Innovative Technologies

Kothamangalam, Ernakulam, Kerala

A turbine flow meter is used for volumetric total flow and/or flow rate measurement and has a relatively simple working principle. The angular (rotational) velocity of the turbine rotor is directly proportional to the fluid velocity flowing through the turbine. Turbine Flow Meters are useful for liquids & gases in general industrial application. Suitable for hygienic application.

The pickup coil senses the spinning motion of the rotor inside the pipe & converts it into a pulsating electrical signal. Summation of the pulsating electrical signal is directly related to the total flow. The frequency is linearly proportional to flow rate which is converted to mA signal by electronic circuitry. Flow rate Indicator / Totalizer / Transmitter and Controllers are available in Local/Remote and Panel Mounted Options.

The measuring element of an oval gear meter consists of two toothed precision oval wheels which are driven by the fluid passing through the unit. The number of revolutions is an exact measure of the volume.

The positive displacement flow meter with mechanical display, designed tocover of industrial fluid measurement application. It is ideally suited to applications requiring accurate dispense quantities. Measurement of very low flow rates, small batch size, viscous products and non-conductive liquids are all ideal uses for this meter. Because this meter does not require flow conditioning, no straight piping run are required, so it can be used in installations where space is limited without effecting performance.

Features :

• Mechanical display, easy to read, aluminum body, PPS rotors, light weight
• 4 digit subtotals can be set to 0, 6 digit total
• Compact size, easy maintenance, low pressure drop

Maintenance and recalibration requirements are minimal because of the lacknof moving parts. Often, the gear meter is selected over the Coriolis because of its accuracy and longevity in harsh environments where the Coriolis is susceptible to interference from pressure or temperature changes and general wear.

An ultrasonic flow meter is a type of flow meter that measures the velocity of a fluid with ultrasound to calculate volume flow. Using ultrasonic transducers, the flow meter can measure the average velocity along the path of an emitted beam of ultrasound, by averaging the difference in measured transit time between the pulses of ultrasound propagating into and against the direction of the flow or by measuring the frequency shift from the Doppler effect. Ultrasonic flow meters are affected by the acoustic properties of the fluid and can be impacted by temperature, density, viscosity and suspended particulates depending on the exact flow meter. They vary greatly in purchase price but are often inexpensive to use and maintain because they do not use moving parts, unlike mechanical flow meters.

Features :

• 4-line LCD display with flow rate; totalized and signal condition
• The flowmeter is designed for high accuracy of +/-1.0%
• Small size (200*92*32mm); light-weight(538g)
• Wide range; velocities(0.01-+/-32 m/s)
• Ni-MH battery life for upto 10 hours continuous operation.
• Transducers for pipe sizes of 13 to 6000 mm
• Transducers include the magnetic device which can install on metal pipe without mounting belt.
• Date logger which records flow rate, date, total flow, signal condition, etc.
• Response Time: less than 1 second.

Sensor :

• S Type 15mm100mm (1/2″4″)
• M Type: 50mm700mm(2″28″)
• L Type: 300mm6000mm(12″240″)