GST : 36AGRPJ2053M1Z0
Verified
Add Review
Our Product / Services
Our product range contains a wide range of Hydra Grip-O-Matic Set, Universal Pullers: 55 Ton, Mechanical Push-Pullers, Hydraulic pullers and Hydraulic Puller ( Inbuilt)
Includes a hydraulic power module, 2-way puller head, jaws, legs and bearing splitter attachment in a conveneint carrying case.
Hydra Grip-O-Matic pulling system These pullers are ideal for pulling a wide variety of press-fitted parts including bushings, bearings, wheels, gears and pulleys. Grip-O-Matic pullers have been rigorously tested for top performance and reliability. PH82K is a complete pulling system which includes a hydraulic power module, 2-way puller head, jaws, legs and bearing splitter attachment; all contained in a convenient carrying case.
| ORDER NUMBER |
CYLINDER CAPACITY (TONS) |
REACH | MINIMUM REACH (MM) |
MAXIMUM STUDS (MM) |
SPREAD JAWS (MM) |
STROKE (MM) |
WEIGHT (KG) |
|
|---|---|---|---|---|---|---|---|---|
| STUDS (MM) |
JAWS (MM) |
|||||||
| PH63C | 6 | – | 152 | – | – | 200 | 80 | 4,9 |
| PH83C | 8 | – | 190 | – | – | 249 | 80 | 6,6 |
| PH113C | 15 | – | 229 | – | – | 280 | 80 | 8,0 |
| PH303C | 30 | 266,7 | 375 | – | – | 540 | 110 | 32,3 |
| PH82K | 8 | 266,7 | 207 | 125 | 300 | 245 | 80 | 9,5 |
| HST11S* | 11 | – | 150 | – | – | 409,6 | 80 | 14,5 |
Enforcer 55: Hydraulic lift system for easy, precise position of 55 Ton puller.
Enforcer 55 Series
Note:Cart and Puller (cart width is 813 mm)
Note:Also available in 110 Volt
Conversion Kit (PH553C series to PH553CL series)
| 251468 | Kit converts PH553C series to PH553CL series. Jaws are 305 mm longer. Kit contains three jaws and six straps with guards. | 114 |
ENFORCER 55
| ORDER NUMBER |
MINIMUM SPREAD (MM) |
REACH MINIMUM SPREAD (MM) |
MAXIMUM SPREAD (MM) |
REACH MAXIMUM SPREAD (MM) |
OVERALL LENGTH* (MM) |
CYLINDER STROKE (MM) |
POWER SOURCE REQUIREMENTS |
WEIGHT (KG) |
|---|---|---|---|---|---|---|---|---|
| PH553C-E220 | 101,6 | 559 | 1.219 | 356 | 2.286 | 159 | 230 V, 50 Hz, 15 Amp Capacity | 339 |
| PH553C13-E220 | 101,6 | 381 | 1.219 | 178 | 2.286 | 337 | 230 V, 50 Hz, 15 Amp Capacity | 352 |
| PH553CL-E220 | 63,5 | 829 | 1.149 | 737 | 2.591 | 159 | 230 V, 50 Hz, 15 Amp Capacity | 366 |
| PH553C13-E220 | 63,5 | 651 | 1.149 | 559 | 2.591 | 337 | 230 V, 50 Hz, 15 Amp Capacity | 379 |
Selection and Capacity Rating
Each Push-Pullers specified tonnage capacity is determined using its standard legs in tension. Using longer legs, or a setup in which the legs are in compression, will reduce the capacity. Always select the largest capacity puller and the shortest legs that will fit the job.
Meets Federal Specification: GGG-P-00781-D
| ORDER NUMBER |
CAP. (TONS) |
DESCRIPTION | WEIGHT (KG) |
|---|---|---|---|
| 927 | 10 | 10-Ton Capacity can be used with bearing pulling attachment (1123) or pulley pulling attachment (679). May also be used with Nos. 1150, 1151, 1152, or 1153 internal pulling attachments. | 3,2 |
| 938 | 17 ½ | 171⁄2-Ton Capacity can be used with bearing pulling attachments (1124 and 1130) or pulley pulling attachments (679 and 680). May also be used with Nos. 1150, 1151, 1153, 1165, or 1166 internal pulling attachments. | 9,4 |
| 939 | 30 | 30-Ton Capacity can be used with bearing pulling attachments (1126 and 1127) or No. 680 pulley pulling attachment (Note: two 8012 adapters are required to connect 680 to puller). Can be used with No. 1165 internal pulling attachment. |
10 Ton Capacity, Mechanical Push-Puller®:
| ORDER NUMBER |
CAPACITY (TON) |
MAXIMUM | SCREW (MM) |
SIZE | NOTES | WEIGHT (KG) |
|
|---|---|---|---|---|---|---|---|
| REACH (MM) |
SPREAD (MM) |
||||||
| 927 | 10 | 210 | 54 – 184 | 3/4″ – 16 x 305 mm | 1/2″ of forcing screw tip end is threaded 5/8″-18 | Legs (1100) and leg ends (24827) included. | 3,2 |
Available Components for 927
| ORDER NUMBER |
DESCRIPTION | WEIGHT (KG) |
|---|---|---|
| 1100 | 171 mm Legs | 0,45 |
| 1101 | 400 mm Legs | 1,5 |
| 1102 | 298 mm Legs | 1 |
| 1103 | 121 mm Legs | 0,45 |
| Extra Legs (pair) for Push-Puller® (927) (Reach equals leg length plus 50,8 mm with leg end caps.) |
||
Hydraulic Pullers
Federal Specification: GGG-P-00781-D
CAUTION:Always use a 3-jaw puller where clearance permits in order to provide a more stable setup and a more even pulling force.
5 Ton Capacity, 2/3 Jaw Puller:
5 Ton Capacity, 2/3 Jaw Puller:
| ORDER NUMBER |
CAPACITY (TONS) |
DESCRIPTION | WEIGHT (KG) |
|---|---|---|---|
| 1057 | 5 | 2-jaw/3-jaw puller only | 3,5 |
| PACKAGES: | |||
| PH53C | 5 | Combination 2-jaw/3-jaw puller set. Includes 1057 puller, RPS55 hydraulic set (C55C cylinder, P12 10,000 psi hand pump, fittings, coupler, and 1,8 meter hose), and 309874 pushing adapter. | 9,1 |
| PH53CR | 5 | Combination 2-jaw/3-jaw puller set. Includes 1057 puller, C55C cylinder, and 309874 pushing adapter. | 5,5 |
Available Components for 5 Ton Capacity:
| ORDER NUMBER |
DESCRIPTION | WEIGHT (KG) |
|---|---|---|
| 309874 | 15,9 mm diameter pushing adapter (included with PH53c and PH53CR hydraulic puller sets.) | 0,3 |
| 309875 | 22,2 mm diameter pushing adapter | 0,3 |
| 47997 | 2-way/3-way puller head. (Can be used to convert 1038 7 ton manual puller into a 5 ton hydraulic puller.) | 1,1 |
10 Ton Capacity, 2/3 Jaw Puller:
| ORDER NUMBER |
CAPACITY (TONS) |
DESCRIPTION | WEIGHT (KG) |
|---|---|---|---|
| 1060 | 10 | Combination 2-jaw/3-jaw puller only (Cylinder and pump set, hose, coupler, and adapter No. 202179 not included). | 7,7 |
| PACKAGES: | |||
| PH103C | 10 | Combination 2-jaw/3-jaw puller. Set includes 1060 puller, RPS1010 cylinder and pumps set, 202179 threaded adapter, and 34602 pushing adapter. | 23,6 |
| PH103CR | 10 | Combination 2-jaw/3-jaw puller. Set includes 1060 puller, 202179 threaded adapter, 34602 pushing adapter, and C1010C cylinder only. (Pump and hose not included). | 14,5 |
| NOTE: This puller may be used with any 10 ton single-acting cylinder having a 2 1/4″-14 straight collar thread. | |||
17 1/2 Ton Capacity, 2 Jaw Puller:
| ORDER NUMBER |
CAPACITY (TONS) |
DESCRIPTION | WEIGHT (KG) |
|---|---|---|---|
| 1064 | 17 1/2 | 2-jaw puller only. (Cylinder, pump, hose, coupler, screw, and crank not included). | 10,0 |
| PACKAGES: | |||
| PH172 | 17 1/2 | 2-jaw puller (1064) with RT172 center-hole Power-Twin® cylinder, cylinder half coupler, P55 pump 1,8 meter hose, hose half coupler, 1”- 8 x 508 mm long adjusting screw, and adjusting crank | 27,7 |
17 1/2 Ton Capacity, 3 Jaw Puller:
| ORDER NUMBER |
CAPACITY (TONS) |
DESCRIPTION | WEIGHT (KG) |
|---|---|---|---|
| 1066 | 17 1/2 | 3-jaw puller only. (Cylinder, pump, hose, coupler, screw, and crank not included). | 16,3 |
| PACKAGES: | |||
| PH173 | 17 1/2 | 3-jaw puller (1066) with RT172 center-hole Power-Twin® cylinder, cylinder half coupler, P55 pump 6-ft. hose, hose half coupler, 1”-8 x 508 mm long adjusting screw, and adjusting crank | 34,0 |
| PH173R | 17 1/2 | 3-jaw puller (1066) with screw and crank, and RT172 center-hole twin cylinder | 25,4 |
30 Ton Capacity, 3 Jaw Puller:
| ORDER NUMBER |
CAPACITY (TONS) |
DESCRIPTION | WEIGHT (KG) |
|---|---|---|---|
| 1074 | 30 | 3-jaw puller only. (Cylinder, pump, hose, coupler, screw, and crank not included). | 40,9 |
| PACKAGES: | |||
| PH303 | 30 | 3-jaw puller (1074) with RT302 center-hole Power-Twin Cylinder, cylinder half coupler, P55 pump, 1,8 meter hose, hose half coupler, 1 ¼” – 7 x 610 mm long adjusting screw, and adjusting crank. | 67,7 |
| PH303R | 30 | 3-jaw puller (1074) with screw and crank, and RT302 center-hole twin cylinder. | 59 |
50 Ton Capacity, 3 Jaw Puller:
| ORDER NUMBER |
CAPACITY (TONS) |
DESCRIPTION | WEIGHT (KG) |
|---|---|---|---|
| 1080 | 50 | 3-jaw puller only. (Cylinder, pump, hose, coupler, screw, and crank not included). | 86,7 |
| PACKAGES: | |||
| PH503 | 50 | 3-jaw puller (1080) with RT503 center-hole Power-Twin® cylinder, cylinder half coupler, P55 pump, 1,8 meter hose, hose half coupler, 1 5/8”- 5 1/2 x 722 mm long adjusting screw, and adjusting crank. | 130,0 |
Skid-ResistantHydraulicPullers
Inbuilt For One Man Operation
Slim tapered jaws for better gripping in tight spots
| Model | Output (Ton) | Spread (mm) | Max
Reach (mm) |
Ram stroke (mm) | Dimensions(mm) | Weight (Kg) | Packing size (cm) | |||||
| E | F | G | A | B | C | |||||||
| AHL-5S | 5 | 50-250 | 140 | 50 | 45 | 23 | 106 | 10 | 10 | 20 | 13.8 | 60×12×17 |
| AHL-10S | 10 | 50-300 | 170 | 60 | 56 | 26 | 97 | 10 | 10 | 20 | 15.1 | 57×18×16 |
| AHL-20S | 20 | 100-400 | 205 | 70 | 78 | 33 | 105 | 12 | 12 | 22.5 | 20.4 | 62×25×22 |
Our company is a distinguished exporter and supplier of Automatic Vehicle Hydraulic Puller in Telangana region. Its fully automatic hydraulic design makes it particularly popular and exclusive among other similar products in the market. The puller is available in 2-3 diverse designs tailored to client prerequisites. The alloy steel body delivers super high strength to accomplish sturdy construction work. It is generally used for dismantling large shafts.
Specifications
| Capacity | 50 |
|---|---|
| Main area | 64 |
| Pulling dept of main open | 651 |
| Max open | 1150 |
| Depth of max open | 559 |
| Overall length | 2590 |
| Regulation of pullar counter height | 450-1120 |
| Cylinder stroke | 337 |
| Source of power | 220 v/380 v |
We are one of the most eminent exporters and suppliers of a wide spectrum of Integral Hydraulic Puller in Telangana region. The offered puller is compact in design, light in weight, easy to carry and operate. It is least restricted by place and is extensively used by factory, repair stations etc. This three-jaw puller is available in 5-50 ton capacity and ensures fast, efficient and safe pulling.
Specifications
| Model | AHP-5 | AHP-10 | AHP-20 | AHP-30 | AHP-50 |
|---|---|---|---|---|---|
| Rated output | 5 | 10 | 20 | 30 | 50 |
| Max spread | 200 | 250 | 350 | 400 | 500 |
| Max stroke | 50 | 50 | 60 | 60 | 60 |
| Weight | 7.5 | 11 | 19 | 25 | 45 |
| Volume | (1/4) 440x38x32 | (1/2)44x21x36 | 43x40x14 | 48x20x18 | 52x25x22 |
Our company is one of the key exporters and suppliers of Adjustable Hydraulic Puller at most economic rates as per industry standards. The puller is well-recognised for its Safety cage jaw retention system as well as the adjustable jaw retention. Its high strength hydraulic structure allows easy pulling of large components. It is exceptionally user friendly and cost-effective since only a single person is needed for operation.
Specifications
| Model | Output (ton) | Max stroke (mm) | Claw number | Spread | Kg |
|---|---|---|---|---|---|
| apl-5 | 5 | 50 | 3 | 8-250 | 9 |
| apl-10 | 10 | 50 | 3 | 10-300 | 12 |
| apl-20 | 20 | 60 | 3 | 12-400 | 17 |
MG Road, Secunderabad, Telangana