We are dedicated to the manufacturing and trading of the wide array of safety light curtain for hand safety. Our products are hygienic, energy efficient, durable and easy to maintain. They are offered at competitive prices all over nation. Our clients can avail from us a complete range of Hand Safety Light Curtains, which is widely used to prevent the machine from any kind of interference. These are designed with utmost precision and perfection.Infra system offers safety light curtains 2. Outputs model are available.specificationsPower Supply : 12 - 24 Volts DCSupply Protection : Reverse PolarityOutput : PNP - NC Output Indications : Through LEDsChannel Indication : LED indication for each channel Response Time : 10 - 20 m secRestart : AutomaticNo of beams : 4, 6, 8, 10, 16, 24, 32 nos Beam By Pass : Provided in handbody protection modelsProtected Heights : 90 - 1710 mmPitch offered : 11 - 20 - 30 - 40 - 50 - 90 mm Adjustable Range : Up to 3 meters (Higher range available)Electrical Connections : Plug in Connector for Emitter & ReceiverStandard Cable length : 5 meters for emitter, 3 meters for receiver Operating Temperature : up to 55 Degrees centigradeFastening Modes : Back Slot with adjustable heightCross Section : 36 x 42 mmApplicable to : Directly work with PLCs ControllersSuitable for : Machines with quick emergency stop Application: Power Presses for Metal, Processing machines for Wood, Plastics, Leather, Rubber, Glass etc., Filter Presses, Folding or bending machines, Robots, Processing Lines and Welding Presses, Insertion Machines, Palletizers, Handling & Storage systems, Rubber molding machines, SPMs, Forging Presses

Features: Easy to install & may be mounted in any position with non-critical alignment between sensorsSwitches are provided for blanking by-passing individual channelsUnaffected by mains power fluctuations, also machine OFF if the screen is too dirty or oilyBarrier operates on cyclic scanning photo-electric infra-red techniquesVarious barrier range heights are available from covering 90 mm to 1710 mmHigher covering heights available upon requestUse of solid state components & special construction technique ensures that barrier is not affected by normal vibrations & shocks.For Sensors, connections are provided through plug in connectorsSelf-checking circuitry continuously monitors failure of any of the beam in the system and stops the machine if failure detectedLEO Indications are provided for status indication of each channelLEO indication for output and senseFlexible fixing arrangements to suit individual requirementIncreases productivity while maintaining required safety Sensor specifications: Power Supply : 12 - 24 Volts DCSupply Protection : Reverse PolarityOutput : PNP - NCOutput Indications : Through LEDsChannel Indication : LED indication for each channelResponse Time : 10 - 20 m s

Power Supply : 12 - 24 Volts DC Supply Protection : Reverse Polarity Protected Output : PNP or NPN NO or NC Output Indications : Through LEDs channel Indication : LED indication for each channel Response Time : On to Off : 10 - 15 m sec. Off to On : 50 - 100 m sec No of beams : 4, 6, 8, 10 , 16, 20, 16, 24, 32, 40, 48, 56, 64 Beam By Pass : Provided in handbody protection models Protected Heights : 90 - 2000 mm Pitch offered : 11, 20, 30, 40, 50, 90mm Adjustable Range : Up to 3 meters (Higher range up to 40 meters available) Standard Cable length : 5 meters for emitter, 3 meters for receiver Operating Temperature : Up to 55 Degrees centigrade Cross Section : 36 x 42 mm Electrical Connections : Plug in Connector for Emitter & Receiver Applicable to : Directly work with PLCs Controllers Protections : Output short circuit protected. Vibration Resistance : Amplitude : 0.75 mm (p) Freq : 10 - 55 Hzs, Rate : 1 Octave min Operating ambient Light : 500 Lux ( max.) when source is places opposite to receiver, > 3000 lux when source placed at an angle of 20 degrees Suitable for : Machines with quick emergency stop APPLICATIONS Safety Light Curatins are used for preventing of hand Finger body part while working at : Power presses for metal, processing machine for wood , plastics, leather, rubber, glass etc. Filter Presses, Folding or Bending machines, Robots, Precessing Lines and welding presses , Insertion Machines, Palletizers, Handling and storage systems, Rubber molding machines, SPM's, Forging Presses, Injection Molding machines etc,

Infra systems offers new generation Safety Light Curtains Safety Guards based on advanced micro controller technology. These are available in two types. Parallel Beam , and Cross Beam For the same protected height, Cross Beam Light Curtains are more sensitive as there are more number of active beams in the same area.Power Supply : 12 - 24 Volts DC Supply Protection : Reverse Polarity Protected Output : PNP or NPN NO or NC Output Indications : Through LEDs channel Indication : LED indication for each channel Response Time : On to Off : 10 - 15 m sec. Off to On : 50 - 100 m sec No of beams : 4, 6, 8, 10 , 16, 20, 16, 24, 32, 40, 48, 56, 64 Beam By Pass : Provided in handbody protection models Protected Heights : 90 - 2000 mm Pitch offered : 11, 20, 30, 40, 50, 90mm Adjustable Range : Up to 3 meters (Higher range up to 40 meters available) Standard Cable length : 5 meters for emitter, 3 meters for receiver Operating Temperature : Up to 55 Degrees centigrade Cross Section : 36 x 42 mm Electrical Connections : Plug in Connector for Emitter & Receiver Applicable to : Directly work with PLCs Controllers Protections : Output short circuit protected. Vibration Resistance : Amplitude : 0.75 mm (p) Freq : 10 - 55 Hzs, Rate : 1 Octave min Operating ambient Light : 500 Lux ( max.) when source is places opposite to receiver, > 3000 lux when source placed at an angle of 20 degrees Suitable for : Machines with quick emergency stop

We are dedicated to the manufacturing and trading of the wide array of safety light curtain for hand safety. Our products are hygienic, energy efficient, durable and easy to maintain. They are offered at competitive prices all over nation. Our clients can avail from us a complete range of Hand Safety Light Curtains, which is widely used to prevent the machine from any kind of interference. These are designed with utmost precision and perfection.Infra system offers safety light curtains 2. Outputs model are available.specificationsPower Supply : 12 - 24 Volts DCSupply Protection : Reverse PolarityOutput : PNP - NC Output Indications : Through LEDsChannel Indication : LED indication for each channel Response Time : 10 - 20 m secRestart : AutomaticNo of beams : 4, 6, 8, 10, 16, 24, 32 nos Beam By Pass : Provided in handbody protection modelsProtected Heights : 90 - 1710 mmPitch offered : 11 - 20 - 30 - 40 - 50 - 90 mm Adjustable Range : Up to 3 meters (Higher range available)Electrical Connections : Plug in Connector for Emitter & ReceiverStandard Cable length : 5 meters for emitter, 3 meters for receiver Operating Temperature : up to 55 Degrees centigradeFastening Modes : Back Slot with adjustable heightCross Section : 36 x 42 mmApplicable to : Directly work with PLCs ControllersSuitable for : Machines with quick emergency stop Application: Power Presses for Metal, Processing machines for Wood, Plastics, Leather, Rubber, Glass etc., Filter Presses, Folding or bending machines, Robots, Processing Lines and Welding Presses, Insertion Machines, Palletizers, Handling & Storage systems, Rubber molding machines, SPMs, Forging Presses

Features: Easy to install & may be mounted in any position with non-critical alignment between sensorsSwitches are provided for blanking by-passing individual channelsUnaffected by mains power fluctuations, also machine OFF if the screen is too dirty or oilyBarrier operates on cyclic scanning photo-electric infra-red techniquesVarious barrier range heights are available from covering 90 mm to 1710 mmHigher covering heights available upon requestUse of solid state components & special construction technique ensures that barrier is not affected by normal vibrations & shocks.For Sensors, connections are provided through plug in connectorsSelf-checking circuitry continuously monitors failure of any of the beam in the system and stops the machine if failure detectedLEO Indications are provided for status indication of each channelLEO indication for output and senseFlexible fixing arrangements to suit individual requirementIncreases productivity while maintaining required safety Sensor specifications: Power Supply : 12 - 24 Volts DCSupply Protection : Reverse PolarityOutput : PNP - NCOutput Indications : Through LEDsChannel Indication : LED indication for each channelResponse Time : 10 - 20 m s

Power Supply : 12 - 24 Volts DC Supply Protection : Reverse Polarity Protected Output : PNP or NPN NO or NC Output Indications : Through LEDs channel Indication : LED indication for each channel Response Time : On to Off : 10 - 15 m sec. Off to On : 50 - 100 m sec No of beams : 4, 6, 8, 10 , 16, 20, 16, 24, 32, 40, 48, 56, 64 Beam By Pass : Provided in handbody protection models Protected Heights : 90 - 2000 mm Pitch offered : 11, 20, 30, 40, 50, 90mm Adjustable Range : Up to 3 meters (Higher range up to 40 meters available) Standard Cable length : 5 meters for emitter, 3 meters for receiver Operating Temperature : Up to 55 Degrees centigrade Cross Section : 36 x 42 mm Electrical Connections : Plug in Connector for Emitter & Receiver Applicable to : Directly work with PLCs Controllers Protections : Output short circuit protected. Vibration Resistance : Amplitude : 0.75 mm (p) Freq : 10 - 55 Hzs, Rate : 1 Octave min Operating ambient Light : 500 Lux ( max.) when source is places opposite to receiver, > 3000 lux when source placed at an angle of 20 degrees Suitable for : Machines with quick emergency stop APPLICATIONS Safety Light Curatins are used for preventing of hand Finger body part while working at : Power presses for metal, processing machine for wood , plastics, leather, rubber, glass etc. Filter Presses, Folding or Bending machines, Robots, Precessing Lines and welding presses , Insertion Machines, Palletizers, Handling and storage systems, Rubber molding machines, SPM's, Forging Presses, Injection Molding machines etc,

Infra systems offers new generation Safety Light Curtains Safety Guards based on advanced micro controller technology. These are available in two types. Parallel Beam , and Cross Beam For the same protected height, Cross Beam Light Curtains are more sensitive as there are more number of active beams in the same area.Power Supply : 12 - 24 Volts DC Supply Protection : Reverse Polarity Protected Output : PNP or NPN NO or NC Output Indications : Through LEDs channel Indication : LED indication for each channel Response Time : On to Off : 10 - 15 m sec. Off to On : 50 - 100 m sec No of beams : 4, 6, 8, 10 , 16, 20, 16, 24, 32, 40, 48, 56, 64 Beam By Pass : Provided in handbody protection models Protected Heights : 90 - 2000 mm Pitch offered : 11, 20, 30, 40, 50, 90mm Adjustable Range : Up to 3 meters (Higher range up to 40 meters available) Standard Cable length : 5 meters for emitter, 3 meters for receiver Operating Temperature : Up to 55 Degrees centigrade Cross Section : 36 x 42 mm Electrical Connections : Plug in Connector for Emitter & Receiver Applicable to : Directly work with PLCs Controllers Protections : Output short circuit protected. Vibration Resistance : Amplitude : 0.75 mm (p) Freq : 10 - 55 Hzs, Rate : 1 Octave min Operating ambient Light : 500 Lux ( max.) when source is places opposite to receiver, > 3000 lux when source placed at an angle of 20 degrees Suitable for : Machines with quick emergency stop