Our Products
Voltmeter
2 Products availableDisplay Accessories
1 Products availableCalibrators And Monitoring Systems
1 Products availableTachometers
1 Products availableFlow Meters
1 Products availableBattery Accessories
1 Products availableElectric Control Panels
1 Products availableOur product range contains a wide range of Harmonic Indicator, counter measurement, Heater System Burnout Detector, Power Genius PRO and Harmonics Indicator
Alarm Annunciatoris a centralised model, which gives audio visual signals for the faulty processes. Latest models of annunciators are based upon microprocessor or micro controller circuitry, which ensures the maximum reliability as well as enhanced wide ranges of features and functionalities. We Offer Alarm Annunciator according to customers flexibility and needs.
Alarm Annunciators consist of a power supply unit SMPS, a programming unit CPU and other connections including fault contacts and facial display units. The blinking windows are generally acrylics, which are enlightened byLEDwith very low power consumption.
FEATURES
APPLICATION
Electrical control panel, power generation stationand process Automation
digital voltmeter vlt 9053 new approach to develop panel metering in sub stations, distribution panels , genset panels, pumps, motors, compressors and individual equipments, control panels and test benches and much more.
benefits
Digital Ammeter AMM 9043 new approach to develop panel metering in sub stations, Distribution panels , Genset Panels, Pumps, Motors, Compressors and Individual Equipments, Control panels and Test benches and much more.
Benefits
HAR 9000is a new approach in harmonic analysis which measures the value of current and voltage harmonics. THD in & of voltage and Current.Individual Harmonic Amplitude in % of voltage and current spectrum.Displays up to 31st harmonic and Total demand di stortion (TDD) display. Continuous harmonic monitoring Communication port.
features
ICD Power Factor Controller PFC 9070 is micro-controller based and assembled in 144 x 144 mm ABS plastic enclosure for flush mounting. It operates with voltage and current signals from suitable voltage and current transformers. It measures power factor and also the reactive power consumption of the load. With appropriate user program fed, it gives relay output signals to switch IN/OUT capacitor banks by contactors in a sequential manner to achieve the preset PF.
FeaturesICD Temperature Scanner Model No. SCN525 is capable to measure and control the Temperature upto 16 points. It accepts temperature sensors like RTDs, Thermocouple, mV and mA signals from Transmitters. The Scanner is completely user programmable like High/Low set point control action, Auto/Manual operation, Channel grouping, Hold, Pause etc.
The Scanner is a single board construction with the latest integrated circuit, so as to reduce component counts. Fast A/D converter is used for quick refreshing of all the channels input and output. Digital Zero / Span calibration eliminates trim pot adjustments and settings are made through key pad.
Maximum 4 relay outputs are given for Alarm & Trip controls. Channel grouping optional and control modes are programmable.The Scanner scans all the channels continuously on the background while displaying and generates the Alarm & Trip outputs after comparison with respective settings.
The Scanner has two modes of operation:1. Operator Level and, 2. Superior Level
The operator level permits channel display selection in Auto, Manual, Hold mode and Alarm acknowledge. Whereas supervisory level access, Alarm & Trip setting, group configuration, output delay adjustments, channel pause function, scan time etc.
Optionally, external relay box containing Max. 32 relays can be connected through serial link. The scanner is housed in 96 x 192 x 250 mm flush mounting enclosure.
FEATURES
APPLICATION
CNT 200 is a new approach to Process Measurement integrating Control I/Os which Counts of any motor or any devices which accepts input from Proximity, External Pulse inputs, photo electric switch. Our counter which acts as a controller device with respect to the input by providing two number of Relay's. EERAM is provided to store the Setpoints and constants.
ICD Microprocessor based Display unit which displays Value of Voltage, Current, Frequency, Temperature, Pressure, Flow. etc. Our display unit can be assembled from the range of 2' inch display to 12' inch size. These displays can be used as a monitoring cum controlling devices.
Zero Speed Switch is designed to detect the stalling of motors due to over load or chain delinking and conveyor belt stoppage. It is designed for accepting I/P Signal from non contact proximity pickup, Magnetic Pickup, Potential free NO Contact for DC/AC signal from Tacho generators. A Sensing Wheel with projection mounted on the shaft of the motor with proximity pickup or Magnetic reed switch gives a train of pulses. The signal is given to an electronic circuit which senses the duration between the pulses. If the interval between pulses is more than the set time and if it continues more than the time delay set, a relay de-energises. The circuit consists of signal conditioners, time interval detectors, power supply and Relay Circuit. Total system is housed in a compact dust proof ABS Plastic DIN Rail mounting Case.
a sequential timer, also referred to as a sequencer or sequence timer, will energize and de-energize multiple outputs over a period of time. the amount of time before each output is energized and the amount of time the output remains energized is variable. the outputs may be energized one at a time in order. for mechanical relay applications, the relay contacts of the first relay will close. then, after a set amount of time, the first relay's contacts will open and the second relay's contacts will close.
features
Signal Isolatoris a versatile for LT/HT application. It measures basic electrical quantity DC Voltage(75 mV /200 mV /1V /10V), DC Current(0-20mA/4-20mA), Resistance(500 Ohm, 1kOhm, 2kOhm, 5kOhm, 10kOhm) as input and convert it as Current(0-20mA, 4-20mA), Voltage(0-1V DC, 0-10V DC).The number of outputs provided two.
CNR230 is a new approach to Process Measurement integrating Control I/Os which Measures RPM value of any motors or Devices which accepts input from Proximity, Photo Electric, Magnetic Pickup, Potential Free Contact Limit, Pulse Inputs. Our Process Indicator which acts as a controller device with respect to the input by providing two number of Relay's. EERAM is provided to store the Setpoints and constants. Our Device can measure the RPM ranges from 0 to 99999 RPM with Accuracy of 0.01%.
UPC 5200 is a new approach to Process Measurement integrating Control I/Os which Measures input from Temperature(J, K, T, R, S, RTD, mA/Volt), Current(4-20 mA / 0-20 mA), Volt(0-10v / 1-5v). Our Process Indicator which acts as a controller device with respect to the input by providing two number of Relay's.
Thyristor capacitor switching module is designed to use for Real time power factor correction. It consist Dynamic switching Module (DSM- Electronic circuitry housed in Din rail mount enclosure) and Thyristor power stack (TSM 2 no Thyristors mounted on suitable heat sink). DSM is a microcontroller based design which generates trigger pulse to TPS and ensures the zero voltage switching of thyristor to achieve the transient free operation. DSM is common for all rating thyristor capacitor switching module and TSM varies according to the capacitor bank KVAr rating. Both DSM and TPS are interconnected with simple wiring.
Features
Majority of the loads in the industries are highly inductive in nature such as induction motors, welding equipments, arc furnaces andfluorescent lightings. There may be a few resistive loads for heaters and incandescent bulbs. Very rarely industries may have capacitive loads such as synchronous motors. Net industrial load is highly inductive causing a lagging power factor. If this poor power factor is left uncorrected, the industry will require a high maximum demand fromElectricity Board and also will suffer a penalty for poor power factor. These two factors of high kVA demand and penalty for poor factor will inflate the monthly Electricity Bill. Since Power Factor can be corrected to near unity there can be huge saving from the Electricity Bills. Standard practice is to connect power capacitors in the electrical network at appropriate places to compensate the inductive nature of the load.
FEATURES
ICD offers heater system monitoring and burnout detection. This product is designed to monitor status of the heater system with 3 phase star or delta connected loads. This instrument measure and monitors voltage, current, power and energy through external CTs and voltage detection; it can operate with 3 CTs or 2 CTs with true RMS measurement, CT ratio is settable in the meter itself. Under current setting will be given to study heater status and it will announce the heater burnout detection. This unit also shows the thyristor short circuit failure or open circuit failure.
This instrument displays voltage, current, power and energy by digital measurement and finds the heater burnout status and provide alarm through an external relay output.
Main Functions
Features
digital three phase ac control relay, microcontroller based design,
settings: over current, under current, individual phase, avg current
.