Instapower Ltd.

Shivalik, Delhi

High intensity aviation warning light is used for aircraft safety for high rise building as per ICAO, FAA guidelines.Photocell (Sun switch)-Automatic change in intensity in all three modes, Synchronization of 12 high intensity light on single master control unit also available.

LED Bulkhead fitting is used for various outdoor applications with more than 85% saving in electricity by replacing a 60 W bulb.

General Features

• Made of high grade ABS
• Inbuilt photocell
• LPM technology
• Emits light in four directions
• Easy to install with help of screws
• Weight: 0.3 Kg

High intensity aviation warning light is used for aircraft safety for high rise building as per ICAO, FAA guidelines.

General Features

• Reflector-Imported reflectors for greater visibility
• Photocell (Sun switch)-Automatic change in intensity in all three modes
• Radio suppression-conforming to BS800
• Cover: Toughened glass
• Conforming to ICAO standards
• Synchronization of 12 high intensity light on single master control unit also available
• Failure alarm: visual indication
• Tested by ERDA, Vadodra-as per ICAO specifications
• Easy to install
• Weight: 19.8 Kg

Twin Low intensity aviation warning lights are used for aircraft safety on telecom towers, building, chimneys , high rise structures and transmission lines.

General Features

• Patented design
• Die-cast aluminium body
• UV stabilized optical lens for 360 illumination
• Conforming to ICAO/FAA standards
• Inbuilt ON/OFF photocell
• LPM technology
• Tested by National Physical Laboratory, New Delhi
• Tested by ERDA, Vadodra-as per ICAO specifications
• Base plate provided for easy mounting

Low intensity aviation warning lights are used for aircraft safety on telecom towers, building, chimneys , high rise structures and transmission lines.

General Features

• Patented design
• Die-cast aluminium body
• UV stabilized optical lens for 360 illumination
• Conforming to ICAO/FAA standards
• Inbuilt ON/OFF photocell
• LPM technology
• Tested by National Physical Laboratory, New Delhi
• Tested by ERDA, Vadodra-as per ICAO specifications
• Base plate provided for easy mounting

Magic glow is a flexible light strip that is used as decorative lighting for indoor and outdoor applications.

General Features

• External SMPS power supply to operate 15 Mtrs
• Amplifier can be added for lengths greater than 15 Mtrs
• DMX Controller available for RGB option
• Roll length: 5 Mtrs
• Operating Voltage: 12 V DC
• IP rating: 54
• Easy to install
• Weight: 0.8 Kg

Bollard lights are used for gardens/parks, or for any other outdoor lighting application with huge saving in electricity bills.

General Features

• Aesthetically attractive
• No replacement, no maintenance
• No frequent hassle of bulb replacement
• Robust and rugged
• Inbuilt SMPS power supply
• Outdoor body made of MS/SS
• Easy to install
• Solar model also available
• Weight: 1.2 Kg

Nebula Designed for suspended applications as Industrial Sheds, Shopping Malls, Paint shops, Warehouses and Exhibition Halls.

General Features

• Attractive aesthetics
• Ceiling Suspended
• Weight 5.7 to 9.5 Kg.

LED Saura Lantern as per MNRE/ DGS & D Specifications and tested at the Solar Energy Centre.

General Features

• Efficiency> 80%
• Mobile Charging
• Inbuilt battery and charge controller
• Diffuser provided for charging and discharging
• LED indications provided for charging and discharging
• Temperature Compensated Battery Charging provided
• Battery Under Voltage and Overcharge Protection provided
• Protection against short circuit and battery Reverse Polarity
• Rust free-ABS plastic body
• Weight: 2.3 Kg

20 Watt LED Marble Glow is a good replacement for traditional 40 watt tube light luminaries and very suitable for retail stores, office with more than 50% energy saving.

General Features

• Surface mounted fixture
• Aluminum housing with high quality diffuser cover
• Efficiency: 85%
• Power Factor: >0.9
• THD:

Comet is a replacement for 224W CFL Ceiling light and used for General lighting with more than 60% energy saving.

General Features

• Recessed or surface mounted fixture with etched glass diffuser
• Slim and light weight fixture
• Luminary size: 55030050mm
• Weight: 2.5Kg.

Diffuser: PC DiffuserHousing material: Plastic ABSEasy to install with the help of clamp providedDimension: 1270x90x90mmWeight : 1.3 kg

9 Watt Light Master is a good replacement for traditional 18 watt Florescent tube light and very suitable for retail stores, office with more than 50% energy saving.

General Features

• Very attractive aesthetics
• Can be linked multiple pieces
• Better and uniform light output
• Inbuilt LED driver
• Extruded aluminium profile with PC casing
• Easy to install

10 Watt Light Master is a good replacement for traditional 20 watt Florescent tube light and very suitable for retail stores, office with more than 50% energy saving.

General Features

• Retrofit fit design T8, easy to install
• Better light output
• Inbuilt LED driver
• Extruded aluminum profile with polycarbonate casing
• Weight: 0.7 Kg.

D-Lite Mini LED Down Lighter is replacement for equivalent 15 W Halogen Down lighter with more than 70% energy saving.

General Features

• Separate electronic driver cabin
• Two clamps on opposite sides for easy installation within ceiling
• Cutout Dia: 26 mm
• Weight: 0.05 Kg.

D-Lite R iCare is a new generation glare free lighting. It is ideal for hospitals, laboratories, offices etc. with energy saving of more than 60%.

General Features

• Glare Free Lighting
• Attractive aesthetics
• Slim and light weight recessed fixture.
• Separate electronic driver cabin
• Two clamps on opposite sides for easy installation within ceiling
• Cutout size: 100x100mm
• Product Dimensions: 120x120x20mm

Insta LED Bulb is used for general lighting with more than 60% energy savings. It is a replacement for 50W Incandescent Bulb and 13W CFL.

General Features

• Robust Power Supply
• Retrofit in existing fixtures
• Polycarbonate Diffuser
• Die cast Aluminium Fixture
• Easy to install with the applicable holder

Reflector-Imported reflectors for greater visibilityPhotocell (Sun switch)-Automatic change in intensity in all three modesRadio suppression-conforming to BS800Cover: Toughened glassConforming to ICAO standardsSynchronization of 12 high intensity light on single master control unit also availableFailure alarm: visual indicationTested by ERDA, Vadodra-as per ICAO specificationsEasy to install

Reflector-Imported reflectors for greater visibilityPhotocell (Sun switch)-Automatic change in intensity in all three modesRadio suppression-conforming to BS800Cover: Toughened glassConforming to ICAO standardsSynchronization of 12 high intensity light on single master control unit also availableFailure alarm: visual indicationTested by ERDA, Vadodra-as per ICAO specificationsEasy to install

Console acts as master unit for front, rear side and inside display. Console has memory to save 300 routes with 150 stops each. IP-65 Protection. Automatic Brightness control.Over Voltage and under voltage protection. Non-multiplexed design.

Light Characteristics

LED Color: Display Boards:- Amber, Console:- Blue Graphic LCD Character Size: Display Boards:- 120-200 mm , Console:- 6 mm Display Pattern: Display Boards:-Fixed/ Scroll , Console:- Fixed

3D Character Signage Stainless steel characters with acrylic sheet front face Acrylic characters (colored) Acrylic characters (white) with colored vinyl pasted on it. Aluminium Composite Panel (ACP)-on request Wall Mounted/ Hanging with clamps

Backlit Signage are display boards generally used for indoor application. They are replacements for backlit display boards in use currently that incorporate tube lights, thereby reducing power consumption by more than 50-60%.

General Features

• LED Tiles/ SMD LED Strips are used for lighting
• Very low power consumption
• Inbuilt power supply
• Attractive aesthetics
• No secondary optics used
• Easy installation either with the help of clamps/chain or wall mounting

High powered low heating LEDsInbuilt Battery chargerLED indications provided on the fixtureRobust rugged designStand alone PortableWall mounting brackets ProvidedWeight: 3.2 Kg

These Obstruction Lights Can Generally Be Found Attached To Any Tall Structure Such As Broadcast Masts, Telecom Towers, Transmission Towers, TV Towers, Radio Towers, Water Tanks Located On High Elevation, Electricity Pylons, Chimneys, Tall Buildings, Cranes, Lighthouses, Windmills, Wind Cone (Windsocks), Bridges And Wind Turbines. Shorter Structures That Are Located Close To Airports May Also Require Lighting. Lights Are Usually Arranged In Clusters Around The Structure At Specific Heights Above The Ground. Frequently There Will Be A Set At The Top, And Then One Or More Sets Equally Spaced Down The Structure.

Instapower Now Offers The Benefits Of LED Lighting In Its Collection Of Aviation Warning Light And LED Aviation Light. These Aviation Lights Are Installed Atop High Rise Structures, Buildings And Towers And Help In Protecting The Damage To Life And Property. We Offer Superior Quality Medium And Low Intensity Aviation Light , Which Meet All Specification Of International Civil Aviation Organization (ICAO), Montreal , Canada . These Provide The Benefits Of LED Lighting Technology And Require Low Initial As Well As Operating Costs And Serve For Long. These Aviation Light Can Be Installed At High Rise Structures As Per Their Heights And Widths And Are Vital For Safe Passage For Aviation, And Protection Of Valuable Human Life And Property. Instapower Has Developed These LED Based Models With The Objective Of Reducing The Power Consumption Without Making Any Compromise To The Performance And Specifications Required.

Traditionally, Red Lamps (Or BeaconsHazard) Use Incandescent Filament Bulbs. In Order To Improve The Otherwise Quite Short Lifespan, They Are Made With A Ruggedised Design And Are Run Below Normal Operating Power (Under-Running). A Recent Development Has Been The Use Of Arrays Of High Power Red LEDs In Place Of Incandescent Bulbs, Which Has Only Been Possible Since The Development Of LEDs Of Sufficient Brightness. LED Based Aviation Lamps Have A Significantly Longer Lifespan Than Incandescent Bulbs, Thus Reducing Maintenance Costs And Increasing Reliability.

25 Watt is a Post Top Lamp and is ideal for outdoor lighting. It has a victoria era look and finish and an old world charm about it. Black powder coated fixture with partially diffused and frosted toughened glass polycarbonate sheet.

Instapower Now Offers The Benefits Of LED Lighting In Its Collection Of Aviation Warning Light And LED Aviation Light. These Aviation Lights Are Installed Atop High Rise Structures, Buildings And Towers And Help In Protecting The Damage To Life And Property. We Offer Superior Quality Medium And Low Intensity Aviation Light , Which Meet All Specification Of International Civil Aviation Organization (ICAO), Montreal , Canada . These Provide The Benefits Of LED Lighting Technology And Require Low Initial As Well As Operating Costs And Serve For Long. These Aviation Light Can Be Installed At High Rise Structures As Per Their Heights And Widths And Are Vital For Safe Passage For Aviation, And Protection Of Valuable Human Life And Property. Instapower Has Developed These LED Based Models With The Objective Of Reducing The Power Consumption Without Making Any Compromise To The Performance And Specifications Required.

Traditionally, Red Lamps (Or BeaconsHazard) Use Incandescent Filament Bulbs. In Order To Improve The Otherwise Quite Short Lifespan, They Are Made With A Ruggedised Design And Are Run Below Normal Operating Power (Under-Running). A Recent Development Has Been The Use Of Arrays Of High Power Red LEDs In Place Of Incandescent Bulbs, Which Has Only Been Possible Since The Development Of LEDs Of Sufficient Brightness. LED Based Aviation Lamps Have A Significantly Longer Lifespan Than Incandescent Bulbs, Thus Reducing Maintenance Costs And Increasing Reliability.