Instrutech Solutions

Kovilambakkam, Chennai, Tamil Nadu

These extractive gas analyzers can be used in a large number of applications. The extractive measurement technology extracts a partial gas flow from the gas duct, conditions the extracted gas and feeds it to an analyzer module under constant conditions. We offer from gas sampling and conditioning right through to the numerous analyzer modules – is perfectly tailored to the measurement task concerned.

Innovative measurement technology that allows the devices to be mounted directly at the measurement site: In-situ gas analyzers take measurements directly within the process under system conditions. These analyzers are primarily characterized by their minimal maintenance requirements and extremely short response times. In-situ gas analyzers are available in two different versions:

• The cross-duct version for representative measurement results across the entire duct diameter
• The measuring probe version, optimized for single-sided gas duct installation

We offer portable Oxygen Analyzer are designed for accurate and reliable measurement of Oxygen in Air, Nitrogen, Argon, Hydrogen etc. These portable oxygen analyzer are based on : Electro chemical Oxygen Sensors, and provide fast response. They require no periodic maintenance like replacing electrodes or electrolyte and can be calibrated using ambient air or standard calibration gas. A digital display provides direct percentage / readout. The power Source is a 9V battery. low power consumption for long battery life. Model PGAOC - 100 is an Oxygen Monitor for general applications. low Oxygen set alarm facility which is usually preset to 19.0% intended for personal safety usage and warns if Oxygen level falls below acceptable to human system.

The BGA - TCD is a Thermal Conductivity based Gas Analyzers used to measure and monitor binary gas streams. It can also monitor one component in a more complex gas mixture when the background gases have the same ratio to each other, or have similar thermal conductivity values.

Specifications

• 0 to 100.0% Resolution 0.1% (For Ar./N2 - N2 in Argon) (Ar/H2)
• 0 to 100.0% Resolution 0.1% (For Ar./CO2 - CO2 in Argon) (Calibration gas required near sample gas)
• Online operation only (not for CO2 pressurized liquid mixture in gas cylinder)

Testo 320 flue gas analyser aids you in measurements in and around heating systems like radiators, burners, etc with only one measuring device.High-resolution colour graphic display with quick and easy menu structureStorage space for 500 measurement values

• Measurement of flue gas, draught, pressure, ambient CO, differential temperature and gas leak detection
• O2 and CO sensor and flue gas probe with temperature probe
• TÜV-tested according to EN 50379, Parts 1-3

Emission checks in industry are easy with the flue gas analyzer testo 340. Professional technology meets practical design. The testo 340 flue gas analyzer is easy-to-use for emission measurement in industries. It can be fitted with up to four different gas sensors.

• Can measure CO, COlow, NO, NOlow, NO2 or SO2
• Extended measuring range for use in environments with high gas concentrations
• Integrated pressure difference and air flow measurements for mass flow calculations

Flue gas analysis with no stress, paper or shaky probes – the new testo 330i flue gas analyzer makes this possible. This instrument combines the proven measuring technology of its predecessor testo 330 LL with a revolutionary new method of operation.

• Paperless documentation and report generation on site via smartphone app
• Operation independent of measuring location via smartphone app
• Completely enclosed plastic housing – particularly robust

The testo 300 flue gas analyzer is ideal for the most important measurements involving heating systems. It combines decades of experience in measuring technology with contemporary smart-touch operation, robust construction and e-mailing of reports. The testo 300 enables easy measurement of flue gas, draught, pressure, ambient CO and differential temperature.

• Intuitive measurement menus and the fast-response Smart-Touch display ensure easy operation – as on your smartphone
• Including O 2 and CO sensor up to 4, 000 ppm
• Creation of documentation directly on site and e-mailing of reports

The TÜV-tested intelligent professional flue gas analyser testo 330-2 LL to carry out all standard installation, service and maintenance in and around heating systems, comes with a wide range of user-changeable, longlife sensors that last for up to six years.

• High-resolution colour graphic display with quick and easy menu structure
• Storage space for 500 measurement values
• Measurement of flue gas, draught, pressure, ambient CO, differential temperature and gas leak detection
• O2 and CO sensor and flue gas probe with temperature probe
• TÜV-tested according to EN 50379, Parts 1-3

Gas Analyzer - Model - CO2 - IRPC 100

• Gas Analyzer to detect Deuterium (D2) in pure Nitrogen (N2)

• Range : 0 - 100%, Resolution: 0.1%.

• Electronic Unit and Detector Unit housed

• In separate compartment. Electronic Unit to be connected electrically

• Through Safety barrier to Detector Unit.

Deuterium Gas Analyzer - Model - D2 A

• Gas Analyzer to detect Deuterium (D2) in pure Nitrogen (N2)

• Range : 0 - 100%, Resolution: 0.1%.

• Electronic Unit and Detector Unit housed

• In separate compartment. Electronic Unit to be connected electrically

• Through Safety barrier to Detector Unit.

Binary Gas Analyzer for on-line indication for gas mixtures such as Ar/N2, Ar/He, Ar/H2, Ar/Co2 and any other combination of two different gases.
On-line gas purity/total impurity analyzer with resolution 0.1% (for Hydrogen & Helium0.01%).

Features

• Four Filament TCD (impoted) Diffusion type
• Change over value for sample and reference
• Two needle valves & rota meter for Gas Flow Controls
• The prominent attributes of incorporated Electronic Control Panel are as follows
• Digital Display 31/2 LED with 0.1% resolution
• Zero & Span (or two point) control for calibration to get direct read out of % selection
• Switch for % or mA current indication
• Filement temp control with overload protection saves filements
• Current is adjusted automatically as per composition gas
• Recorder out put -mv as standard

OM WMSP 100 Online O2 Gas Analyzer with Suction pump has been designed for accuracy , reliability , easy of use and and ease of service. It uses customer replaceable Electrochemical sensors which respond quickly to the oxygen present in the sample gas. sensors life expectancy is between 1- years. If you use low oxygen In operation , a built in sample suction pump drew in the flue gas sample through the S.S. tiff Lon 1/8 and flow mete r then on to oxygen sensors .the detect O2 are LED digital meter .

The Ultra High Purity Gas Analyzer available with us is provided by Orthodyne - Belgium which offers various custom-built devices to meet clients specific analysis needs. The product is tailor-made as per the demands of end users. It uses the science of chromatography to measure impurities in virtually all gases. Some of the application areas of the product are as follows:
Aerospace industry, for products' high-precision and reliable measuring capacities
Gas industry; in all facilities from air separation plants to gas bottling centre.

MAP O2 (Modified Atmosphere package) is a bench top, portable oxygen analyzer used primarily for the measurement of residual oxygen in gas-flushed food packages. This MAP (Modified Atmosphere Packaging) Oxygen Analyzer is used to measure the gas levels inside individual product packages. Gas is measured by sampling the package using a sample needle inserted into the package . Sample is drawn through a sample line, measured and readings are held on the display until the next sample cycle is requested. Unit may be operated using line power 230 volt ac. The unit measures down to 0.1% for Residual O2 and up to 100% for Enhanced Oxygen.