Instrutech Solutions

Kovilambakkam, Chennai, Tamil Nadu

Level cum Temperature switch is capable of measuring both, level as well as temperature of a liquid in a tank. It is a combination of an Float guided level switch(FGS) and RTD. FGS is capable of performing switching action which can be extended up to 3 meters. Whereas, the temperature sensor is an RTD whose temperature range is  up to 150 C.

Trumen LFV Vibrating Fork Level liquid level switch used in all liquids, It detects the point level switching measurements reliably. for all liquids, independent level switch and it detects. LFV level switch is used as protection device of Hi and Low level switching in liquid applications. This level switch can be used as empty or full detection, dry run and pump protection in tanks and pipelines. This device can also be used in hazardous areas, chemical and food industry.

Trumen LSVR is a vibrating rod level switch used in free-flowing powders and granules size upto max. 25 mm. This vibrating rod is ideally for solids and low bulk density materials. It detects the point level switch measurement reliably. LSVR level switch is used as protection device of Hi and Low level switching in solid applications. This vibrating rod level switch avoids blocking of bulk solid material and this rod is easy to clean.

Trumen LSV is a vibrating fork level switch used in free-flowing powders and granules size upto max. 10 mm. This vibrating fork is ideally for solids and low bulk density materials. It detects the point level switch measurement reliably. LSV level switch is used as protection device of Hi and Low level switching in solid applications.

Float level switch with mercury free microswitch can be used for the level switching of water and water based solutions. The float is hermetically sealed due to double chamber and its unique moulding process. Switch differential is set with the help of the counter weight that can be adjusted along the cable of the switch.

Our conductivity based level switches and sensors sense the level of water or other conductive liquids that have free ions. These conductivity level switches offer a wide range of customization options to meet any application’s needs. They are designed to control the level of all conductive service mediums, offering up to 4 different points of level monitoring and control.

Details

• Suitable for- Float Guided Level Switch, Rotary Paddle Switch, Displacer Level Switch, Cable Float Switch
• 1, 2, 3 or 4 setpoints
• User settable relay latching (Through DIP switch)
• Relay status indication through LEDs
• 85265 V AC SMPS
• User friendly operation

Float guided level switch is a most reliable instrument to sense the liquid level in the industry. It can be used with PLC, DCS,  SCADA.
Top mounted level switches work on permanent magnet reed switch basis.The float has a magnetic mechanism within it and moves freely along the guide tube, which contains glass encapsulated hermetically sealed reed switches, located at preset positions. Mounted vertically, these float follows liquid level and magnetically actuates reed swith at preset positions to give a change over contact. Single / multiple switching is effected through single or multiple floats as required by application.

Trumen RF Admittance type level switch suitable for Sticky solid and semi solid materials. This level switch has been designed specifically for Packaging Industries, Material Handling Industries. This level switch also used in slurries stored in open or closed tanks