Low Pressure Differential Gauge: Low Pressure Differential Gauge for pharma companies. Specifications: Customized: CustomizedPressure range: 0???1.5kPaAccuracy Grade: 0.1GMeasuring Medium: Steam

Sensocon usa mack differential pressure gauge we are one step ahead of our competitors in manufacturing and supplying a wide range of low cost sensocon differential pressure gauge. These premium quality products are manufactured using high-grade raw material, which is obtained from the most authentic and leading vendor in the market. Skilled professionals are hired to provide proper guidelines to our staff to manufacture high quality range of these products. The product is used for various purposes in different industries like filter status, duct static, pressure clean room pressure, building pressure, fan and blower pressure. specifications: accuracy 2%mounts in industrytype : arrow indicatordie cast aluminum housingstandard holestemperature : 20 to 140 f

Industrial Magnehelic Differential Pressure Gauges We are the leading manufacturer and exporter of a quality tested assortment of Industrial Magnehelic Gauges. Our range is widely used in checking the automatic valves and gas-air ratio controls, further in medical equipment also to monitor blood and respiratory pressures. Besides it is used to measure the fan and blow pressures, liquid levels and pressures in fluidic systems. Operated by a diaphragm our product is low in cost and is available in different specifications ranging from 0-10, 0-25, 0-40, 0-50, 0-100 MM Wc , and 0- 60 pA, 0-250 pA. Uses : Used for high accuracy-guaranteed within 2% of full scale and for the wide choice of 81 models available to suit your needs precisely. Specifications:Application: IndustrialIndicating Pressure Reference: Electric ContactFunction: Local Indication Type

We offer magnehelic differential pressure gauges which run on air and non-combustible compatible gases and are offered with the option of natural gas. In addition to this, these housing are fabricated by using die cast aluminum case and bezel, with acrylic cover. These have exterior finish with grey color to withstand 168 hour salt spray corrosion test. Specifications : Accuracy: 2% of full scale (3% on - 0, -100 Pa, -125 Pa, 10MM and 4% on - 00, -60 Pa, -6MM ranges), throughout range at 70F (21.1C).Pressure Limits: -20 Hg. to 15 psig. (-0.677 bar to 1.034 bar); MP option:HP option: 35 psig (2.41 bar), 80 psig (5.52 bar).Over pressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only.Temperature Limits: 20 to 140F.* (-6.67 to 60C).Size: 4 (101.6 mm) Diameter dial face.Mounting Orientation: Diaphragm in vertical position, Consult factory forProcess Connections: 18 female NPT duplicate high and low pressure taps one pair side and one pair back.Weight: 1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g).Other position orientations.

Winters Canada Digital Pressure Gauge DPG204

Winters 2-1/2 Inch Dial, 1/4 Inch NPT, 30-0-30 Scale Range Pressu.More details: 2-1/2 Inch Dial, 1/4 Inch NPT, 30-0-30 .

Descriptions

Winters 2-1/2 Inch Dial, 1/4 Inch NPT, 30-0-30 Scale Range Pressu.
More details: 2-1/2 Inch Dial, 1/4 Inch NPT, 30-0-30 Scale Range Pressure Gauge - Winters 2-1/2 Inch Dial, 1/4 Inch NPT, 30-0-30 Scale Range Pressu

Winters Canada Digital Pressure Gauge DPG207

DPG SERIES, 2.5" DIAL, 30"/0/150 PSI, ABS CASE, RUBBER BOOT, 1/4" NPT LM

APPLICATIONS:

Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

• Simple 2 button operation
• Reset to zero feature
• Backlight turns on when on/off button is pressed
• Option for display to remain continuously on
• Continuous Peak pressure indication option
• 316L welded diaphragm seal
• Rubber boot is standard
• ASME B40.100 compliant
• RoHS compliant
• +/- 1% accuracy (+-/ 0.5% optional for gauges up to 5, 000 psi)
• 1 year warranty

Winters Canada Digital Pressure Gauge DPG211

0/15 PSI DPG SERIES, 2.5" DIAL, 0/15 PSI, ABS CASE, RUBBER BOOT, 1/4" NPT LM DPG211

APPLICATIONS:

Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

• Simple 2 button operation
• Reset to zero feature
• Backlight turns on when on/off button is pressed
• Option for display to remain continuously on
• Continuous Peak pressure indication option
• 316L welded diaphragm seal
• Rubber boot is standard
• ASME B40.100 compliant
• RoHS compliant
• +/- 1% accuracy (+-/ 0.5% optional for gauges up to 5, 000 psi)
• 1 year warranty

.

.

winters canada digital pressure gauge dpg218

0/600 psi dpg series, 2.5" dial, 0/600 psi, abs case, rubber boot, 1/4" npt lm

applications:

ideal for commercial and industrial applications in both test measurement and general purpose installations

description & features:

• simple 2 button operation
• reset to zero feature
• backlight turns on when on/off button is pressed
• option for display to remain continuously on
• continuous peak pressure indication option
• 316l welded diaphragm seal
• rubber boot is standard
• asme b40.100 compliant
• rohs compliant
• +/- 1% accuracy (+-/ 0.5% optional for gauges up to 5, 000 psi)
• 1 year warranty

.

winters canada digital pressure gauge dpg220

0/1, 500 psi dpg series, 2.5" dial, 0/1500 psi, abs case, rubber boot, 1/4" npt lm

applications:
ideal for commercial and industrial applications in both test measurement and general purpose installations

description & features:

• simple 2 button operation
• reset to zero feature
• backlight turns on when on/off button is pressed
• option for display to remain continuously on
• continuous peak pressure indication option
• 316l welded diaphragm seal
• rubber boot is standard
• asme b40.100 compliant
• rohs compliant
• +/- 1% accuracy (+-/ 0.5% optional for gauges up to 5, 000 psi)
• 1 year warranty

.

winters canada digital pressure gauge dpg224

0/10, 000 psi dpg series, 2.5" dial, 0/10000 psi, abs case, rubber boot, 1/4" npt lm

applications:

ideal for commercial and industrial applications in both test measurement and general purpose installations

description & features:

• simple 2 button operation
• reset to zero feature
• backlight turns on when on/off button is pressed
• option for display to remain continuously on
• continuous peak pressure indication option
• 316l welded diaphragm seal
• rubber boot is standard
• asme b40.100 compliant
• rohs compliant
• +/- 1% accuracy (+-/ 0.5% optional for gauges up to 5, 000 psi)
• 1 year warranty

.

.

.

winters digital pressure gauge 1000 to 3000 mbar

mack - canada

model - dpg205r11

range - 1000 to 3000 mbar

product description:

winters dpg digital pressure gauge

applications:

ideal for commercial and industrial applications in both test measurement and general purpose installations

description & features:

simple 2 button operation

reset to zero feature

backlight turns on when on/off button is pressed

option for display to remain continuously on

continuous peak pressure indication option

316l welded diaphragm seal

rubber boot is standard

asme b40.100 compliant

rohs compliant

1% accuracy (0.5% optional for gauges up to 10, 000 psi)

1 year warranty

.

Winters Digital Pressure Gauge Model No DPG205R11

Mack - CANADA
Model - DPG205R11
Range - 1000 To 3000 mbar

Product Description:

WINTERS DPG DIGITAL PRESSURE GAUGE

APPLICATIONS:

• Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

• Simple 2 button operation
• Reset to zero feature
• Backlight turns on when on/off button is pressed
• Option for display to remain continuously on

• Continuous Peak pressure indication option
• 316L welded diaphragm seal
• Rubber boot is standard
• ASME B40.100 compliant
• RoHS compliant
• 1% accuracy (0.5% optional for gauges up to 10, 000 psi)
• 1 year warranty

.

.

Dwyer 2000-300PA Magnehelic Differential Pressure Gauge

Series 2000 Magnehelic Differential Pressure Gage, 0-300 Pa,

Minor Divisions 10.0

Indicate Positive, Negative or Differential

Select the Magnehelic gagefor high accuracy-guaranteed. Using Dwyer's simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too.

The Magnehelic gage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems. It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment.

Product Applications

• Filter Monitoring
• Air Velocity with Dwyer Pitot Tube
• Blower Vacuum Monitoring
• Fan Pressure Indication
• Duct, Room or Building Pressures
• Clean Room Positive Pressure Indication

Approvals

• RoHS Certificate
• GOST-R Certificate

Magnehelic GaugeHaving vast experience in the relevant industry, we are engaged in providing a broad assortment of Magnehelic Gauge that is assemble in order to meet specific demands of customers. Moreover, a series of quality tests is performed on offered gauge to ensure a defect free delivery at client's end. Clients can avail the offered range from us at market leading prices within stipulated time frame.Features:AccuracyHigh functionalityLong service life Specifications:We provide magnehelic gauge of series which is low in cost, diaphragm operated and differential pressure gaugeOwing to these features these are used in applications for measuring positive, negative, or differential pressure with an accuracy of 2%Besides, these are also applied for monitoring filter status, duct static pressure, room pressure, fan or blower pressure, paint booths, dust collectors, cabinet purging and many othersWe offer magnehelic differential pressure gauges which run on air and non-combustible compatible gases and are offered with the option of natural gasIn addition to this, these housing are fabricated by using die cast aluminum case and bezel, with acrylic coverThese have exterior finish with grey color to withstand 168 hour salt spray corrosion test Technical Specifications:

Very Low Differential Pressure GaugeFeatures: 4 Pressure Measurement from 6mmwc upto 100mmwc4 Dial Sizes 4-12 (115mm)4 Aluminium Case4 Accuracy +-2% FS.ApplicationsFilter StatusDuct Static PressureClean Room PressureBuilding PressureFan and Blower PressurePaint BoothsDust CollectorsGlove Box PressureBubbler SystemsCabinet Purging Specifications:Type: Inductive Pressure SensorFor: Strain Gauge Pressure TransmitterOutput Signal Type: Digital TypeMaterial: Metal

.

DIGITAL PRESSURE GAUGE AS 313 Description & Features:Simple 2 button operationReset to zero featureBacklight turns on when onoff button is pressedOption for display to remain continuously onPeak pressure indication option316L welded diaphragm sealRubber boot is standardASME B40.100 compliant1% accuracy (0.5% optional for gauges up to 5, 000 psi)1 year warrantyApplications:Ideal for commercial and industrial application in both test measurement and generalpurpose installations.Specifications :Case Size : 2.5 (63mm)Case Material : ABS (IP64)Rubber Boot : Silicone rubber (IP65)LCD Display : 2 x 34 (48mm x 16mm)Connection : 14 NPT 304SSSensor 316L welded, PiezoOperating Life : 1 million cyclesPower Supply : 2 x AAA battery (1.5V)Battery Life : 2 yrs (auto shut-off mode)Power Mode : Auto or manual shut-offDisplay Digits : 4 digits to 5, 000 psi5 digits for 10, 000 psi and 15, 000 psiResolution : 1 digitPressure Unit Selection : psi, mHO, mmHg, mbar, kPa ranges 100 psipsi, bar, kgcm, MPa, atm ranges ! 160 psiOperation Mode : Continuous process pressure reading or peak pressure readingResponse Time : 3 Hz display refresh rateProof Burst Pressure : 200% 300% FSOperating Storage Temperature : 14F to 122F (-10C to 50C)-4F to 167F (-20C to 75C)Accuracy : 1% (0.5% optional for gauges up to 5, 000 psi)

dwyer 2000-100pa magnehelic differential pressure gauge

series 2000 magnehelic differential pressure gage, 0-100 pa, minor divisions 2.0, vertical

indicate positive, negative or differential

select the magnehelic gagefor high accuracy-guaranteed. Using dwyer's simple, frictionless magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too.

the magnehelic gage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems. It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment.

product applications

• filter monitoring
• air velocity with dwyer pitot tube
• blower vacuum monitoring
• fan pressure indication
• duct, room or building pressures
• clean room positive pressure indication

We are offering Magnehelic Gauge Nozzles to our client. Features: Excellent air velocity monitoring efficiencyCompact designEasy to operate and maintain Specifications: Display: FlowmeterWeight: 0-100KgOil Cylinder Position: Na

dwyer 2000-500pa magnehelic differential pressure gauge

dwyer 2000-500pa magnehelic, differential pressure gauge, 0-500 pa

• precision litho-printed scale is accurate and easy to read.
• red tipped pointer of heat treated aluminum tubing is easy to see. It is rigidly mounted on the helix shaft.
• pointer stops of molded rubber prevent pointer over-travel without damage.
• "wishbone" assembly provides mounting for helix, helix bearings and pointer shaft.
• jeweled bearings are shock-resistant mounted; provide virtually friction-free motion for helix. Motion damped with high viscosity silicone fluid.
• zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness.
• helix is precision made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the magnetic field to move the pointer across the scale.
• samarium cobalt magnet mounted at one end of range spring rotates helix without mechanical linkages.
• calibrated range spring is flat spring steel. Small amplitude of motion assures consistency and long life. It reacts to pressure on diaphragm. Live length adjustable for calibration.
• silicone rubber diaphragm with integrally molded o-ring is supported by front and rear plates. It is locked and sealed in position with a sealing plate and retaining ring. Diaphragm motion is restricted to prevent damage due to overpressures.
• die cast aluminum case is precision made and iridite-dipped to withstand 168 hour salt spray corrosion test. Exterior finished in baked dark gray hammerloid. One case size is used for all standard pressure options, and for both surface and flush mounting.
• blowout plug of silicone rubber protects against overpressure on 15 psig rated models. Opens at approximately 25 psig.
• o-ring seal for cover assures pressure integrity of case.

We are one step ahead of our competitors in manufacturing and supplying a wide range of low cost sensocon differential pressure gauge. These premium quality products are manufactured using high-grade raw material, which is obtained from the most authentic and leading vendor in the market. Skilled professionals are hired to provide proper guidelines to our staff to manufacture high quality range of these products. The product is used for various purposes in different industries like filter status, duct static, pressure clean room pressure, building pressure, fan and blower pressure. specifications: accuracy 2%mounts in industrytype : arrow indicatordie cast aluminum housingstandard holestemperature : 20 to 140 f

Dwyer 2000-250PA Magnehelic Differential Pressure Gauge

Select the Magnehelic gage for high accuracy--guaranteed within 2% of full scale--and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too. The Magnehelic gage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems. It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment.

Order #: 2000-250PA

Mfg Part #: 2000-250PA

Capsuhelic Differential Pressure Gauge Series 4000 Capsuhelic Differential Pressure Gage Measures Pressure, Vacuum or Differential, Suitable for Internal Pressures to 500 psig. The SERIES 4000 Capsuhelic Gage is designed to give fast, accurate indication of differential pressures. The gauge may be used as a readout device when measuring flowing fluids, pressure drop across filters, liquid levels in storage tanks and many other applications involving pressure, vacuum or differential pressure. The pressure being measured is held within a capsule which is an integral part of the gauge. This containment of the pressure permits the use of the gage on system pressures of up to 500 psig, even when differentials to be read are less than 0.1 in w.c. Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi. Product Applications Fluid flowLiquid storage tanksFilter pressure dropsVacuum or differential pressure

We have in our stores a wide assortment of Minihelic II Differential Pressure Gauges. Designed especially for panel mounting in a single 2-38 diameter hole, these gauges come with small size and can easily be operated up to 30 psig pressure. These gauges are manufactured by us using superior quality raw material procured by the trusted vendors of the market in accordance to international quality standards. Features: Combining high accuracyCompactnessDependability Specifications:Indicating Pressure Reference: General Pressure GaugePressure range: 0-16kg 220psiAccuracy: 1.6

Capsuhelic Differential Pressure Gauge Series 4000 Capsuhelic Differential Pressure Gage Measures Pressure, Vacuum or Differential, Suitable for Internal Pressures to 500 psig. The SERIES 4000 Capsuhelic Gage is designed to give fast, accurate indication of differential pressures. The gauge may be used as a readout device when measuring flowing fluids, pressure drop across filters, liquid levels in storage tanks and many other applications involving pressure, vacuum or differential pressure. The pressure being measured is held within a capsule which is an integral part of the gauge. This containment of the pressure permits the use of the gage on system pressures of up to 500 psig, even when differentials to be read are less than 0.1 in w.c. Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.

We are here to offer magnehelic gauge with s.s. Enclosure. It is designed to calibrate a broad spectrum of instruments from moving coil meters to process control systems and retain its precision over long periods in wide environmental conditions. These are customized as per as needs of clients.Specifications: metal of construction s.s. 304dial size: 4"ranges: mmwc, inwc, pascalenclosure type: consul type & wall mountingfront panel: zero calibration gas selector switch optional available in different specifications ranging from: 0-10, 0-25, 0-40, 0-50, 0-100 mm wc , and0- 60 pa, 0-250 pa. Uses: used for high accuracy-guaranteed within 2% of full scale and for the wide choice of 81 models available to suit your needs precisely.

We are one of the topmost manufacturer, exporter and supplier of a superior quality range of ms box flesh type magnehelic gauge. These instruments are designed and made utilizing the finest grade raw material by following high definition engineering principles. Furthermore, these are widely appreciated for some of the salient features like accurate dimension, durability, superior performance and corrosion resistance. We provide these to our clients in both, standard and customized options according to the specific demands of customers. Specifications: type: limit gaugemeasurement object: depthmaterial: ps for cup, pp for ring

AT2605 ATEX Approved 605 Differential Pressure The ATEX approved Series AT2605 Indicating Transmitter provides for both visual monitoring and electronic control of very low differential pressure in hazardous locations. The easily read dial gage is complimented by the two-wire, 4 to 20 mA control signal utilizing the time-proven Dwyer Magnehelic gage mechanical design and Series 600 transmitter technology. The two-wire design simplifies any 4 to 20 mA control loop powered by a 10 to 35 VDC supply. Flame-proof ATEX enclosures are available in aluminum and can include a glass window for viewing process pressure on gage face. Important notes for installation: : Cables must be fitted through 12" NPT cable gland or ATEX conduit (not supplied with instrument), Open cover only after de-energizing instrument.

2-5000 Minihelic II Differential Pressure Gages Combining clean design, small size and low cost with enough accuracy for all but the most demanding applications our Minihelic II gage offers the latest in design features for a dial type differential pressure gage. It is our most compact gage but is easy to read and can safely operate at total pressures up to 30 psig. The Minihelic II gage is designed for panel mounting in a single 2-58" diameter hole. Standard pressure connections are barbed fittings for 316" ID tubing; optional 18" male NPT connections are also available. Over-pressure protection is built into the Minihelic II gage by means of a blow-out membrane molded in conjunction with the diaphragm. Accidental over-ranging up to the rated total pressure will not damage the gage. With removable lens and rear housing, the gage may be easily serviced at minimum cost. With the housing molded from mineral and glass filled nylon and the lens molded from acrylic, the gage will withstand rough use and exposure as well as high total pressure. The 5% accuracy and low cost of the Minihelic II gage make it well-suited for a wide variety of OEM and user applications. OEM applications include cabinet air purging, medical respiratory therapy equipment, air samplers, laminar flow hoods, and electronic air cooling systems. As an air filter gage, the Minihelic II gage finds many end use applications on large stationary engines, compressors, ventilators, and air handling units. The Minihelic II gage is suitable for many of the same applications as the Magnehelic gage where the greater accuracy, sensitivity, and higher and lower differential pressure ranges of the Magnehelic gage are not required. Product Applications: : Room Positive Pressure Sensing, Local Indication on Filter Status, Face Velocity on Fume Hood, Duct Pressures.

We are offering Differential Pressure Gauge Nozzles to our client. Features: Excellent air velocity monitoring efficiencyCompact designEasy to operate and maintain Specifications: Application Scene: Home GardeningShape: SquareSize: 12"-34"

We have in our stores a wide assortment of Minihelic II Differential Pressure Gauges. Designed especially for panel mounting in a single 2-38 diameter hole, these gauges come with small size and can easily be operated up to 30 psig pressure. These gauges are manufactured by us using superior quality raw material procured by the trusted vendors of the market in accordance to international quality standards. Features: Combining high accuracyCompactnessDependability Specifications:Indicating Pressure Reference: General Pressure GaugePressure range: 0-16kg 220psiAccuracy: 1.6

Baumer Make Pressure Gauges Specifications:Operating Temperature: -20C to +50CColor: SilverProtection: IP65

Backed by years of experience of this domain, we present clients with the premium quality of Differential Pressure Gage. Used for measurement of differential pressure, the pressure gauge is manufactured by using latest technology. In order to ensure high standards of quality, the Aerosense differential pressure gauge is procured from trusted vendors. Features: Excellent measurement accuracyEasy to useRequires less maintenance Specifications:Indicating Pressure Reference: Differential Pressure GaugeAmbient Temp.Range: -7 60 cWeight: 1 Lb. 2oz (510g)

Dwyer Digital Differential Pressure Gauge Monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. Specifications: Measuring Range: Medium-pressure GaugeAccuracy: 0.5Application: Industrial

Digital Differential Pressure Gauge - Series A2 The Series A2 digital differential pressure gauge is a patented microprocessor based digital pressure gage for positive, negative, and differential measurement designed to be a direct replacement for mechanical gauges. The Series A2 differential pressure gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the A2 is also available with 0.5% or 0.25% accuracy. The A2 digital differential pressure gauge also has an optional 4-20 mA output for applications requiring an output signal. The A2 features a bright " LED display and process arch, which gives the gauge improved readability and precision. The A2 digital differential pressure gauges also feature 5 user selectable engineering units including in. w.c., mm w.c., cm w.c., kPa, and Pa. The Series A2 offers an improved look, and performance compare to mechanical gauges.Customizing Options Available

Digital Differential Pressure Gauge - Series A1 The Series A1 Digital Differential Pressure Gauge is a patented microprocessor based digital pressure gage for positive, negative, and differential measurement designed to be a direct replacement for mechanical gauges. The Series A1 digital differential pressure gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the A1 is also available with 0.5% or 0.25% accuracy. The A1 pressure gauge also has an optional 4-20 mA output for applications requiring an output signal. The A1 features a bright " LED display, which gives the gauge improved readability and precision. The A1 digital differential pressure gauges also feature 5 user selectable engineering units including in. w.c., mm w.c., cm w.c., kPa, and Pa. The Series A1 offers an improved look, and performance compared to mechanical gauges.

Baumer Make Pressure Gauges Specifications:Operating Temperature: -20C to +50CColor: SilverProtection: IP65

dwyer 2000-125pa magnehelic differential pressure gauge

dwyer 2000-125pa magnehelic, differential pressure gauge, 0/125pa, vs

• precision litho-printed scale is accurate and easy to read.
• red tipped pointer of heat treated aluminum tubing is easy to see. It is rigidly mounted on the helix shaft.
• pointer stops of molded rubber prevent pointer over-travel without damage.
• "wishbone" assembly provides mounting for helix, helix bearings and pointer shaft.
• jeweled bearings are shock-resistant mounted; provide virtually friction-free motion for helix. Motion damped with high viscosity silicone fluid.
• zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness.
• helix is precision made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the magnetic field to move the pointer across the scale.
• samarium cobalt magnet mounted at one end of range spring rotates helix without mechanical linkages.
• calibrated range spring is flat spring steel. Small amplitude of motion assures consistency and long life. It reacts to pressure on diaphragm. Live length adjustable for calibration.
• silicone rubber diaphragm with integrally molded o-ring is supported by front and rear plates. It is locked and sealed in position with a sealing plate and retaining ring. Diaphragm motion is restricted to prevent damage due to overpressures.
• die cast aluminum case is precision made and iridite-dipped to withstand 168 hour salt spray corrosion test. Exterior finished in baked dark gray hammerloid. One case size is used for all standard pressure options, and for both surface and flush mounting.
• what's included with the dwyer 2000-125pa

Low Pressure Differential Gauge: Low Pressure Differential Gauge for pharma companies. Specifications: Customized: CustomizedPressure range: 0???1.5kPaAccuracy Grade: 0.1GMeasuring Medium: Steam

Sensocon usa mack differential pressure gauge we are one step ahead of our competitors in manufacturing and supplying a wide range of low cost sensocon differential pressure gauge. These premium quality products are manufactured using high-grade raw material, which is obtained from the most authentic and leading vendor in the market. Skilled professionals are hired to provide proper guidelines to our staff to manufacture high quality range of these products. The product is used for various purposes in different industries like filter status, duct static, pressure clean room pressure, building pressure, fan and blower pressure. specifications: accuracy 2%mounts in industrytype : arrow indicatordie cast aluminum housingstandard holestemperature : 20 to 140 f

Industrial Magnehelic Differential Pressure Gauges We are the leading manufacturer and exporter of a quality tested assortment of Industrial Magnehelic Gauges. Our range is widely used in checking the automatic valves and gas-air ratio controls, further in medical equipment also to monitor blood and respiratory pressures. Besides it is used to measure the fan and blow pressures, liquid levels and pressures in fluidic systems. Operated by a diaphragm our product is low in cost and is available in different specifications ranging from 0-10, 0-25, 0-40, 0-50, 0-100 MM Wc , and 0- 60 pA, 0-250 pA. Uses : Used for high accuracy-guaranteed within 2% of full scale and for the wide choice of 81 models available to suit your needs precisely. Specifications:Application: IndustrialIndicating Pressure Reference: Electric ContactFunction: Local Indication Type

We offer magnehelic differential pressure gauges which run on air and non-combustible compatible gases and are offered with the option of natural gas. In addition to this, these housing are fabricated by using die cast aluminum case and bezel, with acrylic cover. These have exterior finish with grey color to withstand 168 hour salt spray corrosion test. Specifications : Accuracy: 2% of full scale (3% on - 0, -100 Pa, -125 Pa, 10MM and 4% on - 00, -60 Pa, -6MM ranges), throughout range at 70F (21.1C).Pressure Limits: -20 Hg. to 15 psig. (-0.677 bar to 1.034 bar); MP option:HP option: 35 psig (2.41 bar), 80 psig (5.52 bar).Over pressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only.Temperature Limits: 20 to 140F.* (-6.67 to 60C).Size: 4 (101.6 mm) Diameter dial face.Mounting Orientation: Diaphragm in vertical position, Consult factory forProcess Connections: 18 female NPT duplicate high and low pressure taps one pair side and one pair back.Weight: 1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g).Other position orientations.

Winters Canada Digital Pressure Gauge DPG204

Winters 2-1/2 Inch Dial, 1/4 Inch NPT, 30-0-30 Scale Range Pressu.More details: 2-1/2 Inch Dial, 1/4 Inch NPT, 30-0-30 .

Descriptions

Winters 2-1/2 Inch Dial, 1/4 Inch NPT, 30-0-30 Scale Range Pressu.
More details: 2-1/2 Inch Dial, 1/4 Inch NPT, 30-0-30 Scale Range Pressure Gauge - Winters 2-1/2 Inch Dial, 1/4 Inch NPT, 30-0-30 Scale Range Pressu

Winters Canada Digital Pressure Gauge DPG207

DPG SERIES, 2.5" DIAL, 30"/0/150 PSI, ABS CASE, RUBBER BOOT, 1/4" NPT LM

APPLICATIONS:

Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

• Simple 2 button operation
• Reset to zero feature
• Backlight turns on when on/off button is pressed
• Option for display to remain continuously on
• Continuous Peak pressure indication option
• 316L welded diaphragm seal
• Rubber boot is standard
• ASME B40.100 compliant
• RoHS compliant
• +/- 1% accuracy (+-/ 0.5% optional for gauges up to 5, 000 psi)
• 1 year warranty

Winters Canada Digital Pressure Gauge DPG211

0/15 PSI DPG SERIES, 2.5" DIAL, 0/15 PSI, ABS CASE, RUBBER BOOT, 1/4" NPT LM DPG211

APPLICATIONS:

Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

• Simple 2 button operation
• Reset to zero feature
• Backlight turns on when on/off button is pressed
• Option for display to remain continuously on
• Continuous Peak pressure indication option
• 316L welded diaphragm seal
• Rubber boot is standard
• ASME B40.100 compliant
• RoHS compliant
• +/- 1% accuracy (+-/ 0.5% optional for gauges up to 5, 000 psi)
• 1 year warranty

.

.

winters canada digital pressure gauge dpg218

0/600 psi dpg series, 2.5" dial, 0/600 psi, abs case, rubber boot, 1/4" npt lm

applications:

ideal for commercial and industrial applications in both test measurement and general purpose installations

description & features:

• simple 2 button operation
• reset to zero feature
• backlight turns on when on/off button is pressed
• option for display to remain continuously on
• continuous peak pressure indication option
• 316l welded diaphragm seal
• rubber boot is standard
• asme b40.100 compliant
• rohs compliant
• +/- 1% accuracy (+-/ 0.5% optional for gauges up to 5, 000 psi)
• 1 year warranty

.

winters canada digital pressure gauge dpg220

0/1, 500 psi dpg series, 2.5" dial, 0/1500 psi, abs case, rubber boot, 1/4" npt lm

applications:
ideal for commercial and industrial applications in both test measurement and general purpose installations

description & features:

• simple 2 button operation
• reset to zero feature
• backlight turns on when on/off button is pressed
• option for display to remain continuously on
• continuous peak pressure indication option
• 316l welded diaphragm seal
• rubber boot is standard
• asme b40.100 compliant
• rohs compliant
• +/- 1% accuracy (+-/ 0.5% optional for gauges up to 5, 000 psi)
• 1 year warranty

.

winters canada digital pressure gauge dpg224

0/10, 000 psi dpg series, 2.5" dial, 0/10000 psi, abs case, rubber boot, 1/4" npt lm

applications:

ideal for commercial and industrial applications in both test measurement and general purpose installations

description & features:

• simple 2 button operation
• reset to zero feature
• backlight turns on when on/off button is pressed
• option for display to remain continuously on
• continuous peak pressure indication option
• 316l welded diaphragm seal
• rubber boot is standard
• asme b40.100 compliant
• rohs compliant
• +/- 1% accuracy (+-/ 0.5% optional for gauges up to 5, 000 psi)
• 1 year warranty

.

.

.

winters digital pressure gauge 1000 to 3000 mbar

mack - canada

model - dpg205r11

range - 1000 to 3000 mbar

product description:

winters dpg digital pressure gauge

applications:

ideal for commercial and industrial applications in both test measurement and general purpose installations

description & features:

simple 2 button operation

reset to zero feature

backlight turns on when on/off button is pressed

option for display to remain continuously on

continuous peak pressure indication option

316l welded diaphragm seal

rubber boot is standard

asme b40.100 compliant

rohs compliant

1% accuracy (0.5% optional for gauges up to 10, 000 psi)

1 year warranty

.

Winters Digital Pressure Gauge Model No DPG205R11

Mack - CANADA
Model - DPG205R11
Range - 1000 To 3000 mbar

Product Description:

WINTERS DPG DIGITAL PRESSURE GAUGE

APPLICATIONS:

• Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

• Simple 2 button operation
• Reset to zero feature
• Backlight turns on when on/off button is pressed
• Option for display to remain continuously on

• Continuous Peak pressure indication option
• 316L welded diaphragm seal
• Rubber boot is standard
• ASME B40.100 compliant
• RoHS compliant
• 1% accuracy (0.5% optional for gauges up to 10, 000 psi)
• 1 year warranty

.

.

Dwyer 2000-300PA Magnehelic Differential Pressure Gauge

Series 2000 Magnehelic Differential Pressure Gage, 0-300 Pa,

Minor Divisions 10.0

Indicate Positive, Negative or Differential

Select the Magnehelic gagefor high accuracy-guaranteed. Using Dwyer's simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too.

The Magnehelic gage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems. It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment.

Product Applications

• Filter Monitoring
• Air Velocity with Dwyer Pitot Tube
• Blower Vacuum Monitoring
• Fan Pressure Indication
• Duct, Room or Building Pressures
• Clean Room Positive Pressure Indication

Approvals

• RoHS Certificate
• GOST-R Certificate

Magnehelic GaugeHaving vast experience in the relevant industry, we are engaged in providing a broad assortment of Magnehelic Gauge that is assemble in order to meet specific demands of customers. Moreover, a series of quality tests is performed on offered gauge to ensure a defect free delivery at client's end. Clients can avail the offered range from us at market leading prices within stipulated time frame.Features:AccuracyHigh functionalityLong service life Specifications:We provide magnehelic gauge of series which is low in cost, diaphragm operated and differential pressure gaugeOwing to these features these are used in applications for measuring positive, negative, or differential pressure with an accuracy of 2%Besides, these are also applied for monitoring filter status, duct static pressure, room pressure, fan or blower pressure, paint booths, dust collectors, cabinet purging and many othersWe offer magnehelic differential pressure gauges which run on air and non-combustible compatible gases and are offered with the option of natural gasIn addition to this, these housing are fabricated by using die cast aluminum case and bezel, with acrylic coverThese have exterior finish with grey color to withstand 168 hour salt spray corrosion test Technical Specifications:

Very Low Differential Pressure GaugeFeatures: 4 Pressure Measurement from 6mmwc upto 100mmwc4 Dial Sizes 4-12 (115mm)4 Aluminium Case4 Accuracy +-2% FS.ApplicationsFilter StatusDuct Static PressureClean Room PressureBuilding PressureFan and Blower PressurePaint BoothsDust CollectorsGlove Box PressureBubbler SystemsCabinet Purging Specifications:Type: Inductive Pressure SensorFor: Strain Gauge Pressure TransmitterOutput Signal Type: Digital TypeMaterial: Metal

.

DIGITAL PRESSURE GAUGE AS 313 Description & Features:Simple 2 button operationReset to zero featureBacklight turns on when onoff button is pressedOption for display to remain continuously onPeak pressure indication option316L welded diaphragm sealRubber boot is standardASME B40.100 compliant1% accuracy (0.5% optional for gauges up to 5, 000 psi)1 year warrantyApplications:Ideal for commercial and industrial application in both test measurement and generalpurpose installations.Specifications :Case Size : 2.5 (63mm)Case Material : ABS (IP64)Rubber Boot : Silicone rubber (IP65)LCD Display : 2 x 34 (48mm x 16mm)Connection : 14 NPT 304SSSensor 316L welded, PiezoOperating Life : 1 million cyclesPower Supply : 2 x AAA battery (1.5V)Battery Life : 2 yrs (auto shut-off mode)Power Mode : Auto or manual shut-offDisplay Digits : 4 digits to 5, 000 psi5 digits for 10, 000 psi and 15, 000 psiResolution : 1 digitPressure Unit Selection : psi, mHO, mmHg, mbar, kPa ranges 100 psipsi, bar, kgcm, MPa, atm ranges ! 160 psiOperation Mode : Continuous process pressure reading or peak pressure readingResponse Time : 3 Hz display refresh rateProof Burst Pressure : 200% 300% FSOperating Storage Temperature : 14F to 122F (-10C to 50C)-4F to 167F (-20C to 75C)Accuracy : 1% (0.5% optional for gauges up to 5, 000 psi)

dwyer 2000-100pa magnehelic differential pressure gauge

series 2000 magnehelic differential pressure gage, 0-100 pa, minor divisions 2.0, vertical

indicate positive, negative or differential

select the magnehelic gagefor high accuracy-guaranteed. Using dwyer's simple, frictionless magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too.

the magnehelic gage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems. It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment.

product applications

• filter monitoring
• air velocity with dwyer pitot tube
• blower vacuum monitoring
• fan pressure indication
• duct, room or building pressures
• clean room positive pressure indication

We are offering Magnehelic Gauge Nozzles to our client. Features: Excellent air velocity monitoring efficiencyCompact designEasy to operate and maintain Specifications: Display: FlowmeterWeight: 0-100KgOil Cylinder Position: Na

dwyer 2000-500pa magnehelic differential pressure gauge

dwyer 2000-500pa magnehelic, differential pressure gauge, 0-500 pa

• precision litho-printed scale is accurate and easy to read.
• red tipped pointer of heat treated aluminum tubing is easy to see. It is rigidly mounted on the helix shaft.
• pointer stops of molded rubber prevent pointer over-travel without damage.
• "wishbone" assembly provides mounting for helix, helix bearings and pointer shaft.
• jeweled bearings are shock-resistant mounted; provide virtually friction-free motion for helix. Motion damped with high viscosity silicone fluid.
• zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness.
• helix is precision made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the magnetic field to move the pointer across the scale.
• samarium cobalt magnet mounted at one end of range spring rotates helix without mechanical linkages.
• calibrated range spring is flat spring steel. Small amplitude of motion assures consistency and long life. It reacts to pressure on diaphragm. Live length adjustable for calibration.
• silicone rubber diaphragm with integrally molded o-ring is supported by front and rear plates. It is locked and sealed in position with a sealing plate and retaining ring. Diaphragm motion is restricted to prevent damage due to overpressures.
• die cast aluminum case is precision made and iridite-dipped to withstand 168 hour salt spray corrosion test. Exterior finished in baked dark gray hammerloid. One case size is used for all standard pressure options, and for both surface and flush mounting.
• blowout plug of silicone rubber protects against overpressure on 15 psig rated models. Opens at approximately 25 psig.
• o-ring seal for cover assures pressure integrity of case.

We are one step ahead of our competitors in manufacturing and supplying a wide range of low cost sensocon differential pressure gauge. These premium quality products are manufactured using high-grade raw material, which is obtained from the most authentic and leading vendor in the market. Skilled professionals are hired to provide proper guidelines to our staff to manufacture high quality range of these products. The product is used for various purposes in different industries like filter status, duct static, pressure clean room pressure, building pressure, fan and blower pressure. specifications: accuracy 2%mounts in industrytype : arrow indicatordie cast aluminum housingstandard holestemperature : 20 to 140 f

Dwyer 2000-250PA Magnehelic Differential Pressure Gauge

Select the Magnehelic gage for high accuracy--guaranteed within 2% of full scale--and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too. The Magnehelic gage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems. It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment.

Order #: 2000-250PA

Mfg Part #: 2000-250PA

Capsuhelic Differential Pressure Gauge Series 4000 Capsuhelic Differential Pressure Gage Measures Pressure, Vacuum or Differential, Suitable for Internal Pressures to 500 psig. The SERIES 4000 Capsuhelic Gage is designed to give fast, accurate indication of differential pressures. The gauge may be used as a readout device when measuring flowing fluids, pressure drop across filters, liquid levels in storage tanks and many other applications involving pressure, vacuum or differential pressure. The pressure being measured is held within a capsule which is an integral part of the gauge. This containment of the pressure permits the use of the gage on system pressures of up to 500 psig, even when differentials to be read are less than 0.1 in w.c. Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi. Product Applications Fluid flowLiquid storage tanksFilter pressure dropsVacuum or differential pressure

We have in our stores a wide assortment of Minihelic II Differential Pressure Gauges. Designed especially for panel mounting in a single 2-38 diameter hole, these gauges come with small size and can easily be operated up to 30 psig pressure. These gauges are manufactured by us using superior quality raw material procured by the trusted vendors of the market in accordance to international quality standards. Features: Combining high accuracyCompactnessDependability Specifications:Indicating Pressure Reference: General Pressure GaugePressure range: 0-16kg 220psiAccuracy: 1.6

Capsuhelic Differential Pressure Gauge Series 4000 Capsuhelic Differential Pressure Gage Measures Pressure, Vacuum or Differential, Suitable for Internal Pressures to 500 psig. The SERIES 4000 Capsuhelic Gage is designed to give fast, accurate indication of differential pressures. The gauge may be used as a readout device when measuring flowing fluids, pressure drop across filters, liquid levels in storage tanks and many other applications involving pressure, vacuum or differential pressure. The pressure being measured is held within a capsule which is an integral part of the gauge. This containment of the pressure permits the use of the gage on system pressures of up to 500 psig, even when differentials to be read are less than 0.1 in w.c. Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.

We are here to offer magnehelic gauge with s.s. Enclosure. It is designed to calibrate a broad spectrum of instruments from moving coil meters to process control systems and retain its precision over long periods in wide environmental conditions. These are customized as per as needs of clients.Specifications: metal of construction s.s. 304dial size: 4"ranges: mmwc, inwc, pascalenclosure type: consul type & wall mountingfront panel: zero calibration gas selector switch optional available in different specifications ranging from: 0-10, 0-25, 0-40, 0-50, 0-100 mm wc , and0- 60 pa, 0-250 pa. Uses: used for high accuracy-guaranteed within 2% of full scale and for the wide choice of 81 models available to suit your needs precisely.

We are one of the topmost manufacturer, exporter and supplier of a superior quality range of ms box flesh type magnehelic gauge. These instruments are designed and made utilizing the finest grade raw material by following high definition engineering principles. Furthermore, these are widely appreciated for some of the salient features like accurate dimension, durability, superior performance and corrosion resistance. We provide these to our clients in both, standard and customized options according to the specific demands of customers. Specifications: type: limit gaugemeasurement object: depthmaterial: ps for cup, pp for ring

AT2605 ATEX Approved 605 Differential Pressure The ATEX approved Series AT2605 Indicating Transmitter provides for both visual monitoring and electronic control of very low differential pressure in hazardous locations. The easily read dial gage is complimented by the two-wire, 4 to 20 mA control signal utilizing the time-proven Dwyer Magnehelic gage mechanical design and Series 600 transmitter technology. The two-wire design simplifies any 4 to 20 mA control loop powered by a 10 to 35 VDC supply. Flame-proof ATEX enclosures are available in aluminum and can include a glass window for viewing process pressure on gage face. Important notes for installation: : Cables must be fitted through 12" NPT cable gland or ATEX conduit (not supplied with instrument), Open cover only after de-energizing instrument.

2-5000 Minihelic II Differential Pressure Gages Combining clean design, small size and low cost with enough accuracy for all but the most demanding applications our Minihelic II gage offers the latest in design features for a dial type differential pressure gage. It is our most compact gage but is easy to read and can safely operate at total pressures up to 30 psig. The Minihelic II gage is designed for panel mounting in a single 2-58" diameter hole. Standard pressure connections are barbed fittings for 316" ID tubing; optional 18" male NPT connections are also available. Over-pressure protection is built into the Minihelic II gage by means of a blow-out membrane molded in conjunction with the diaphragm. Accidental over-ranging up to the rated total pressure will not damage the gage. With removable lens and rear housing, the gage may be easily serviced at minimum cost. With the housing molded from mineral and glass filled nylon and the lens molded from acrylic, the gage will withstand rough use and exposure as well as high total pressure. The 5% accuracy and low cost of the Minihelic II gage make it well-suited for a wide variety of OEM and user applications. OEM applications include cabinet air purging, medical respiratory therapy equipment, air samplers, laminar flow hoods, and electronic air cooling systems. As an air filter gage, the Minihelic II gage finds many end use applications on large stationary engines, compressors, ventilators, and air handling units. The Minihelic II gage is suitable for many of the same applications as the Magnehelic gage where the greater accuracy, sensitivity, and higher and lower differential pressure ranges of the Magnehelic gage are not required. Product Applications: : Room Positive Pressure Sensing, Local Indication on Filter Status, Face Velocity on Fume Hood, Duct Pressures.

We are offering Differential Pressure Gauge Nozzles to our client. Features: Excellent air velocity monitoring efficiencyCompact designEasy to operate and maintain Specifications: Application Scene: Home GardeningShape: SquareSize: 12"-34"

We have in our stores a wide assortment of Minihelic II Differential Pressure Gauges. Designed especially for panel mounting in a single 2-38 diameter hole, these gauges come with small size and can easily be operated up to 30 psig pressure. These gauges are manufactured by us using superior quality raw material procured by the trusted vendors of the market in accordance to international quality standards. Features: Combining high accuracyCompactnessDependability Specifications:Indicating Pressure Reference: General Pressure GaugePressure range: 0-16kg 220psiAccuracy: 1.6

Baumer Make Pressure Gauges Specifications:Operating Temperature: -20C to +50CColor: SilverProtection: IP65

Backed by years of experience of this domain, we present clients with the premium quality of Differential Pressure Gage. Used for measurement of differential pressure, the pressure gauge is manufactured by using latest technology. In order to ensure high standards of quality, the Aerosense differential pressure gauge is procured from trusted vendors. Features: Excellent measurement accuracyEasy to useRequires less maintenance Specifications:Indicating Pressure Reference: Differential Pressure GaugeAmbient Temp.Range: -7 60 cWeight: 1 Lb. 2oz (510g)

Dwyer Digital Differential Pressure Gauge Monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. Specifications: Measuring Range: Medium-pressure GaugeAccuracy: 0.5Application: Industrial

Digital Differential Pressure Gauge - Series A2 The Series A2 digital differential pressure gauge is a patented microprocessor based digital pressure gage for positive, negative, and differential measurement designed to be a direct replacement for mechanical gauges. The Series A2 differential pressure gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the A2 is also available with 0.5% or 0.25% accuracy. The A2 digital differential pressure gauge also has an optional 4-20 mA output for applications requiring an output signal. The A2 features a bright " LED display and process arch, which gives the gauge improved readability and precision. The A2 digital differential pressure gauges also feature 5 user selectable engineering units including in. w.c., mm w.c., cm w.c., kPa, and Pa. The Series A2 offers an improved look, and performance compare to mechanical gauges.Customizing Options Available

Digital Differential Pressure Gauge - Series A1 The Series A1 Digital Differential Pressure Gauge is a patented microprocessor based digital pressure gage for positive, negative, and differential measurement designed to be a direct replacement for mechanical gauges. The Series A1 digital differential pressure gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the A1 is also available with 0.5% or 0.25% accuracy. The A1 pressure gauge also has an optional 4-20 mA output for applications requiring an output signal. The A1 features a bright " LED display, which gives the gauge improved readability and precision. The A1 digital differential pressure gauges also feature 5 user selectable engineering units including in. w.c., mm w.c., cm w.c., kPa, and Pa. The Series A1 offers an improved look, and performance compared to mechanical gauges.

Baumer Make Pressure Gauges Specifications:Operating Temperature: -20C to +50CColor: SilverProtection: IP65

dwyer 2000-125pa magnehelic differential pressure gauge

dwyer 2000-125pa magnehelic, differential pressure gauge, 0/125pa, vs

• precision litho-printed scale is accurate and easy to read.
• red tipped pointer of heat treated aluminum tubing is easy to see. It is rigidly mounted on the helix shaft.
• pointer stops of molded rubber prevent pointer over-travel without damage.
• "wishbone" assembly provides mounting for helix, helix bearings and pointer shaft.
• jeweled bearings are shock-resistant mounted; provide virtually friction-free motion for helix. Motion damped with high viscosity silicone fluid.
• zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness.
• helix is precision made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the magnetic field to move the pointer across the scale.
• samarium cobalt magnet mounted at one end of range spring rotates helix without mechanical linkages.
• calibrated range spring is flat spring steel. Small amplitude of motion assures consistency and long life. It reacts to pressure on diaphragm. Live length adjustable for calibration.
• silicone rubber diaphragm with integrally molded o-ring is supported by front and rear plates. It is locked and sealed in position with a sealing plate and retaining ring. Diaphragm motion is restricted to prevent damage due to overpressures.
• die cast aluminum case is precision made and iridite-dipped to withstand 168 hour salt spray corrosion test. Exterior finished in baked dark gray hammerloid. One case size is used for all standard pressure options, and for both surface and flush mounting.
• what's included with the dwyer 2000-125pa