Innovative Instruments

Vikas Puri, Delhi

The California bearing ratio (CBR) is a penetration test for evaluation of the mechanical strength of road sub grades and basecourses. The test is performed by measuring the pressure required to penetrate a soil sample with a plunger of standard area. The measured pressure is then divided by the pressure required to achieve an equal penetration on a standard crushed rock material.

Compression testing machines are used to determine the compressive strength of concrete cylinders, cubes, and masonry blocks. We Innovative Instrument are leading Manufacturer of Compression Testing Machine. 2000 KN (200 Tons) Capacity (Two Pillar Model) Electrically Operated fitted with dual display i.e. load gauge 0-2000 KN x 10 KN Division and Digital Load Indicator 2000 KN x 1 KN Division. The micro switch fitted in load gauge and relay contact in digital load indicator to protect the machine from overloading. The machine is suitable for operation on 440V, 3-phase, Ac supply.

The designing of our Digital Tensile Testing Machine is done according to the ASTM D-638 along with confirming to other quality standards. Our range of Digital / Computerized Tensile Testing Machine is offered as semi-digital, fully digital and as per the citations of our clients. These are used to perform tests such as Flexural and Compression test by adjusting the grip accordingly. Along with research activities, following are some of the materials which can be tested on by our Digital Tensile Testing Machine: Composites and rigid plasticsLow force materialsPaperFilmsRubberTextiles

Innovative Brinell Hardness Testing Machineis ideal for production testing. The Brinell Hardness Tester is designed to measure Hardness of casting, forgings, other metals and alloys of all types, hard or soft, whether flat, round or irregular in shape. The unmatched performance of the Brinell Hardness Testing Machine in respective application has made the Hardness Testing Machine an ideal choice of various industries. Components & Working Of Brinell Hardness Testing MachineAn 'Optical Device' with 14x magnification is provided in front to project diameter of ball impression on glass screen coupled with a micrometer measuring system with 0.01 mm accuracyThe indenter swivels and projects diameter of ball impression instantaneously after unloading operation.

INNOVATIVE Universal Testing machines aredesigned and built to conduct tests on materials under tension, compression bending, and transverse and shear loads. The Innovative UTMs are used for determining the Tensile, Compression, Shear Strength and elongation of variety of raw materials such as metals, rubber, leather , fabric, plastics, Belts , wires etc.

They are based on constant rate of traverse principle in which one end of the test specimen is held in a stationary grip, while the other end is made to move at a known fixed speed. The load exerted on the stationary grip indicated by a digital load indicator. The controller is microprocessor based and has the facility of over load protection, peak hold and auto calibration. The load directly indicated in kilograms or Newton or KN.

Features:

-> Loading accuracy as high as 1%.

-> Training roll autographic recorder supplied as standard to enable study of the behavior of materials.

COMPRESSION TESTING MACHINE compression testing machine manufacturer, compression testing machine manufacturer in india, compression testing machine manufacturer in delhi , horizontal autoclave manufacturer, blood cell counter manufacturer, hot air oven manufacturer, rockwell hardness testing machine manufacturer, humidity test chamber manufacturer Compression testing machines are used to determine the compressive strength of concrete cylinders, cubes, and masonry blocks. We Innovative Instrument are leading Manufacturer of Compression Testing Machine. 2000 KN (200 Tons) Capacity (Two Pillar Model) Electrically Operated fitted with dual display i.e. load gauge 0-2000 KN x 10 KN Division and Digital Load Indicator 2000 KN x 1 KN Division. The micro switch fitted in load gauge and relay contact in digital load indicator to protect the machine from overloading. The machine is suitable for operation on 440V, 3-phase, Ac supply.Compression Testing Machine Electrically-cum-hand operated. The machine embodies an Hydraulic system designed to meet the requirement of Indian Standards Specification 516-1959 for compression tests on concrete Cubes upto 5cm x 5cm x 5cm 7.06cm x 7.06cm x 7.06cm, 10cm x 10cm x 10cm and 15cm x 15cm and also concrete Cylinders upto 10 x 20cm, 15 x 30 cm height.

Innovative Impact Testing Machine is specifically designed for conducting Izod & Charpy Test. Impact Testing Machine is suitable for testing raw material specimen as well as finished components.

Components & Working Of Impact Testing Machine

• Pendulum of the machine is mounted on antifriction bearings
• Contains two starting positions, the upper one for Charpy and the lower one for Izod testing
• The Pendulum on release swings down to break the specimen and the power absorbed in doing so is calculated as the variation between the height of drop before rupture & height of raise after rupture of the test specimen
• The output is read from the maximum pointer on the dial scale

Offered With

• Self centering tong
• V - notch milling cutter
• U - notch milling cutter
• Caliper gauge for checking V notch for Izod & Charpy
• Depth notch gauge including V & U notch, angle & radius

We Innovative Instruments Leading Manufacturer of Compression Testing Machine 2000 KN (200 Tons) Capacity (Two Pillar Model) Electrically Operated fitted with dual display i.e. load gauge 0-2000 KN x 10 KN Division and Digital Load Indicator 2000 KN x 1 KN Division.