo make.
Range :0 25mm with leastcount of 0.01mm.
Cutting angle :45.
Paint :Powder coated.
Power :230 Volts, 50Hz, single phase.
as per ASTM D 1525 and ASTM D - 648 to determine vicat softening temperature and heatdeflection temperature of plastics.
Specification:
Temperature range :From ambient to 300C.
No of stations :Three.
Material of construction :Inner bath: S.SOuter body: M.S
Rate of heating :120C / hour and 50C / hour.
Sensor :Range upto 10mm with resolution of 0.01mm.
Weights :A set of weights ranging from 5grams to 2000grams would be supplied for incrementalloads.
Paint :Powder coated.
Power :230 Volts, 50Hz, single phase.
Graphic display and printout through PC:Penetration/Deflection Vs Temperature graph and numeric reports consisting values of vicat softening temperature and heat deflection temperature could be obtained by attaching a printer to the PC.
as per ASTM D 1603, IS 4984 and IS 2530 to determine carbon black content of plastics.
Specification:
Size of furnace :10 inch x 8 inch x 8 inch.
Material of construction:M.S.
Temperature range :Ambient to 1150 C
Accessories :Desiccator, Glass U tube, Combustion tube, Combustion boat, Rotometer, Rubber tube [1 no. each], Glass end caps 2 nos. and Glass traps 3 nos.
Paint :Powder coated.
Power :230 V 50Hz, single phase.
to cut samples having thickness up to 4mm.
Specification :
Capacity :5 tonnes*.
Operation :Manual.
Horizontal day light :12 inch.
Cross travel :4 inch.
Paint :Powder coated.
Temperature zone:Two.
Controller:Auto tuned PID controller with temperature range up to 200 deg C having
resolution of 0.1 degree centigrade.
Clamping Jaws:One fixed and second movable by pneumatic action.
Day light:50 mm.
Sealing dimensions:Length 150 mm x Width 20 mm.
Mounting:Table top.
Power requirement:230 Volts, 60 Hz, Single phase 15 ampere.
with radial air circulation and auto shut facility.
Specification:
Size of working chamber :12 inch X 12 inch X 12 inch*.
Material of construction :M.S.
Temperature range :Ambient to 250C.
Air circulation :Radial fan (It saves powerat least 20% by re-circulating the same hot airinside the oven).
Timer :Digital presettable with range upto 999 minutes.
Paint :Powder coated.
Power supply :230 Volts, 50Hz, single phase.
tensile testing is a most significant and popular test procedure which is performed in different production verticals to measure the elongation strength and durability of the products. Tensile testing is also known as tension testing, this test shows at what point sample fails when an extensive amount of tensile force is applied to the sample. It helps the engineers to measure the maximum force a material can tolerate to its maximum before it brakes and helps to decide the suitability of the material for a particular application.
the tensile test is performed using a high-quality testing machine known as tensile tester or tensile testing machine to determine properties of tensile and elongation as perastm d - 638 / astm d 882 of plastics eco version.
specification:
load capacity :up to 500 kg*.
no. Of load cell :one.
cross travel :up to 1000mm*.
speed :variable between 10mm/minute to 500mm/minute.
paint :powder coated.
power :230 volts, 50hz, single phase.
direct display through microcontroller :peak load, area and tensile strength at peak load.
Specification:
Size of the working chamber :4 inch X 4 inch X 9 inch*
Material of construction :M.S
Temperature range :Ambient to 1150C
Paint :Powder coated.
Power :230 Volts, 50Hz, single phase.
as per astm d - 1693 to determineenvironmental stress cracking of ethylene plastics.
specification:
temperature range :from ambient to 200c.
no. Of stations :six.
material of construction :inner bath: s.souter body: m.s
accessories :cutting die, nicking jig, bending cum transfer tool and aluminium foil 1no.each, specimen holder, test tube and rubber cork 6 nos. Each.
paint :powder coated.
power :230volts, 50hz, single phase.
to determine the effect of relative humidityon sample at various temperatures.
Computerised Humidity chamber to determine the effect of relative humidity on sample at various temperatures.
Specification:
Size of the working chamber :18 inch X 18 inch x 24 inch*
Material of construction :Inner bath: S.SOuter body: M.S
Humidity range :20% RH to 95% RH.
Temperature range :10C to 85C
Compressor :CFC free.
Direct display and printout through microcontroller :Set RH, Actual RH, Set temperature and Actual temperature.
Graphic display and printout through PC:In addition to the above values, % RH and Temperature Vs Time graph could beobtained by attaching a printer to the PC.
Paint :Powder coated.
Power :230 Volts, 50 Hz, Single phase.