Industrialjewels Pvt. Ltd.

Vidhyanagar, Bhavnagar, Gujarat

Sapphire is one of hardest known material with consistent quality available on a commercially economical scale.

With a hardness of 2300 HV it is much more harder then most of the known hard materials like ceramics, etc.

Saphire raw material is grown in a factory by Melting ultra pure Al2O3 at temperature higher then 2000 deg. Celcius to create a single crystal. This hard material has the ability to be polished to a very good surface finish.

The refractive index of sapphire is 1.760 which makes it very interesting to be used as a sapphire Ball lens for optical telecom products. In addition to the optical properties of Sapphire, it is also wear resistant and can withstand severe chemical corrosion.

In terms of visual appearance, Sapphire Ball can have a surface finish of No Scratch/Dig at 20x Magnification level (depending on the diameter of the Sapphire ball lens).

Our Sapphire raw material is produced by one of the oldest and most reliable supplier in the Swiss Industry.

Each and every Saphire ball is checked 100% for Size, Accuracy, Polish level and Cleaning before delivery.

All Sapphire Ball products are cleaned and packed in Class 100 clean room area.

Spinel is also a well known single crystal being used in the optical industry. The main advantage being that spinel is a cubic single crystal.

Spinel is a very hard material and its hardness is 8 on the mohs scale.

The refractive index of Spinel material is 1.727 which makes it very interesting to be used as a Ball lens for optical telecom products. In addition to the optical properties of Spinel, it is also wear resistant and can withstand severe chemical corrosion.

In terms of visual appearance, Our Spinel Ball can have a surface finish of No Scratch/Dig at 20x Magnification level (depending on the diameter of the Spinel ball lens).

Our Spinel raw material is produced by one of the oldest and most reliable supplier in the Swiss Industry.

Each and every Spinel ball is checked 100% for Size, Accuracy, Polish level and Cleaning before delivery.

All Spinel Ball products are cleaned and packed in Class 100 clean room area.

The most common ceramic ball material is alumina oxide Al2O3.

Alumina oxide balls resist corrosion and abrasion extremely well and maintain dimensional stability at temperatures up to 1734C (3180 F). Al2O3 balls may be used in many corrosive chemicals, salts and acids where a material that resists oxidation is required.

Applications where alumina oxide balls are used include chemical pumps, down-hole pumps, valves, bearings, gages, flowmeters, etc.

In terms of visual appearance, our ceramic Ball can have a surface finish of No Scratch/Dig at 30x Magnification level (depending on the diameter of the Ceramic ball lens).

Each and every Ceramic ball is checked 100% for Size, Accuracy, Polish level and Cleaning before delivery.

All Ceramic Ball products are cleaned and packed in Class 100 clean room area.

The high refractive index of Cubic Zirconia material makes it very interesting to be used as a Ball lens for optical telecom products. In addition to the optical properties of Cubic Zirconia, it is also wear resistant and can withstand severe chemical corrosion.

With higher coupling efficiency required for Transmitters and Receivers, the application of this cubic zirconia ball is becoming more and more popular.

The use of High Index material results in reduction of Back Focal Length, as a result the shorter distance simplifies fibre coupling.

We manufacture Cubic Zirconia balls in diameters ranging from 0.40mm to 3.0mm.

In terms of visual appearance, Cubic Zirconia Ball can have a surface finish of No Scratch/Dig at 20x Magnification level (depending on the diameter of the Cubic Zirconia ball lens).

Each and every CZ ball is checked 100% for Size, Accuracy, Polish level and Cleaning before delivery.

All cubic zirconia ball products are cleaned and packed in Class 100 clean room area.

We Manufacture Micro Ball range in diameter from 0.40mm to 8.0mm.

They can achieve a very high level of surface finish depending on the application of the product. Our Micro Ball can achieve a surface finish of Ra = 1.2nm.

In terms of visual appearance, Our Micro Ball can have a surface finish of No Scratch/Dig at 20x Magnification level (depending on the diameter of the Micro Ball).

The optical glasses used for making these Micro Ball are purchased from various renowned optical glass material makers likeOhara, Sumita, Schott, etc. which have a strict control on the nd and vd value of the glasses.

Micro Balls are used to improve signal coupling between Emitters, Fibres, Transmitters, Receivers and Detectors depending on the application.