Our Products
as per IS 4984 and IS 4985 to check the creep rupture of pipe when subjected to internal pressure under a specified condition. Pressure range : 0 100 bar*.No. of stations : 8 nos. Pressure input : Through compressed air having pressure upto 5 kg/cm.sqPressure output: through hydro-pneumatic pump. Time range : 0 999.9 hours. Panel mounting : Trolley with castor wheels. Paint : Powder coated. Power : 230 Volts, 50Hz, single phase. Direct display through MMI :Set pressure, Actual pressure, Set time, Actual time, Set temperature and Actual temperature. Graphic display and printout through PC :In addition to the above values Pressure & Temperature Vs Time graph could be obtained for any station by attaching a printer to the PC.
as per Tappy T 815 standard to determine the coefficients of friction between film to film, film to metal and film to glass.
Specification:
Microcontroller with alpha numeric key pad having built-in temperature controller with temperature range up to 400 degree centigrade, resolution of 0.1 degree Centigrade and accuracy of +/- 0.1 degree Centigrade similarly built-in timer with range 999.9 seconds.
Piston Travel: Up to 25 mm & resolution of 0.02 mm.
Specimen cutting: Motorized.
Specimen Weighing: Automatic up to 60 gm and resolution of 1 mg. Weight: 0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg & 21.6 kg hard chrome plated weights. Digital Display: Individual MFI, MVR, Melt Density results & average results. PC output: Through serial port with Window 7 compatible software. Accessories: Standard accessories*. Paint: Powder Coated. Power Supply: 230 Volts, 50 Hz, Single Phase.
to check the adhesive strength between two samples. Specification: Load capacity : Up to 5 kg.*No. of load cell: One. Cross Travel : Up to 250 mm* Speed : 300 mm/minute. Direct display : Peak load. Paint : Powder coated. Power : 230 Volts, 50 Hz, single phase.
Specification: Capacity : Up to 25.00 Joules.Release angle of pendulum: 150 degree. Range of four scales : 0-2.71 Joules, 0-5.42 Joules, 0-10.84 Joules, 0-21.68 Joules and 0-25.00 Joules.Minimum resolution on scale: 0.02 Joule, 0.05 Joule, 0.1 Joule, 0.2 Joule and 0.2 Joule respectively. Paint : Powder coated. Power : 230 Volts, 50Hz, single phase. Direct display through microcontroller: Impact strength in joules/meter and kg-cm/cm. Graphic display and printout through PC: Impact energy Vs Angular displacement graph and numeric reports consisting of values for impact strength as per ASTM standard, ISO and IS standard in different units could be obtained by attaching a printer to the PC.
for conditioning of pipes for impact test as per IS 4984 and IS 12235 (Part 9).
Material of construction : Inner bath : S.SOuter Body : M.S
International equipments developed the first dart impact tester way back in year 1971 as per the ASTM D 1709 and IS 2508 standard. This equipment is mainly designed to check the impact failure weight of film and sheeting by a falling weight impact method.
In addition to dart impact tester other equipment such as coefficient of friction, tensile tester, heat sealer, opacity tester, melt flow index tester, peel bond tester are also offered by international equipments Specification: Dart : 2 nos. Weights : A set of weights ranging from 5 grams to 500 grams would be supplied for incremental loads.