Quarter Horse Series, Electric and Battery powered models for powering tools and cylinders up to 25 Ton.

HIGH PERFORMANCE IN COMPACT PACKAGE. ELECTRIC AND BATTERY POWERED MODELS FOR POWERING TOOLS AND CYLINDERS UP TO 25 TON.

• Portable power source for hydraulic cylinders, and tools.
• Permanent magnet motor starts easily under load, even with reduced voltage conditions.
• Battery-operated models have 8 foot (2, 4 m) power cord with alligator clips to connect to any 12 volt battery.
• Optional rechargeable battery pack with shoulder strap for maximum portability.
• Pump typically delivers 15 minutes of continuous operation at 10, 000 psi (700 bar) on a single battery.
• Pump can be operated in any position.
• 24 volt hand and foot switches available for all AC powered models.
• High-impact housing with flame retardant construction.
• Base mounting holes for fixed installations.

* Advance position holds pressure with motor shut off. Return position advances cylinder with motor running and returns cylinder with motor shut off.
** Cylinder advances with motor running and automatically returns with motor shut off.
Comes with an 2, 4 m alligator clip cord for 12 volt DC use.

Compact three-stage pump for operation with hydraulic wrenches

• Compact three-stage pump for operation with hydraulic wrenches
• Remote controls
• Multipoint connection for more torque wrenches available on option
• Three stage pump unit driven electric engine or air hydraulic
• Oil cooler for continuous operation supporting and protecting steel bracket
• 100 precision gauge, aluminium oil tank with oil level indicator
• Infinitely variable pressure adjustment between 0-10000 psi
• Adjustable maximum pressure for tool return stroke
• Designed for continuous operation, hour meter on option

1Withthedesignoftwo-stageplunger, doubleoutputandthefunctionofautomatichigh-lowpressureconversion;

2Withsmallsize, lightweight, andeasytocarry;

3Havelargeoutputflow, improvestherescueefficiency.

1Supply power to support 2 sets of tools used in combination at the same time;2 Double hose-planar interface with the lock function and dust proof device, its easier and faster for plugging;3The huge hydraulic tank capacity can easily supply power for 2 sets of tools at long distance simultaneouslyincluding heavy rescue equipment;4With large flow of high and low pressure, the action of connecting devices is fast and takes short time, improves the rescue efficiency;5Good performance on action, no movement on slippery cement ground when pump working6With superior anti-rollover start and anti-skidding performance;7The working time can lasts for more than an hour;8The unique design of safety relief valve, not only makes the equipment has the lock function that can avoid misoperation, but also ensure that the equipment can runs safely and efficiently;9With high reliability, it can start continuously at the temperature of 30-55 and boost for hundreds of times.

Standard Accessories: 2 sets of 5m bicolor high pressure hosesOptional accessories:

1According to the needcan order the high pressure hose within the length of 5-20m2portable trolley3hose reel.

Model No.BJQ-2-63/0.6-A

Number of tool connections2

EngineHONDA GX100 4-stroke petrol engineeRated engine

speed3200 200 rpm

Max. working pressure10443 psi720 bar / 72 Mpa

Flow rate high pressure2 x 40cu.in./min2 x 0.68 L/min

Flow rate low pressure2 x 122 cu.in./min2 x 2.5 L/min

Engine power2.95HP2.2 kW

Gasoline tank capacity61cu.in.1 L

Hydraulic oil tank capacity183cu.in.3 L

Working temperature range86F 131F-30C55C

Weight63.7 lbs28.5 kg

Dimensions (L x W x H)15.4 x 13.4 x 18.1 in390 x 340 x 460 mm

Doublespeed design, infinitely variable pressure adjustment between 0-700Bar.

Doublespeed design, infinitely variable pressure adjustment between 0-700Bar.

Modularity product, supply more than 200 kinds electric pump, and there have 5 different valves can choose 4L 56L multiple oil tank, and many different electrical machinery (100V 120V, 200V 240V, 350V 420V)

MP series electric hydraulic pumps suits to a wide variety of industrial and application fields to work as lifting, pushing, pulling bending, pressing, punching and many other application, it is economical and durable power source.

operated for Bolt Tensioners and other equipments in shipping vessel and wind power industry.

HNP Series Super High Pressure Electrical Pump

Single-Acting and high performance

To be operated for Bolt Tensioners and other equipments in shippingvessel and wind power industry.

To be convenient to adjust pressure with high precision Pressure Gauge

Easy to adjust pressure in range of 700-2500Bar

Simple and quick operation with high performance quick coupler

Convenient to bring with its light weight

IDEAL FOR USE WITH SMALL HYDRAULICALLY POWERED TOOLS.

• Vanguard Jr. pumps provide two-speed high performance in a light-weight, compact package.
• Gauge port provided on pump. Metal reservoir on all models.
• Equipped with a 12 hp (0, 37 kW), 115 volt, 60/50 Hz single phase motor that starts under load, even at reduced voltage.
• Low amperage draw permits use with smaller generators and low amperage circuits.
• All pumps have a 10 foot (3 m) remote control (PE183C has 25 foot (7, 6 m) remote control).
• CSA rated for intermittent duty. Noise level of 85-90 dBA.

For operating hydraulic crimping, cutting or other tools:

• No. PE183C For crimping or pressing applications. Has special electrical circuitry to pulse/advance, hold at full pressure, build to a predetermined pressure, release and reset circuit. Features separate emergency return switch.
• No. PE184C Allows you to alternately operate a spring-return cutting and/or crimping tool without disconnecting either tool. Select port connection with manual 4-way valve, start pump with remote control hand switch and extend connected tool. When hand switch is switched to off, pump stops and automatic valve opens, allowing tool to return. In center (neutral) position, manual control valve holds tool in position at time valve is shifted.

* Also for use with special single-acting cylinder applications.
** Available with 220 Volt, 60/50 Hz motor (to order, place suffix 50-220 behind pump order number). Specify voltage when ordering.
Holds when motor is shut off and valve is in advance position.
Pumps supplied with 7, 6 l oil (usable oil is 5, 7 l), will hold 9, 5 l when filled to within 13 mm below reservoir cover plate.
Not to be used for lifting.

IDEAL FOR POWERING SINGLE-ACTING CYLINDERS AND PORTABLE HYDRAULIC TOOLS.

• Easier to operate than a hand pump, giving you the speed you need at an affordable price.
• Easy and economical to service; not a throw away unit.
• Unique bladder design for all-position operation and storage.
• Operates on 40-120 psi (3-8 bar) shop air, at 20 cfm (570 l).
• Hard-coat anodized aluminum housing.
• Oil filler with integral safety relief minimizes chance of damage to reservoir bladder if overfilling occurs.

Metalic And Non Metalic Construction

These pumps are available in Aluminium, Stainless Steel and Polypropylene in sizes from 1/2inch to 3 inches. The specifications are as given below. We also provide service and sparesfor other makes of AODD pumps.

Quarter Horse Series, Electric and Battery powered models for powering tools and cylinders up to 25 Ton.

HIGH PERFORMANCE IN COMPACT PACKAGE. ELECTRIC AND BATTERY POWERED MODELS FOR POWERING TOOLS AND CYLINDERS UP TO 25 TON.

• Portable power source for hydraulic cylinders, and tools.
• Permanent magnet motor starts easily under load, even with reduced voltage conditions.
• Battery-operated models have 8 foot (2, 4 m) power cord with alligator clips to connect to any 12 volt battery.
• Optional rechargeable battery pack with shoulder strap for maximum portability.
• Pump typically delivers 15 minutes of continuous operation at 10, 000 psi (700 bar) on a single battery.
• Pump can be operated in any position.
• 24 volt hand and foot switches available for all AC powered models.
• High-impact housing with flame retardant construction.
• Base mounting holes for fixed installations.

* Advance position holds pressure with motor shut off. Return position advances cylinder with motor running and returns cylinder with motor shut off.
** Cylinder advances with motor running and automatically returns with motor shut off.
Comes with an 2, 4 m alligator clip cord for 12 volt DC use.

Compact three-stage pump for operation with hydraulic wrenches

• Compact three-stage pump for operation with hydraulic wrenches
• Remote controls
• Multipoint connection for more torque wrenches available on option
• Three stage pump unit driven electric engine or air hydraulic
• Oil cooler for continuous operation supporting and protecting steel bracket
• 100 precision gauge, aluminium oil tank with oil level indicator
• Infinitely variable pressure adjustment between 0-10000 psi
• Adjustable maximum pressure for tool return stroke
• Designed for continuous operation, hour meter on option

1Withthedesignoftwo-stageplunger, doubleoutputandthefunctionofautomatichigh-lowpressureconversion;

2Withsmallsize, lightweight, andeasytocarry;

3Havelargeoutputflow, improvestherescueefficiency.

1Supply power to support 2 sets of tools used in combination at the same time;2 Double hose-planar interface with the lock function and dust proof device, its easier and faster for plugging;3The huge hydraulic tank capacity can easily supply power for 2 sets of tools at long distance simultaneouslyincluding heavy rescue equipment;4With large flow of high and low pressure, the action of connecting devices is fast and takes short time, improves the rescue efficiency;5Good performance on action, no movement on slippery cement ground when pump working6With superior anti-rollover start and anti-skidding performance;7The working time can lasts for more than an hour;8The unique design of safety relief valve, not only makes the equipment has the lock function that can avoid misoperation, but also ensure that the equipment can runs safely and efficiently;9With high reliability, it can start continuously at the temperature of 30-55 and boost for hundreds of times.

Standard Accessories: 2 sets of 5m bicolor high pressure hosesOptional accessories:

1According to the needcan order the high pressure hose within the length of 5-20m2portable trolley3hose reel.

Model No.BJQ-2-63/0.6-A

Number of tool connections2

EngineHONDA GX100 4-stroke petrol engineeRated engine

speed3200 200 rpm

Max. working pressure10443 psi720 bar / 72 Mpa

Flow rate high pressure2 x 40cu.in./min2 x 0.68 L/min

Flow rate low pressure2 x 122 cu.in./min2 x 2.5 L/min

Engine power2.95HP2.2 kW

Gasoline tank capacity61cu.in.1 L

Hydraulic oil tank capacity183cu.in.3 L

Working temperature range86F 131F-30C55C

Weight63.7 lbs28.5 kg

Dimensions (L x W x H)15.4 x 13.4 x 18.1 in390 x 340 x 460 mm

Doublespeed design, infinitely variable pressure adjustment between 0-700Bar.

Doublespeed design, infinitely variable pressure adjustment between 0-700Bar.

Modularity product, supply more than 200 kinds electric pump, and there have 5 different valves can choose 4L 56L multiple oil tank, and many different electrical machinery (100V 120V, 200V 240V, 350V 420V)

MP series electric hydraulic pumps suits to a wide variety of industrial and application fields to work as lifting, pushing, pulling bending, pressing, punching and many other application, it is economical and durable power source.

operated for Bolt Tensioners and other equipments in shipping vessel and wind power industry.

HNP Series Super High Pressure Electrical Pump

Single-Acting and high performance

To be operated for Bolt Tensioners and other equipments in shippingvessel and wind power industry.

To be convenient to adjust pressure with high precision Pressure Gauge

Easy to adjust pressure in range of 700-2500Bar

Simple and quick operation with high performance quick coupler

Convenient to bring with its light weight

IDEAL FOR USE WITH SMALL HYDRAULICALLY POWERED TOOLS.

• Vanguard Jr. pumps provide two-speed high performance in a light-weight, compact package.
• Gauge port provided on pump. Metal reservoir on all models.
• Equipped with a 12 hp (0, 37 kW), 115 volt, 60/50 Hz single phase motor that starts under load, even at reduced voltage.
• Low amperage draw permits use with smaller generators and low amperage circuits.
• All pumps have a 10 foot (3 m) remote control (PE183C has 25 foot (7, 6 m) remote control).
• CSA rated for intermittent duty. Noise level of 85-90 dBA.

For operating hydraulic crimping, cutting or other tools:

• No. PE183C For crimping or pressing applications. Has special electrical circuitry to pulse/advance, hold at full pressure, build to a predetermined pressure, release and reset circuit. Features separate emergency return switch.
• No. PE184C Allows you to alternately operate a spring-return cutting and/or crimping tool without disconnecting either tool. Select port connection with manual 4-way valve, start pump with remote control hand switch and extend connected tool. When hand switch is switched to off, pump stops and automatic valve opens, allowing tool to return. In center (neutral) position, manual control valve holds tool in position at time valve is shifted.

* Also for use with special single-acting cylinder applications.
** Available with 220 Volt, 60/50 Hz motor (to order, place suffix 50-220 behind pump order number). Specify voltage when ordering.
Holds when motor is shut off and valve is in advance position.
Pumps supplied with 7, 6 l oil (usable oil is 5, 7 l), will hold 9, 5 l when filled to within 13 mm below reservoir cover plate.
Not to be used for lifting.

IDEAL FOR POWERING SINGLE-ACTING CYLINDERS AND PORTABLE HYDRAULIC TOOLS.

• Easier to operate than a hand pump, giving you the speed you need at an affordable price.
• Easy and economical to service; not a throw away unit.
• Unique bladder design for all-position operation and storage.
• Operates on 40-120 psi (3-8 bar) shop air, at 20 cfm (570 l).
• Hard-coat anodized aluminum housing.
• Oil filler with integral safety relief minimizes chance of damage to reservoir bladder if overfilling occurs.

Metalic And Non Metalic Construction

These pumps are available in Aluminium, Stainless Steel and Polypropylene in sizes from 1/2inch to 3 inches. The specifications are as given below. We also provide service and sparesfor other makes of AODD pumps.