We are the main supplier of this product.

Transistor characteristics (model : il-07) -two variable dc regulated power supply of 0-12v at 250ma -dual range dc voltmeter of 1.5v15v -dc ammeter of 0-10ma-dc ammeter of 0-250ua-required number of patch cords-operation manual.

Pn junction diode characteristics (model : il-05) -variable dc regulated power supply of 0-12v at 250ma -on board silicon & germanium diodes-dual range dc voltmeter of 1.5v15v -dual range dc ammeter of 250ua20ma-required number of patch cords-operation manual.

Zener diode characteristics (model : il-06) -variable dc regulated power supply of 0-12v at 250ma -on board different valued three zener diodes-on board different valued three resistors-dual range dc voltmeter of 1.5v15v -dual range dc ammeter of 250ua20ma-required number of patch cords-operation manual.

Ujt characteristics (model : il-09) -two variable dc regulated power supply of 0-12v at 250ma -dual range dc voltmeter of 1.5v15v -dc ammeter of 0-10ma-required number of patch cords-operation manual.

BCD to 7 Segment Decoder (Model : IL-10) -Built in fixed 5V and Gnd -On board 7447 Decoder-4 SPDT input switches-On board LT542 Segment display-Required number of Patch Cords-Operation Manual.

Rc coupled fet amplifier (model : il-01) -built in fixed power supply of 12v at 250ma -on board fet chip-input and output sockets-required number of patch cords-operation manual.

Logic gates (model : il-03) -built in logic inputs with spdt switches at 5v -on board output led sockets-nand, nor, not, and & or gates each -required number of patch cords-operation manual.

ATMEL 8051 PROJECT DEVELOPMENT BOARD with on board AT89S52& ZIF Socket
Brief
If you are learning microcontrollers or want to quickly develop embedded project based on standard 8051 core, than this board will help you quick start with the application by giving you access to everything required to run the AT89S52 microcontroller.

Features:
On board AT89S52 Microcontroller IC & ZIF Socket Support
RS232 Serial Driver for Serial Communication with PC/External Hardware
On board status LED
Can be powered with 12V AC/DC Adapter
ISP pins for programming IC
Software download and instructions links will be available with the package

Metal Detector Kit Electronic Project Kit

METAL DETECTOR DIY PROJECT UNASSEMBLED KIT
Brief
The project is a UNASSEMBLED KIT
Copper coil acts as inductance. The coil is fed into 555 IC. The capacitor & copper coil induces a frequency for the output signal from 555 IC. In case of any metal contacts with the copper coil, its frequency changes, thus changing the output signal frequency of 555 IC. This could be noticed with a small amount of change in the humming sound from speaker.

UNASSEMBLED KIT CONTENTS
Printed Circuit Board (which needs to be soldered)
Electronic Components for the project
Copper Coil for Inductance
DC Buzzer/Speaker
Project Document with Abstract, Circuit & Schematic (for soldering)
Plastic Storage Box

PCB DOES NOT CONTAIN ANY LOGO OR TRADEMARK, Hence can easily be used for school/college project purposes.

INSIGNIA LABS - LIGHT FOLLOWER ROBOT (LDR BASED ROBOT

Details:

• Light Follower Robot detects and follows the Torch Light.
• This is a pre-assembled, ready to run kit. The robot contains 2 LDR Sensors, When user throws light on left LDR, the Robot turns Left. If the user throws light on right LDR, the Robot turns Right. If both LDR are exposed to Torch then the Robot moves forward.
• It doesnt require any micro controller or coding. Its very easy to use this beautiful robot.
• The robot is preassembled and you will also get the track to instantly demonstrate the experiment.Torch is not included with the package. Its very easy to demonstrate the light following with your robot you just need to put your robot on ground and expose the torch over it, the robot will follow accordingly.

PCB DOES NOT CONTAIN ANY LOGO OR TRADEMARK, Hence can easily be used for school/college project purposes

CLAP SWITCH BASED AC LIGHT BULB CONTROL PROJECT ASSEMBLED KIT
Brief
The project is a fully assembled kit
The project includes a Mini Microphone which is interfaced with an amplifier circuit. If the user claps, the sound is received via MIC and gets amplified by the circuit. The signal is then passed though multivibrator circuit or known as Latch circuit. The final signal is provided to transistor which turns on the AC Light Bulb via a relay. User claps, Light turns on and vice versa.

Project Features
Fully Assembled project kit
Slide switch on/off control on board
Transistor based circuit
Microphone Sensor Included
AC Holder interface with AC Cable (Does not include bulb)
9V Battery Included
Includes Storage Box & Project Document

Line Follower Robot Complete Kit with Line Track

INSIGNIA LABS - LINE FOLLOWER ROBOT

Details:Line Follower Robot detects and follows black line on white floor/white chart.This is a pre-assembled, ready to run kit. The robot uses 2 IR sensor and other required components. It doesnt require any micro controller or coding.

Its very easy to use this beautiful robot. The robot is preassembled and you will also get the track to instantly demonstrate the experiment.

You can also make your own track using 1.5 3 Inch Black tape on white floor/paper/chart. Its very easy to demonstrate the line following with your robot you just need to put your robot on track and turn the switch ON, the robot will follow the line.

GAS/SMOKE DETECTION & ALARM DIY PROJECT ASSEMBLED KIT
BriefThe project is a FULLY ASSEMBLED KITThe project includes a small gas sensor board which is interfaced to other board with LM358 on it. The gas sensor senses the smoke and sends the signal to LM358 which will compare the signal voltage with a reference one. Based on a proper smoke signal, the IC will switch on the transistor which in turn will switch on the Alarm via relay. The alarm stops once the smoke fades away.

Project FeaturesFully Assembled project kitSlide switch on/off control on boardLM 358 based circuitGas/Smoke SensorDC Buzzer interface9V Battery IncludedIncludes Storage Box & Project Document

PCB DOES NOT CONTAIN ANY LOGO OR TRADEMARK, Hence can easily be used for school/college project purposes

LDR Sensor based Light Bulb Control Electronic Project

LDR BASED LIGHT/BULB CONTROL DIY PROJECT ASSEMBLED KIT
BriefThe project is a fully assembled kitBased on light conditions the Motor/Fan could be controlled using LDR.Under light conditions the Light/Bulb will turn off and under dark conditions the Light/Bulb will turn on.

Project FeaturesFully Assembled project kitSlide switch on/off control on boardTransistor based circuitDC Bulb interface9V Battery IncludedIncludes Storage Box & Project Document

PCB DOES NOT CONTAIN ANY LOGO OR TRADEMARK, Hence can easily be used for school/college project purposes

MQ2 Gas Smoke Sensor Module

MQ2 GAS SMOKE LPG BUTANE SENSOR BOARD MODULE
Details:
High Quality PCB Driver Module
Onboard Capacitive filter
Controllable by 5V/3.3V
For detecting Gas/Smoke/LPG/Butane Gases
Module can be used for Arduino/PIC/Electronic Projects

CLAP SOUND SENSOR BOARD MODULE
Details:
High Quality PCB Module
LM358 based design
Controllable by 5V/3.3V
For detecting sound/noises like Clap/Snitch
Module can be used for Arduino/PIC/Electronic Projects

4X4 MATRIX BUTTON KEYPAD WITH 16 BUTTONS
Details:
High Quality PCB
On board 16 Push On Switches
Numbered & Alphabet Labels on PCB
Berg pins for output
Module can be used for Arduino/PIC/Electronic Projects

We are the main supplier of this product.

Transistor characteristics (model : il-07) -two variable dc regulated power supply of 0-12v at 250ma -dual range dc voltmeter of 1.5v15v -dc ammeter of 0-10ma-dc ammeter of 0-250ua-required number of patch cords-operation manual.

Pn junction diode characteristics (model : il-05) -variable dc regulated power supply of 0-12v at 250ma -on board silicon & germanium diodes-dual range dc voltmeter of 1.5v15v -dual range dc ammeter of 250ua20ma-required number of patch cords-operation manual.

Zener diode characteristics (model : il-06) -variable dc regulated power supply of 0-12v at 250ma -on board different valued three zener diodes-on board different valued three resistors-dual range dc voltmeter of 1.5v15v -dual range dc ammeter of 250ua20ma-required number of patch cords-operation manual.

Ujt characteristics (model : il-09) -two variable dc regulated power supply of 0-12v at 250ma -dual range dc voltmeter of 1.5v15v -dc ammeter of 0-10ma-required number of patch cords-operation manual.

BCD to 7 Segment Decoder (Model : IL-10) -Built in fixed 5V and Gnd -On board 7447 Decoder-4 SPDT input switches-On board LT542 Segment display-Required number of Patch Cords-Operation Manual.

Rc coupled fet amplifier (model : il-01) -built in fixed power supply of 12v at 250ma -on board fet chip-input and output sockets-required number of patch cords-operation manual.

Logic gates (model : il-03) -built in logic inputs with spdt switches at 5v -on board output led sockets-nand, nor, not, and & or gates each -required number of patch cords-operation manual.

ATMEL 8051 PROJECT DEVELOPMENT BOARD with on board AT89S52& ZIF Socket
Brief
If you are learning microcontrollers or want to quickly develop embedded project based on standard 8051 core, than this board will help you quick start with the application by giving you access to everything required to run the AT89S52 microcontroller.

Features:
On board AT89S52 Microcontroller IC & ZIF Socket Support
RS232 Serial Driver for Serial Communication with PC/External Hardware
On board status LED
Can be powered with 12V AC/DC Adapter
ISP pins for programming IC
Software download and instructions links will be available with the package

Metal Detector Kit Electronic Project Kit

METAL DETECTOR DIY PROJECT UNASSEMBLED KIT
Brief
The project is a UNASSEMBLED KIT
Copper coil acts as inductance. The coil is fed into 555 IC. The capacitor & copper coil induces a frequency for the output signal from 555 IC. In case of any metal contacts with the copper coil, its frequency changes, thus changing the output signal frequency of 555 IC. This could be noticed with a small amount of change in the humming sound from speaker.

UNASSEMBLED KIT CONTENTS
Printed Circuit Board (which needs to be soldered)
Electronic Components for the project
Copper Coil for Inductance
DC Buzzer/Speaker
Project Document with Abstract, Circuit & Schematic (for soldering)
Plastic Storage Box

PCB DOES NOT CONTAIN ANY LOGO OR TRADEMARK, Hence can easily be used for school/college project purposes.

INSIGNIA LABS - LIGHT FOLLOWER ROBOT (LDR BASED ROBOT

Details:

• Light Follower Robot detects and follows the Torch Light.
• This is a pre-assembled, ready to run kit. The robot contains 2 LDR Sensors, When user throws light on left LDR, the Robot turns Left. If the user throws light on right LDR, the Robot turns Right. If both LDR are exposed to Torch then the Robot moves forward.
• It doesnt require any micro controller or coding. Its very easy to use this beautiful robot.
• The robot is preassembled and you will also get the track to instantly demonstrate the experiment.Torch is not included with the package. Its very easy to demonstrate the light following with your robot you just need to put your robot on ground and expose the torch over it, the robot will follow accordingly.

PCB DOES NOT CONTAIN ANY LOGO OR TRADEMARK, Hence can easily be used for school/college project purposes

CLAP SWITCH BASED AC LIGHT BULB CONTROL PROJECT ASSEMBLED KIT
Brief
The project is a fully assembled kit
The project includes a Mini Microphone which is interfaced with an amplifier circuit. If the user claps, the sound is received via MIC and gets amplified by the circuit. The signal is then passed though multivibrator circuit or known as Latch circuit. The final signal is provided to transistor which turns on the AC Light Bulb via a relay. User claps, Light turns on and vice versa.

Project Features
Fully Assembled project kit
Slide switch on/off control on board
Transistor based circuit
Microphone Sensor Included
AC Holder interface with AC Cable (Does not include bulb)
9V Battery Included
Includes Storage Box & Project Document

Line Follower Robot Complete Kit with Line Track

INSIGNIA LABS - LINE FOLLOWER ROBOT

Details:Line Follower Robot detects and follows black line on white floor/white chart.This is a pre-assembled, ready to run kit. The robot uses 2 IR sensor and other required components. It doesnt require any micro controller or coding.

Its very easy to use this beautiful robot. The robot is preassembled and you will also get the track to instantly demonstrate the experiment.

You can also make your own track using 1.5 3 Inch Black tape on white floor/paper/chart. Its very easy to demonstrate the line following with your robot you just need to put your robot on track and turn the switch ON, the robot will follow the line.

GAS/SMOKE DETECTION & ALARM DIY PROJECT ASSEMBLED KIT
BriefThe project is a FULLY ASSEMBLED KITThe project includes a small gas sensor board which is interfaced to other board with LM358 on it. The gas sensor senses the smoke and sends the signal to LM358 which will compare the signal voltage with a reference one. Based on a proper smoke signal, the IC will switch on the transistor which in turn will switch on the Alarm via relay. The alarm stops once the smoke fades away.

Project FeaturesFully Assembled project kitSlide switch on/off control on boardLM 358 based circuitGas/Smoke SensorDC Buzzer interface9V Battery IncludedIncludes Storage Box & Project Document

PCB DOES NOT CONTAIN ANY LOGO OR TRADEMARK, Hence can easily be used for school/college project purposes

LDR Sensor based Light Bulb Control Electronic Project

LDR BASED LIGHT/BULB CONTROL DIY PROJECT ASSEMBLED KIT
BriefThe project is a fully assembled kitBased on light conditions the Motor/Fan could be controlled using LDR.Under light conditions the Light/Bulb will turn off and under dark conditions the Light/Bulb will turn on.

Project FeaturesFully Assembled project kitSlide switch on/off control on boardTransistor based circuitDC Bulb interface9V Battery IncludedIncludes Storage Box & Project Document

PCB DOES NOT CONTAIN ANY LOGO OR TRADEMARK, Hence can easily be used for school/college project purposes

MQ2 Gas Smoke Sensor Module

MQ2 GAS SMOKE LPG BUTANE SENSOR BOARD MODULE
Details:
High Quality PCB Driver Module
Onboard Capacitive filter
Controllable by 5V/3.3V
For detecting Gas/Smoke/LPG/Butane Gases
Module can be used for Arduino/PIC/Electronic Projects

CLAP SOUND SENSOR BOARD MODULE
Details:
High Quality PCB Module
LM358 based design
Controllable by 5V/3.3V
For detecting sound/noises like Clap/Snitch
Module can be used for Arduino/PIC/Electronic Projects

4X4 MATRIX BUTTON KEYPAD WITH 16 BUTTONS
Details:
High Quality PCB
On board 16 Push On Switches
Numbered & Alphabet Labels on PCB
Berg pins for output
Module can be used for Arduino/PIC/Electronic Projects