Our Products
Test Kits
2 Products availableOur offered Product range includes Digital Boiling Point Innovative, ROTARY VACUUM EVAPORATED, Anesthesia Equipments - AMBU BAG SILICONE RESUSCITATOR, Marshall Test Stability Machine and Viscometer.
The Innovative Digital Boiling Point instrument is equipped with a magnifier to observe the tips of the melting point capillaries holding the samples to be tested. Instead of the conventional glass thermometer, it is fitted with highly sensitive PT-100 sensor and the temp. is indicated on a digital readout. A press button is provided which is to be pressed when the desired change is noticed in the sample under test. The temperature reached at that stage is then held on the readout, till the `CLEAR' button is pressed. The readings obtained are therefore quite accurate, as the operator can concentrate on the visual observation of the sample without looking on to the thermometer.
We are leading manufacturer of Vacuum Ovens in India are our Ovens are available in a wide range for all industrial applications. Available in a number of models, our assortment ofvacuum ovensare perfect for the followingoperations: DryingBakingCuringPreheatingStress relievingAnnealingSintering
Our Vacuum Ovens are double walled, inside of stainless steel, outside of mild steel. Cylindrical Inner chamber and the gap between outer chamber and inner chamber is filled with glass wool insulation. The door of Vacuum Oven has a thick toughened glass window of 7 dia that gives excellent visibility into the chamber and the same is sealed with Rubber gasket. Digital Temperature Controller, Vacuum gauge, thermometer pocket, stainless steel shelves with holes also provided with Vacuum Oven. Two valves provided for exhaust and entry of air. Electric heating by elements placed around the chamber. Temperature range 50 C to 150 C. Approximate vacuum achievable 740 to 760mm.
MODEL | DIAMETER | DEPTH |
INNO-77 |
200 |
260mm |
INNO-88 |
250 |
300mm |
INNO-99 |
300 |
300mm |
Innovative Hand Operated Sieve Shaker is light, portable but sturdy Sieve Shaker suitable for bench mounting. The side to side movement to the carrier which can take upto 7 sieves of 15 cm or 20 cm diameter is through a train of gears operated by a hand wheel. A heavy fly wheel ensures smooth operation. Supplied without sieves.
The Rotary Vacuum Evaporated apparatus consists of an evaporated flask rotated by non sparking induction motor in a heating water bath. Vacuum distillation of solvent at high and low temperature is achieved quickly and efficiently by use of a fixed speed motor, which prevents foaming and bumping of the liquid (solvent) into the evaporating flask and also distillation under controlled atmosphere. The evaporating flask is pear shaped to give a large surface area of evaporation and is clamped to a glass duct which goes through the drive unit and protrudes about 120mm into the condenser. The condenser is fitted with standard joint at the top and the bottom for receiver flask. The unit is fitted with a quick action jack.
Innovative Trolley/Tray Drying Ovens are provided with trolleys for placement of products. These Trolley/Tray Drying Ovens are ideally suited for variety of thermal applications, such as component testing. These ovens are used for variety of purposes. Materials can be loaded and unloaded easily. In Trolley ovens, trolley with shelves are used for placement of product. In this oven, doors on two sides can also be provided and two trolleys can be used to increase the production and save the batch timings. Temperature range upto 3000C.
Innovative Mortuary chamber is a double walled cooled unit. Outer body of mortuary chambers are constructed out of thick steel/ aluminum sheets, painted with long lasting stove enamel or elegantly powder coated. The inner chamber is made of heavy gauge stainless steel sheet of SS-304 grade or anodized aluminum sheet or G.I. (as per the customers requirements). The 100 mm gap between the walls is filled high grade poly uretherane insulation, which ensures maximum thermal efficiency.The doors are connected by very sturdy chrome plate hinges and fitted with hard chrome plated lubricated latches for opening the door. The unit is provided with very sturdy castors. ISI marked high end CFC free compressors of Kirloskar/Tecumseh make, conforming to latest international standards and guidelines used for cooling.Temperature range of our standard mortuary chamber models are 2C to 8 C. / -15C to + 10C. +/- 1C Innovative Mortuary Chambers are made for single body, double, triple, four and six bodies.
Ultrasonic Cleaning is a safe and efficient modern procedure which ensures perfect cleaning within the shortest time possible. It has many advantages over ordinary cleaning methods. Ultrasonic Cleaners can remove even the most tenacious deposits from parts which would be difficult to reach by hand, it also reduces the risk of injury or infection which may occur during manual cleaning.
Ultrasonic Cleaning is a safe and efficient modern procedure which ensures perfect cleaning within the shortest time possible. It has many advantages over ordinary cleaning methods. Ultrasonic Cleaners can remove even the most tenacious deposits from parts which would be difficult to reach by hand, it also reduces the risk of injury or infection which may occur during manual cleaning.
Innovative Ultra sonic Cleaners used for critical cleaning areas used in many industry like chemical laboratories, pharmaceutical, Hospitals (laparoscopic), Electronic, Ultrasonic Dental Cleaning, Medical, Defense , Aerospace, Automobile , Auto Parts Hotel , Plating. Jewelry Industries
customized Ultrasonic Cleaning Equipments / Parts Washers / Alkaline Cleaners / Multi Stage Ultrasonic Cleaners Vapour, Disintegrator, Degreaser, according to the specific customer requirements.
Model | Capacity Lt. | Size (LXWXH) |
Innovative-50 |
1.5 |
7” X 4” X 3” |
Innovative-60 |
2 |
8” X 4” X 4” |
Innovative-100 |
3.5 |
9” X 6” X 4” |
Innovative-150 |
5 |
10” X 6” X 5” |
Innovative-200 |
6.5 |
12” X 6” X 6” |
Innovative-250 |
9 |
12”X 8” X6” |
Innovative Laboratory Magnetic Stirrers are useful for processing and sterilizing purposes. Some of the structural features of our products are:
Automatic External CalibrationMultifunction Weighing UnitsA built in under hook for below weighingEasy to read VFD DisplayDensity measurement for solid and liquidStandard RS 232 C InterfaceHigh Resolution, Quick Weighing, Accurate ResultBased on E.M.F.C. TechnologyS.S.Weighing Pan, Level Indicator, Adjustable FitTare range upto max. Capacity of the Balance.
Automatic External CalibrationMultifunction Weighing UnitsA built in under hook for below weighingEasy to read VFD DisplayDensity measurement for solid and liquidStandard RS 232 C InterfaceHigh Resolution, Quick Weighing, Accurate ResultBased on E.M.F.C. TechnologyS.S. Weighing Pan, Level Indicator, Adjustable FitTare range upto max. Capacity of the Balance
MODEL |
CAPACITY |
READABILITY |
PAN SIZE (mm) |
INN 100 |
100 gm |
0.001 gm |
80 ø |
INN 200 |
200 gm |
0.001 gm |
80 ø |
INN 300 |
300 gm |
0.01 gm |
120 ø |
INN 600 |
600 gm |
0.01 gm |
120 ø |
INN 1000 |
1000 gm |
0.01 gm |
120 ø |
INN 3000 |
3000 gm |
0.1 gm |
180 x 170 |
INN 6000 |
6000 gm |
0.1 gm |
120 x 140 |
MODEL | CAPACITY | READABILITY | PAN / PLATFORM |
INN 3 |
3Kg |
0.1gm |
220 X 270 mm |
INN10 |
10Kg |
0.5gm |
220 X 270 mm |
INN 31 |
30Kg |
1gm |
220 X 270 mm |
INN 30 |
30Kg |
2gm |
220 X 270 mm |
The Innovative Gyratory Motorised Sieve Shaker carries upto 7 sieves of 20 diameter. The shaker is driven by a h.p. electric motor through a reduction gear. The sieve table does not rotate but is inclined from the vertical axis and the direction changes progressively in the clockwise direction. By removal of a stop-pin fixed to below the table, the shaker can have a rotary motion. In addition to the gyratory motion of the table, there is an upward and downward movement ensuring that each square cm of the sieve is utilised. The whole gear mechanism runs in an oil bath.Suitable for operation on 230 volts, 50 cycles, single phase, A.C. supply. Supplied without sieves.
Optional Extras :
Adaptor for 30 cm diameter sieves.Time switch, 0-60 mins in 5 min graduations.
We are leading manufacturer of wide range of general purpose bench top laboratory muffle furnace and industrial furnace, especially built for laboratories and production industries where accuracy and safetyare foremost requirements. Our Muffle furnaces are easy to install and operate. Our Muffle Furnace are designed for maximum temperature 950C to 1500C and working temperature of 900C to 1400C. Controlled by sunvic energy regulator, outer body is made of thick mild steel sheet, with gray enamel paint. The apparatus is complete with pyrometer, thermocouple and a silver fuse wire is also provided for the safety of elements in case temperature rises above maximum.
Vertical Autoclave (High pressure with radial locking system)
INNOVATIVE Vertical Autoclave with (Radial Locking System) automatic controls and safeguards to manage daily sterilization in the Hospitals and Clinics. Vertical Autoclave is made out of total medical grade stainless steel (16 Gauge) and all part also made of S.S. and top lid is die pressed 6mm tick solid S.S. plate and polished for the elegant appearance. This Autoclave is equipped with Radial LockingSystem as well as low water level cut off system. When water level falls down the required level, the equipment automatically disconnects power supply to protect the elements from burning out and it is dry fitted with water gauge glass for water level indication, water inlet and outlet valves. The Vertical Autoclave has pressure control device incorporated. It economizes power consumption as it cuts off the power supply to heaters when the pressure is achieved at 20psi and re-energies the heating elements when pressure falls below the set point. The Vertical Autoclave front panel is provided with working pilot lamps, pressure gauge and timer for sterilizing, switch for selection process and sterilization and two Alarm buzzers to indicate the ending of the process and other one is for indicating the completion of sterilization.
Vertical Autoclave available in following capacities :
Item Code | Size | Capacity |
1044 A |
12" X 20" (300 X 500 mm) |
37 Ltr |
1044 B |
16" X 24" (400 X 600 mm) |
80 Ltr |
1044 C |
18" X 36" (450 X 900 mm) |
150 Ltr |
Silicone Vacuum Cup Size: 50, 60, 70 MM Silicone Vacuum Cup which is made of Medical grade silicone Rubber with Metal Valve Relief for Pressure. Available Sizes: 50, 60, 70 MM
Vacuum Extractor Our Silicone Vacuum Extractor. is both oval and round-neck cup. Our Vacuum Extractor helps to prevent and treat many common diseases.Manual vacuum Extractor with Glass Bottle & Metal Cap with three Metal Cups Size: 50, 60, 70 MM & Pump Metal with Box Completes.
Guedel Pattern Airways We offer Guedel Pattern Airways to achieve extra soft surface finish. The integral hard bite block avoids airway occlusion and biting of the tongue. Colour coded for easy identification of sizes. E.T.O. Sterile & Pyrogen Free
Silicon Resuscitator (Adult Autoclave able) Silicone ResuscitatorSize: Adult - 1500 ML (Capacity) Silicone Resuscitator is Complete in pouch with face Mask, Oxygen Tube, Reservoir bag. CE approved product.
Silicon Resuscitator (Child Autoclave able) Silicone Resuscitator Size: Child - 500 ML (Capacity). Silicone Resuscitator is Complete in pouch with face Mask, Oxygen Tube, Reservoir bag. CE approved product.
Resuscitator Black Rubber Black rubber Set Containing Self Inflating double endedArtificial Resuscitator for infant and child. This infant resuscitator have oxygen reservoir bag with valve
Anti Static Face Mask We offer Anti Static Face Mask made ofblack rubber with following features: Air filled cushion to provide safety and comfortable use.Suitable use in respiratory care of anesthesia and resuscitator.Body with antistatic property. Excellent grip.
Bain Circuit Set We offer a variety of anesthesia resuscitation accessories that include reservoir bag, re-breathing bag, corrugated breathing tube plastic and corrugated breathing tube rubber, which are manufactured with latest technology.
The Innovative Laboratory Pulveriser is a disc type grinder designed for grinding virtually any material to produce a fine mesh sample in one operation. The pulveriser is adopted for use in assay offices, metallurgical, aggregate, quarry, chemical and industrial laboratories. It is a self-contained grinder furnished with rotating disc having a planetary movement in a vertical plane. This feature gives added life to the wearing parts and delivers a product of uniform fineness. The pulveriser will reduce a 1 pound sample of quartz type material to 100 mesh above in 1 minute. Maximum feed size 6 mm.
Grinding is done between two discs, one of which is stationary and the other revolving eccentrically at high speed. The apparatus is supplied with heat treated disc 175 mm in diameter. Adjustment for size of product may be made by use of convenient hand wheel when the machine is in operation or at rest. A self-locking device holds the hinged grinding chamber in place and affords easy and quick access to the grinding chamber for removal of ground samples and for cleaning. The pulveriser is supplied with a 3 h.p. electric motor. V-belt drive. Working on 440 volts, 3 phase A.C.
Innovative Deep Freezer provides safe storage of products at uniform present temperature up to 40C. All controls such as temperature display-cum-controller, main switch, pilot light for power and over temperature/power failure alarm etc. are easily accessible. Exterior cabinet is made of M.S. Sheet & finished with epoxy coated paint. Insulation is provided in between inner & outer walls. The inner chamber is made of stainless steel, highly polished. SS trays are provided for accommodating plasma bag. Innovative Deep Freezers are having dependable compressor hermetically sealed for cooling system. Air circulation ensures uniform temperature.Suitable to work on 220 Volts, 50 Hz, single phase, AC supply.
MODEL | WORKING CAPACITY | WIDTH | DEPTH | HEIGHT | CAPACITY |
INN-6341 |
4 Cu ft. |
610 mm |
380 mm |
480 mm |
116 Ltrs |
INN-7451 |
6 Cu ft. |
760 mm |
405 mm |
560 mm |
171 Ltrs |
INN-1462 |
10 Cu ft. |
1015 mm |
455 mm |
610 mm |
280 Ltrs |
INN-1463 |
12 Cu ft. |
1200 mm |
455 mm |
610 mm |
336 Ltrs |
This Innovative Dehumidifier is made from thick sheet and angle frame rugged welded with removable casting panel The unit is mounted on castor wheels and provide a water collecting tank. All compact arrangement occupies minimum space. This vertical models save valuable floor in a conditioned room. Air intake & discharge is on the same side of equipment and the unit is provided with a discharge grill to direct the flow of air horizontally and vertically as desired. KIRLOSKAR make compressor AUE make motor complete with mini starter and humidistat. Suitable to work on 220 Volts A/C 50cycles.
Innovative Density Baskets are used for specific gravity and water absorption test of aggregate. The Density basket is used in conjunction with a suitable electronic balance, a specially designed robust frame to support the electronic balance and water tight container. The Density basket is of 20cm dia x 20cm high fitted with galvanized wire mesh of 6.3mm with handle for suspending it from the balance.
Innovative Heating Mantle is widely demanded by many of the laboratories as these are very effective in the heating of chemical at the desired rate without any hassle. The electric heating mantle has an indicator and a regulator that helps us to keep a check on the temperature needed.
Specifications:
Voltage : 230 Volts AC SupplyOuter : Made of AluminumInner : Fiber Glass Yarn ThreadInsulation : Glass Wool
The Innovative Le Chatelier Mould is an apparatus which is used for determination of dry density of compaction. The Sand Pouring Cylinder 115 mm dia is fitted with conical funnel and shutter 3 liter capacity, cylinder calibrating container 100 mm dia x 150 mm ht, a metal tray 300 mm x 300 mm x 40 mm with 100 mm central hole.
Innovative Cube Moulds are available in varied sizes for cube, beam & cylindrical moulding which are required for compressive strength testing. Our premium moulds are made of high quality metal. These are strong in design and enough to resist distortion & retain their shape and size even under rugged conditions. Our Cube Moulds are supplied complete with base plate.
Innovative Digital Colony Counter is designed for rapid and accurate counting of bacterial and mould colonies. It has a wide application in scientific laboratories, pharmaceutical industry etc.
Our Digital Colony Counter is very easy to use and requires less maintenance.
Pyconmeter is useful to determine specific gravity of clays, sand and gravel of size smaller than 10mm. Comprises a 1kg glass jar with brass cone, locking ring and rubber seal.
Innovative Viscometer is Rotational Digital Direct Reading Viscometer to measure absolute viscosity of Newton Liquids as well apparent viscosity of non Newton liquid featured by high flexibility reliable Test result, easy operation and good appearance.
1. Pregnancy Testing Strips2. Pregnancy Testing Cards3. HBsAg Testing Cards4. HIV Testing Cards5. HCV Testing Cards6. Malaria Antibody(Pf/Pv) Cards7. Malaria Antigen(Pf/Pv) Cards8. Dengue Testing Cards9. TB Testing Cards10. Typhiod Testing Cards11. Syphills Testing Cards12. Chickungunia Testing Cards13. Laptosapira Testing Cards14. Kalazar Testing Cards15. Troponin I Testing Cards