WIRELESS POWER TRANSMISSION/TRANSFER DIY PROJECT ASSEMBLED KIT
BriefThe project is a FULLY ASSEMBLED KITThe project uses two copper coil windings, one as primary and another one as secondary. The primary coil is center tapped and connected to amplifier BD139 with filters to transmit the power efficiently. Secondary coil is directly connected to a series of LEDs. Based on the wireless gap between both coils, power will be transmitted wirelessly to the other coil which will glow the LEDs.

Project FeaturesFully Assembled project kitSlide switch on/off control on boardBD139 based circuitCopper Coil InductanceLED Output9V Battery IncludedIncludes Storage Box & Project Document

PCB DOES NOT CONTAIN ANY LOGO OR TRADEMARK, Hence can easily be used for school/college project purposes

LASER SECURITY ALARM CIRCUIT PROJECT KIT WITH TWO MIRRORS REFLECTION - ELECTRONIC SCHOOL COLLEGE PROJECT ASSEMBLED KIT
BriefThe project is a fully assembled kitThe project includes a Laser Light which transmits the light to a much farther distance. Two mirrors are provided with the project kit. User can use either single mirror or two mirrors for reflecting the laser light. The reflected laser light should fall on the LDR on the second PCB.If any user passes via the Laser Beam Area then the laser light gets disturbed, which will be detected by the LDR circuit. This will turn On the Alarm. Simple & Complex Laser Area can be designed using single or double mirrors

Project FeaturesFully Assembled project kitSlide switch on/off control on boardIC555 & LM358 based circuitLaser Light & LDR Sensor IncludedTwo Reflective Mirrors IncludedDC Buzzer interface9V Battery IncludedIncludes Storage Box & Project Document

PCB DOES NOT CONTAIN ANY LOGO OR TRADEMARK, Hence can easily be used for school/college project purposes

LDR BASED STREET LIGHT CONTROL DIY PROJECT ASSEMBLED KIT
BriefThe project is a fully assembled kitBased on light conditions the Street Lights could be controlled using LDR.Under light conditions the Street Lights will turn off and under dark conditions the Street Lights will turn on.

Project FeaturesFully Assembled project kitSlide switch on/off control on boardTransistor based circuitSeries of White LEDs as Street Lights9V Battery IncludedIncludes Storage Box & Project Document

PCB DOES NOT CONTAIN ANY LOGO OR TRADEMARK, Hence can easily be used for school/college project purposes

WIRELESS POWER TRANSMISSION/TRANSFER DIY PROJECT ASSEMBLED KIT
BriefThe project is a FULLY ASSEMBLED KITThe project uses two copper coil windings, one as primary and another one as secondary. The primary coil is center tapped and connected to amplifier BD139 with filters to transmit the power efficiently. Secondary coil is directly connected to a series of LEDs. Based on the wireless gap between both coils, power will be transmitted wirelessly to the other coil which will glow the LEDs.

Project FeaturesFully Assembled project kitSlide switch on/off control on boardBD139 based circuitCopper Coil InductanceLED Output9V Battery IncludedIncludes Storage Box & Project Document

PCB DOES NOT CONTAIN ANY LOGO OR TRADEMARK, Hence can easily be used for school/college project purposes

LASER SECURITY ALARM CIRCUIT PROJECT KIT WITH TWO MIRRORS REFLECTION - ELECTRONIC SCHOOL COLLEGE PROJECT ASSEMBLED KIT
BriefThe project is a fully assembled kitThe project includes a Laser Light which transmits the light to a much farther distance. Two mirrors are provided with the project kit. User can use either single mirror or two mirrors for reflecting the laser light. The reflected laser light should fall on the LDR on the second PCB.If any user passes via the Laser Beam Area then the laser light gets disturbed, which will be detected by the LDR circuit. This will turn On the Alarm. Simple & Complex Laser Area can be designed using single or double mirrors

Project FeaturesFully Assembled project kitSlide switch on/off control on boardIC555 & LM358 based circuitLaser Light & LDR Sensor IncludedTwo Reflective Mirrors IncludedDC Buzzer interface9V Battery IncludedIncludes Storage Box & Project Document

PCB DOES NOT CONTAIN ANY LOGO OR TRADEMARK, Hence can easily be used for school/college project purposes

LDR BASED STREET LIGHT CONTROL DIY PROJECT ASSEMBLED KIT
BriefThe project is a fully assembled kitBased on light conditions the Street Lights could be controlled using LDR.Under light conditions the Street Lights will turn off and under dark conditions the Street Lights will turn on.

Project FeaturesFully Assembled project kitSlide switch on/off control on boardTransistor based circuitSeries of White LEDs as Street Lights9V Battery IncludedIncludes Storage Box & Project Document

PCB DOES NOT CONTAIN ANY LOGO OR TRADEMARK, Hence can easily be used for school/college project purposes