Our Products
Corrosion And Rust Control Products
2 Products availableLubricants
2 Products availableOil And Lubricants
2 Products availableCleaning Wipes & Liquids
2 Products availableEpoxy Coatings
2 Products availableCleaning Chemicals
1 Products availableElectronic Component Cleaner
1 Products availableWe offer the best product range of Synthetic Adhesive Lubricant, High Voltage Splice Cleaner, Non-Flammable Cleaners, Multi Purpose PTFE Spray and Eco-Friendly Rust Remover.
ISCTM 09 helps remove oil, dirt, flux residue and moisture from electrical components, equipment and contacts. It’s ideal for printed circuit boards, controls, switches, precision instruments and electrical panels.
Features :
Directions :
Caution
Disclaimer- Under no circumstances will the manufacturer/ company (INSTA SPECIALITY CHEMICALS) be held responsible or liable in any way for any claims, damages, losses, expenses, costs or liabilities whatsoever (including without limitation, any direct or indirect damages for loss of profits, business interruption or loss of information from your use of or inability to use this product.)
Size Available :
Additional Information:
Payment Terms : T/T
Packaging Details : Aerosol - 400 ml
Bulk- 5, 25 & 210 lit.
Description :
ISCTM 120 is a one component, fast curing coating for printed circuit assemblies. It is ideal for high moisture environments, environmental protection and for easy repair and rework. ISC 120™ Fluoresces under UV light for easeof inspection.
Features
Application
DippingDepending on the density, configuration and other factors of the components on the assembly, it may or may not be necessary to reduce viscosity of ISCTM 122. To obtain a uniform layer, ISCTM THINNER 01 can be used. After the optimised viscosity is achieved, rate of immersion and withdrawal should be controlled (5 – 15 cm/min). During this application, there will be a loss of solvent from ISCTM 122 in the tank, therefore viscosity should be constantly maintained by ISCTM THINNER 01 and checked regularly with appropriate lab instruments (Ford viscosity cup).
SprayingISCTM 122 can be sprayed with spraying equipment. This method should be done in a well ventilated environment. The addition of ISCTM THINNER 01 is necessary for this method, the viscosity and pressure can be adjusted according to the spraying equipment & technique.
BrushingISCTM 122 can be brushed directly or even ISCTM THINNER 01 can be added to achieve the desired viscosity needed for brushing.
Storage : ISCTM 122 should be stored away from excessive heat or cold, in tightly closed containers
Aerosol
Note
Additional Information:
Payment Terms : T/T
Packaging Details : Aerosol - 400 ml
Bulk- 1, 5, 25 & 210 lit.
Description : ISCTM 201 is an adhesive lubricant added with high pressure resistance synthetic oil. Extraordinarily, tear proof lubricant film with heavy duty corrosion protection.
Features
ApplicationsSuitable for all types of lubrication under high pressure. e.g. on gear, throttle and clutch linkages, Bowden wires, bolts, joints, hinges, levers, lock strikers, drag link ends, slide rails, sprockets, racks and pinions, open gears, chains, O-ring, X-ring, Z-ring and much more.
Directions for Use
Caution
Additional Information:
Payment Terms : T/T
Packaging Details : Aerosol - 150 ml & 400 ml
Bulk- 5, 25 & 210 Lit.
Description : ISCTM 202 is a PTFE coating for dry lubrication of various materials at low pressure, low speed and in dusty environment. It is ideal for long lasting lubrication, reducing friction and corrosion protection. It dries quickly and resists dirt and dust.
Features
Applications :
Directions for Use
Caution
Additional Information:
Payment Terms : T/T
Packaging Details : Aerosol- 400 ml
Bulk- 5, 25 & 210 lit.
Description :
NOKRUSTTM 90 is a VOC free fast drying rust converter formulated for treatment of lightly rusted or even correctly prepared metal parts and surfaces. NOKRUSTTM 90 helps neutralise and convert rust into a black protective film. The converted coat can be used as a finish coat or can be painted over as well. For, heavy protection paint the converted object with high rust resistance paint. NOKRUSTTM 90 is non-flammable and contains no hazardous solvents.
Features
Applications
Directions for use
Liquid
Aerosol
Caution
Additional Information:
Payment Terms : T/T
Packaging Details : Aerosol- 400 ml
Bulk- 5, 25 & 210 kg
Description :
NOKRUSTTM 220 is a quick drying, non-residual, non-conductive, non-flammable aggressive cleaner. NOKRUST™ 220 is a fast penetrating cleaner which effectively removes soils, dirt, oxides, silicones, oils, greases and other contaminants. NOKRUST™ 220 is a superior alternative compared to other flammable cleaners due to no flash point and safety usage.
Features
Directions
Caution
NOKRUSTTM 220 (Non – Flammable Cleaner)
DESCRIPTION
NOKRUSTTM 220 is a quick drying, non-residual, non-conductive, non-flammable aggressive cleaner. NOKRUST™ 220 is a fast penetrating cleaner which effectively removes soils, dirt, oxides, silicones, oils, greases and other contaminants. NOKRUST™ 220 is a superior alternative compared to other flammable cleaners due to no flash point and safety usage. NOTE – Does not contain 1, 1, 1 Trichloroethane or any known Ozone Depleting Substances.
FEATURES
• Non - flammable
• Leaves no residue.
• Quick drying formulation.
• Industrial strength cleaning action.
• High dielectric strength ( > 39.5 kV ).
• 360° valve, helps spray in an position.
• Can be used on High Voltage Splices.
• Removes oil, dirt, flux, oxides, silicones and more.
• Drives out moisture.
• Does not contain 1, 1, 1 Trichloroethane or any known Ozone depleting substances.
• Non-flammable CO2 propellant, gives more than 90% active content.
Additional Information:
Payment Terms : T/T
Packaging Details : Aerosol- 400 ml
Bulk 5 kg, 25 kg, 300 kg
Description :
NOKRUSTTM 60 is a heavy duty multi use lubricant, penetrant, rust preventive, rust loosener and moisture remover.
Features :
Directions for use
Size Available
Caution
Additional Information:
Payment Terms : T/T
Packaging Details : Aerosol- 100 ml & 400 ml
Bulk- 5, 25 & 210 lit.
isctm 26 (multi purpose product for electrical equipment)
description
isctm 26 is a powerful multi-purpose product for electrical equipment. helps prevent electrical and electronic devices to damage from water penetration, humidity and corrosion.
features
can be used on metals and alloys.
safe on most plastics, painted surfaces, coatings and rubber.
helps restore resistance values by reduction in current leak.
drives out moisture of the material.
helps restore electrical equipment which has faced damage due to water penetration.
cleans & protects from rust.
precise lubrication and high dielectric strength.
loosens rusted parts very quickly.
frees sticky mechanisms.
non-flammable co2 propellant and also gives more than 95 percent active product content.
applications
helps to protect, lubricate and restore,
electrical connectors
circuit breakers
transformers
switch gears
motors
generators
controls
instruments
communication assemblies
electronics
alarm systems
starters
Additional Information:
Payment Terms : T/T
Packaging Details : SIZE AVAILABLE
BULK - 5, 25, 210 lit. HDPE Carboy
AEROSOL 400 ml
nokrust305 (eco-friendly rust remover)
description
nokrust 305 is an eco-friendly rust remover dip solution that works at room temperature. It helps eliminate processes such as sanding or scrubbing. Contains no toxic acids, bases and petroleum solvents, this makes it fume free, easy and simple to use.
note nokrust 305 can darken high carbon materials a little bit.
nokrust 305 has an expiry of 3 months, so the product is made after the order is placed.
features
removes heavy rust completely, even in cracks and crevices.
works at room temperature.
no flash rusting
does not affect most plastics and rubber.
no fumes or odour non flammable
eco friendly single pack system
water soluble voc free
will not change the size, shape of the material.
Additional Information:
Payment Terms : T/T
Packaging Details : SIZE AVAILABLE
5 kgs and 25 Kgs Carboy
nokrusttm bio- degradable degreaser 300
description
nokrusttm 300 is non corrosive, easily biodegradable industrial strength degreaser for ferrous and non ferrous metals. It does not harm painted surfaces, natural rubber, electric wiring insulation, leather, carpet, most rubbers and most plastics.
features
non corrosive.
non flammable.
easily biodegradable.
ultrasonic cleaner.
works at cold and hot temperatures both.
industrial strength degreaser.
outperforms most alkaline chemicals and solvents.
applications
spraying
nokrust 300 is ideal for high pressure and steam cleaning applications.
the higher the pressure, the lower the concentration needed.
note parts after washing with nokrust 300 should be thoroughly dried.
dipping
for room temperature dipping, use a dilution ratio of (10% - 20%) in soft / dm water. For hot dipping method, use a dilution ratio of 5% in soft / dm water.
for ultrasonic cleaning nokrust 300 is highly recommended.
note parts after washing with nokrust 300 should be thoroughly dried.
Additional Information:
Payment Terms : T/T
Packaging Details : SIZE AVAILABLE
Bulk 5 liters, 25 liters & 210 liters
Additional Information:
Packaging Details : SIZE AVAILABLE
5 kgs and 25 Kgs Carboy
ISC 204 is a graphite base dry lubricant, which helps lubricate metals, conveyors, locks, rollers, wheels, gears and much more. Temperature Resistance up to +450C.
Additional Information:
Payment Terms : T/T
Packaging Details : SIZE AVAILABLE
Aerosol - 400 ml
Bulk- 1 lit, 5 lit, 25 lit & 210 lit
Also Available in paste form.
ISCTM 201 + MoS2 (SYNTHETIC PENETRATING ADHESIVE LUBRICANT)
DESCRIPTION
ISCTM 201 + MoS2 is an adhesive lubricant added with high pressure resistance synthetic oil and MoS2 for maximum lubrication. Extraordinarily, tear proof lubricant film with heavy duty corrosion protection.
FEATURES
Highly resistant to water and moisture.
Heavy duty corrosion protection.
High pressure resistance adhesive lubricant.
Good penetrating properties.
Can be used on O-ring, X-ring, Z-ring, Bike chains and much more.
No action on seals.
Safe on most plastics, rubbers, painted surface.
Can be used on metals and alloys.
Reduces friction and loss of power.
Good adherence on chains even at high speeds.
APPLICATIONS
Suitable for all types of lubrication under high pressure. e.g. on gear, throttle and clutch linkages, Bowden wires, bolts, joints, hinges, levers, lock strikers, drag link ends, slide rails, sprockets, racks and pinions, open gears, chains, O-ring, X-ring, Z-ring and much more.
Additional Information:
Payment Terms : T/T
Packaging Details : SIZE AVAILABLE
Aerosol 400 ml
Bulk 5 lit, 25 lit & 210 lit HDPE Carboy