Industrial Metal Components

Basni, Jodhpur, Rajasthan

ARC METAL SPRAY SYSTEM It Consists Of :

1. ARC SPRAY GUN MODEL IMC-95 : This Metal Spray System does not require gases like Oxygen, Acetylene/LPG. It require electrical power and compressed air for metal spray. The metal spray production will be high at lower operating and maintenance cost. The Deposited Coating is more dense and fine.
2. The Power Source : It is a DC current rectifier working on a 3-Phase, 380/415/440V, 50/60 Hertz power supply providing a voltage between 18 to 50 volts.
3. The Control Unit : It is normally mounted above the power source and carries the regulators and pressure gauges for the air supply to the spraying gun. One remote control is for stop the operation by operator is attached with control unit by cable.
4. The Twin Wire Spool Stand : The two wires for the two electrodes for the arc are supplied from two insulated wire spools mounted on a stand.
5. Gun Stand : It is for mounting and positioning of Gun in any direction.

Avail from us an exclusive array of Powder Spray Gun that sprays metal, carbide and ceramics powder with fast speed. Light in weight, the powder to be sprayed is fed through gravity by a metering valve. The Powder Spray Guns offered by us are high in quality as well as efficiency. Besides, the clients can avail these Powder Spray Guns at the leading industrial prices.

Known For

• Light weight
• Compact designing
• Superior finishes
• High charging efficiency
• Easy usage
• Rugged construction

Applications

• Journals : Where you need hard coatings with high wear resistance (Examples-Impeller Shafts, Armature Shaft).
• Bearings : Where you need a coating that is soft, it allows embedding of abrasive particles and affirms, so bearing surface can align (Examples-Bronze Bearings, Piston Guides).
• Dynamic Packing & Seal Areas : Where you need a coating that resists wear from packing material or mechanical seals and does not shorten the life of the sealing material (Examples-Pump Seals, reciprocating pumps plungers).

We are offering flame spray gun model. A. It sprays pure or alloyed metals such as zinc, aluminium, steel, brass etc. In wire form by using oxygen-acetylene/lpg gases flame and atomized by a blast of compressed air. b. It sprays fast and uses up to 1/8 (3.17mm) wire, irrespective of type of wire, the wire pulling power and high speed is assured. c. The gas head valve is designed for long service life and low maintenance. d. Wire feed can be stopped while the gun remains light. A simple quick action lever operates the wire grip mechanism to start and stop the wire feed instantaneously. e. An improved nozzle provides a uniform distribution of heat around the metallizing wire for maximum thermal efficiency and high spraying speed.

We are a leading manufacturer of an immaculate gamut of Flame Spray Gun that has single hand control for wire weed. Manufactured using high grade raw materials, this gun sprays fast and requires low maintenance. Known for longer functional life, our range of Flame Spray Guns are highly in demand in the market. Besides, customers can be eased by the availability of these Flame Spray Guns , Zinc Spray Gun at the most affordable prices

We are offering of a wide assortment of flame spray gun model imc-95 that sprays pure metals in a wire form. Our range of spray gun is widely appreciated by the clients owing to its high thermal efficiency and low maintenance. Besides, customers can avail these guns at the most affordable prices. a. It sprays pure or alloyed metals such as zinc, aluminium, steel, brass etc. In wire form by using oxygen-acetylene/lpg gases flame and atomized by a blast of compressed air. b. It sprays fast and uses up to 1/8 (3.17mm) wire, irrespective of type of wire, the wire pulling power and high speed is assured. c. The gas head valve is designed for long service life and low maintenance. d. Wire feed can be stopped while the gun remains light. A simple quick action lever operates the wire grip mechanism to start and stop the wire feed instantaneously. e. An improved nozzle provides a uniform distribution of heat around the metallizing wire for maximum thermal efficiency and high spraying speed.