Instrumentation World

Gopalapuram, Coimbatore, Tamil Nadu

NUNES Smoke Visibility Tester made of a plywood chamber inner side painted by heat proof paint the ceiling of the chamber have a hole which permit to hold light meter cell while testing. There is a hole in the bottom of the chamber, which is aligning to the ceiling hole. There is a clear glass bulb fitted to the bottom hole. Left-hand side of the chamber has a hole, an exhaust fan fitted to the left hand side hole. Right hand side have hole which permit to flow air at the time of the exhaust of the smoke to the chamber. The front of the chamber has a hinged door, which have a clear glass window on the door. There are shutters on the left hand side and the right hand side hole of the chamber. The LUX of the bulb control with the help of an electronics regulator fitted in the panel of the instrument. The ceiling hole and the front glass window covered with the black curtain. The chamber fitted on the section stand. A LUX meter is supplied with the instrument for the measurement of the LUX of the light. There is a aluminium silicate and a stainless steel plate also supplied with the instrument. There is a stainless steel specimen frame tilted at 20?a to the vertical and have the provision to hold the specimen and there is provision to slide the specimen frame. There is a burner mount on the bottom of the chamber at an angle of 45. A flow meter, pressure gauge and pressure regulator are fitted on the section frame for the adjustment of the supply of the gas. All the parts are painted or polished for the corrosion resistance long life. We will not supply the any gas with the instrument.

The NUNES Crease Recovery Tester is designed to measure crease recovery angle of fabrics. It consists of a rotary circular scale on which a spring type specimen clamp is fixed on the base plate on which the above arrangement is mounted. The test specimen is fixed on a loading strip supplied with the equipment. After folding the specimen on the creasing line marked on the strip, the loading strip with folded specimen is kept on an anvil under the dead load of the loading arrangement for a specified time. After that the specimen with the loading strip is transferred to the clamp of the rotary circular scale, where it is held in manner that the fold lies in a horizontal line on the axis of the circular scale. The circular scale with the clamp is rotated till the free limb of the specimen becomes vertical which is judged by aligning it to a vertical pointer. The crease recovery angle is directly read on the circular scale.

Our experts put their immense efforts in offeringHMV Horizontal Flammability Tester. By using quality-approved components, this tester is manufactured under the visionary guidance of our experts in accordance with global market standards with the aid of pioneering techniques. The provided tester is used to check the flammability of plastics. Also, our clients can avail this HMV Horizontal Flammability Tester from us at an economical price range from us.
Features:

• Trouble-free functionality
• Low maintenance
• Sturdy construction
• Easy operation

Description:

The NUNES Flammability Tester for interior of motor vehicle consists of a stainless steel box. The box has four slits of specified width on the upper part of all sides and the bottom plate has 10holes of specified diameter. The box have an access window of a heat resistant glass plate in the front, and a door that have a slot that allow U-shaped clamp enter the box, and a hole for passing a hose from a gas burner, on the side. The box is fitted with four legs and the bottom part raised by 10mm. the clamps made of metal of U-shape of a specified dimension. A Bunsen burner of specified dimension is fitted on the bottom of the stainless steel box. The length of flame control with the help of the needle valve. The flame of the burner is automatically controlled with the help digital preset timer and synchronous motor.

Technical Data:

At the cost of just a few rolls of litmus paper, you can have the industrys best pocket-size pH tester. The Checker B supplies you with fast and accurate readings from 0.00 to 14.00 PH with a resolution of 0.01 PH. This compact tester features a large easy-to-read LCD and a simple to perform 2-point calibration. The Checker is fast, accurate, lightweight and with 3000 hours of battery life, you dont have to worry about frequent battery replacement. The Checker B is designed to work with any standard BNC electrode( not Supplied with the meter). Testing pH has never been easier!

Order Information:

• Checker B is supplied with, batteries and instructions
• Please note you will need to purchase an electrode separately

Special Features :

• Applicable in production site, laboratory and workshop in factory
• Easy operation menu and large LCD display
• The sensor sliding along the surface by driving the mechanism
• Highly sophisticated inductance sensor
• The exclusive DSP processes to outputs the measurement results on LCD
• Manual or automatic shut down
• Circuit with high capacity
• Small in size, light in weight and easy to use
• Can communicate with PC computer for statistics
• Compatible with four standards, ISO, DIN, ANSI and JIS

We are suppliers of Mastic Hardness Tester For Bitumen For determining the hardness number of Mastic Asphalt for flooring. It consist of an internally insulated cabinet to the base of which is fitted a water bath having two taps. The bath is heated by an immersion heater and the temperature is controlled with the thermostat at 35 +/- 0.5 C. A 6.5mm dia pin is loaded on the specimen by means of a lever to give a 31.7 Kg weight. A dial gauge

Specifications:

• 0.01 x 25 mm is provided to record the penetration of pin into the specimen.
• Application For determining the hardness number of Mastic Asphalt for flooring
• thermostat at 35 +/- 0.5 C. A 6.5mm

Aiming at optimum client-satisfaction, we have been involved in offering a wide range ofDigital ELCB Testeror Digital ELCB (RCD) Testersince our establishment. Offered product is designed with premier-grade components by our vendors. Offered is highly reliable for a prolonged service life and acclaimed by the clients fore their below mentioned features:

Features:

• Indicates tripping phase angle
• Over temperature shut-down
• Transient protection

Specifications:

Backed by rich industry expertise, we are offering our clients high qualitySoil pH Meter. Ideal instrument for measuring pH in soil, these meters are highly recommended for use in various industries. In order to cater to the requirements of the clients, we offer this range in varied specifications.

Features:

• Complete set with separate soil spear tip pH electrode
• pH 4 and pH 7 Standard buffer solution
• Auto temperature calibration
• IP65 Water proof
• Spear tip probe is ideal for measuring pH in soil, meats & cheese