Innovative Engineers

Bavdhan, Pune, Maharashtra

Storage Tanks - Horizontal & VerticalCapacity - 1 KL - 100 klMOC - IS 2062, SA 516 , SS 304, SS 316, Lining - Rubberlining, Painting - Epoxy Other - As per client requirement.

Sh ell & Tube Type Heat Exchangers in CS, SS & Alloy Steel Material from 0.5 - 300 sq m Area With welded, expanded Tubes.

we are a prominent manufacturer, exporter and supplier of skid mounted chemical dosing system. the skid mounted chemical dosing system has been manufactured using technologically advanced machinery and equipment. the skid mounted chemical dosing system is stringently tested on quality parameters by the experts. use

• helps in smooth and efficient dosing through direct connection

material of construction

• non-return valve
• strainer, piping
• motorized agitator
• level gauge with protector
• dissolving basket
• dosing pump with motor
• pulsation dampner
• pressure gauge
• pressure relief valve

We bring forth highly impressive limpet coil vessel to our valuable clients. The limpet coil vessel is manufactured using high grade components. The limpet coil vessel is used to conduct chemical reactions under pressure, temperature, cooling or at atmospheric conditions. We have acquired high appreciation for our well designed limpet coil vessel. ideal forstirring, mixing, and processing the liquids at a pressure and temperature.

Designed to hold gases and liquids, our Pressure Vessel is widely appreciated for its quality and durability. The Pressure Vessel is designed using technologically advanced machinery. We offer the Pressure Vessel at customized facilities in order to meet the requirements of the clients. The Pressure Vessels can be availed at pocket friendly prices from us.

Why Our Pressure Vessel?

• Easy to install
• Withstand heat and stress in extreme conditions
• Robust construction
• Durable

Technical Specifications

• Capacity : 0.5 KL to 50 KL
• Material of construction : SS, CS, Alloy Steel, Cladded
• Thickness : 3 mm to 40 mm
• Diameter : 0.35 M to 4.5 M

we excel in providing sand filter to our customers. The sand filter is necessary for purifying water thus prevent against water borne diseases. The sand filter is manufactured from high grade material to assure their optimum quality. Our sand filter matches up with the requirements to match up with the needs of the customers. why our sand filter?

• well designed
• low maintenance
• long lasting service
• economically priced

used for

• water purification

We are offering vacuum drying autoclave. we are engaged in providing vacuum drying autoclave to our esteemed clients. The vacuum drying autoclave has been manufactured using high grade material. Our vacuum drying autoclave matches up with the international standards. In order to match up with the requirements of the customers, we provide the vacuum drying autoclave as per the customized specifications. used for

• drying and removing moisture from transformers

available with

• 15 tons capacity

Capacity - 0.5 m3 - 15 m3MOC - IS 2062, SA 516 , SS 304, SS 316Working Pressure - 7 kgcm2 , 12 kg cm2 Other as per clients requirement.Minimum Order Qty - 1

Catering to the needs of the clients, we bring forth air receiver tanks. The air receiver tanks have been manufactured from high grade material. We have acquired high appreciation from the clients for our air receiver tanks. The air receiver tanks can be availed at pocket friendly prices from us. functionhelp in eliminating pulsations during discharges and act as storage vessels during intervals when demand for air exceeds the capacity of the compressortechnical specificationsavailable in both horizontal and vertical mountingsdesigned as per the design code is: 2825range between 50 liters and 10, 000 literscapacity : 0.1 m3 to 100 m3

We are offering falling film evaporators. we are engaged in providing the falling film evaporators to our valuable clients. We manufacture these falling film evaporators as per high industrial standards. Our falling film evaporators are tested on various parameters thus assure flawless functioning. Our falling film evaporators can work even at low temperature differences between heating media and boiling liquid. used to

• concentrate solutions, especially with heat sensitive components

features

• in falling film evaporators the liquid product usually enters the evaporator at the head of the evaporator
• the product and the vapor both flow downwards in a parallel flow
• this gravity-induced downward movement is increasingly augmented by the co-current vapor flow
• the separation of the concentrated product from its vapor is undergoing in the lower part of the heat exchanger and the separator
• the product is evenly distributed into the heating tubes
• a thin film enters the heating tube and it flows downwards at boiling temperature and is partially evaporated
• in most cases steam is used for heating the evaporator
• the falling film evaporators must be designed very carefully for each operating condition; sufficient wetting (product film thickness) of the heating surface by liquid is extremely important for trouble-free operation of the plant
• if the heating surfaces are not wetted sufficiently, dry patches and incrustations will occur; at worst, the heating tubes will be completely clogged
• in critical cases the wetting rate can be increased by extending or dividing the evaporator effects, keeping the advantages of single pass (no recirculation of product) operation
• area : 0.1 m2 to 30 m2

Catering to the needs of the clients, we bring forth highly efficient chemical reactor. Our chemical reactor has been manufactured from high grade components. These chemical reactors are used for conducting reactions at increased temperature and pressure. Our chemical reactor is high on demand in the national and international market. why our chemical reactor?robust constructionleak prooflong service lifelow maintenanceapplication areaschemical industrypharmaceutical industryagro-chemical industry

we are engaged in providing distillation columns to our valuable clients. The distillation columns are nothing but heat integrated distillation columns. We employ high grade metal for the manufacturing of these distillation columns. In order to match the pockets of our clients, we offer these distillation columns at market leading prices. attributes

• highly durable
• low maintenance
• high functionality
• sturdy construction

technical specifications

• max. Dia : 2500 mm
• max. Height : 30 mtr
• moc : ss 304, 316, duples

we are instrumental in providing tube heat exchangers to our valuable clients. We provide the tube heat exchangers in different diameters and lengths to meet the requirements of the customers. We provide the tube heat exchangers in u-tube design for liquid to liquid and steam to liquid applications. ideally used

• for transferring the heat in industrial process applications

technical specifications

• area : 0. 5 m2 to 700 m2
• tubes : 19. 05 mm od to 114. 3 mm od
• tubes material of construction : sa179, bs3059, astm a312 tp304 316
• maximum diameter : 2500 mm
• maximum length : 12 m

we are offering industrial agitators manufacturer, exporter and supplier. We employ high grade material for the manufacturing of our industrial agitators. The industrial agitators is useful in mixing, homogenizing, gas dispersion and gentle stirring of low viscous & high viscous liquids. Our quality controllers check the industrial agitators for their flawless functioning. salient features

• high efficiency hydrofoil impellers to ensure better flow / mixing with minimum power consumption as that of traditional impellers
• wide spanning range of impellers enable to select the optimum element for each individual application
• sweep dia : 0.5 mtr to 3.5 mtr

used in industries such as

• chemical
• polymer
• paint
• food
• mineral

we are engaged in providing double cone blenders that consist of cylindrical shell rotating on a horizontal axis that is mounted on a sturdy mild steel frame. The double cone blenders are used for mixing powder and granules. The double cone blenders can withstand rotational load of the mill charged and material to be processed. The double cone blenders have openings for easy loading and discharging. The total working capacity of the mill is as per 50% of the container capacity. The double cone blenders are made from high stainless steel and two-third volume of the cone blender is filled. The powder can be loaded through a wider opening and discharged through a mucon valve or a slide valve. applications

• pharmaceutical industry
• food industry
• chemical industry

capacity

• 150 liters onwards

MOC - MS, SS, Alloy SteelsCapacity 0.5 KL - 30 KLType - Vertical or HorizontalOther - As per Client Requirement

Skid Mounted Pilot or Mini Plants for chemical processes in SS 316, SS 304, Duplex Material as per client requirements