Write a Review
Our Products
Clamps
1 Products availableRailway, Railroad & Train Components
1 Products availableLathe Machines
1 Products availableInsulators And Insulation Materials
1 Products availableClamps And Clamping Equipment
1 Products availableWire Making Machines
1 Products availableLeading Manufacturer, Supplier & Retailer of shock absorbing system and Down Shop Lead System.
| This range of trolleys offers a simple and cost effective solution for Pendant trolleys and control cables. Features: |
| Medium Duty I-Beam Festoon Systems are well suited for large indoor or outdoor applications and are available for both Round and Flat cable. Features: >Maximum Load 70-80kg >Speed 60m/min >Operating Temperature -30C to 90C |
| INSUTECH Heavy Duty I-Beam can handle most rugged industrial application such a port container cranes, steel mill cranes, bulk material handling conveyor system. |
Shock Absorbing System employs the concept of absorbing the force
of an impact of the object being hit. The common theme employed by the spring buffers of INSUTECH is the concept that, if this force can be channeled into and absorbed by a safety barrier then less damage will
be done to the objects involved.
This means that safety barriers must be more than just visible reminders of potential danger. They must be engineered to withstand the likely specific danger in any given situation.
The INSTECH Spring Buffers can be used for crane as small as 1 ton
to cranes with a capacity of 500 tons and above. The compression thus obtained can be as varied as from 55mm to 350mm.
The INSUTECH Buffers are ideally suited where larger and continues impacts are in existence.
The exceptional quality of the buffers is acknowledged by its customers and the system which it has pioneered from past 30 years in the market of Crane OEM, Steel Plants, Material Handling Industry.
The buffers are thus manufactured and designed to protect people, machines and equipments from forces generated either during normal operations or from operational errors.
The spring buffer has been through compression test, chemical tests and other tests required as per the industry standards with very good results.
| Insutech Rail Clamps are flexible crane rail clip which are designed and manufactured to fix the largest rails in the most strenuous and demanding applications. It is ideally used for travelling Rails of EOT Cranes. Insutech offers wide range of the clamps like Cup type, Channel type, Flat type, Angle type. FEATURES >The designs have been used successfully used for many years throughout the world. >The pad is welded to the rail support structure, no access is required from below. >The two main parts are locked together on tightening by Nuts & Bolts. >A special Synthetic rubber member applies a adequate force to the rail which can be made on request. >Insutech offers wide range of the clamps which can be used for30lbs, 45lbs, 60 lbs, 90 lbs, CR80 CR100, CR120 etc to name a few. |
The Rail Pad is a device which is mounted beneath the Rails of the Crane or any locomotive which moves on that Rail.
The outer walls of the Rail Pad are rubberized while MS Strip is sandwiched between the two walls of rubber material.
FEATURES
>These Rail Pads are specifically designed for the Crane Rail which provides leveled ground for the installation for the Rail.
>The Rail Pads results in less noise due to vibration
>Reduces stress on lower surface of the Rail and helps increases the life of the Rail.
>Acts as Shock absorber for the wheels of the Crane, thus improves the life and reduces maintenance of the Wheels.
>Usability in wide range of temperatures.
>They are manufactured with resistant to wear and tear.
| The Down Shop Lead System are power feeder system for cranes. Initially bare copper wires were used for the entire length of crane, but as the crane capacity increased there was a requirement for a more sturdy design which would be able to take current as high as 3000 Amps and would work efficiently in dusty and rusty environment and in Class4 working conditions. |
| Insutech offers complete Conventional DSL System which generally comprises of Indian Standard Angle (ISA) or Rails, Brackets, Current Collectors Assemblies, Copper Expansion Compensator, Power Feed Clamp, Control Clamp. |
| Insutech PVC Insulated Conductor system is modern power supply system made up of single pole conductor rail used in mobile machines. The system is designed as finger safe in line with International Practices.The basic application includes Monorails, Travelling Cranes amusement park etc. |
| Festoon Systems are used for Cross Travel in the EOT Cranes.The function of Festoon System is to feed power to a moving machine. Insutech offers a wide range of the System which includes ClosedC-Track, I-beam based Light Medium & Heavy duty, Insulated trolleys etc. |
INSUTECH stretched wire system is ideally suited for light duty, light weight applications. It is best suited for hoists, jib cranes.
Features:
>Trolleys suited for flat cable, round cable or hose.
>Speed 60m/min
>Operating Temperature: -10C to 70C
Insu Tech Corporation (Insu Tech Corporation)
G - 1, N.J.IND. ESTATE, Chinch Pada, Gokhivare Village, Vasai (E), Dist. ,, Thane, Maharashtra
Share us via
