industrial valves & equipments

Bhayandar, Thane, Maharashtra

Ball valves are On-Off valves and also known as Shuts off valves and are used for flow control in On-Off fashion. These valves are used in utilities like water, air and steam pipe line, Three way & Four Way ball valve ; & PTFE lined ball Valve. With pressure rating of 150# to 1500, Single piece design Ball valve, Three piece design Ball valve.

FEP PFA Lined Flush Bottom Valves have 3 to 5 mm thick flouro polymers lining which is Anti corrosive as well as food grade. Lined Flush Bottom Valves found wide application in Chemical as well as pharmaceutical Industries. Fluoropolymers are inert to almost major acids and alkalis and gives longer working life. IVE flush bottom valves also offered with ECTFE ETFE and different anti corrosive coating, instead of FEP and PFA lining. Coated valves have coating thickness of 800 to 1000 micron.

The liquid or slurry which changes the state while passing through the valve can be handle smoothly with the jacketed flush bottom valves. Steam, Oil or Water can be circulated in the jacket for heating or cooling of the liquid or slurry passing through the valve. Available in both designs, Disc Opening in to the tank and Disc Lowering in to the valve. Outlet discharge angle available in 450and can also be tailored made to 600.

Y TYPE Flush bottom valves are used to discharge Liquids &Slurry from the bottom of Reactors, Receivers & huge Tanks. IVE Flush Bottom valves are available in design of Disc opening into the Tank ( vessel opening design) & Disc lowering (inside valve opening design) into the valve body. Flush bottom valves with disc opening into the tank or opening upwards is the most commonly used. It is used where enough space is available between bottom pad and the starrier of the tank. The mass load inside the tank helps closing & tight shut off the flush bottom valve.

The liquid or slurry which changes the state while passing through the valve can be handle smoothly with the jacketed flush bottom valves.

Steam, Oil or Water can be circulated in the jacket for heating or cooling of the liquid or slurry passing through the valve.

KEY FEATURES AND BENEFITS

• IVE- Jacketed Flush Bottom Valves available in C.S or S.S Jacket for uniform heating or cooling.
• Heating, Cooling and drain nozzle can be screwed or flanged design.
• Unique design ofIVEflush bottom valves assure Zero- Hold Up in the bottom pad of the tank. And facilitate the free flow and quick discharge of the liquid or slurry through the valves.
• Available in both designs, Disc Opening in to the tank and Disc Lowering in to the valve.
• Valves available in the range of 25 NB to 150 NB and in BS, ANSI, DIN, standards.
• Valves can be operated manually as well as pneumatically.
• Flush Bottom valves can also be provided with the temperature sensors to measure the temperature in the vessel.
• Outlet discharge angle available in 450and can also be tailored made to 600.
• Casted and fabricated in all available metallurgy, Carbon Steel, S.S 304, S.S 316, S.S 304L, S.S 316L, Alloy 20, Hast alloy and as per special specifications.
• Conical Metal to Metal disc seating/ PTFE seating with option of fixed or Renewable seat. Further metal seating can be hard faced by Stellite TM where distortion of seat by aggressive liquid or slurry is common.
• Bolted Stuffing Box (Gland), easily adjustable & with Repackable service.
• Rinsing & Non Rinsing stem with outside ACME thread.

FEP / PFALined Flush Bottom Valves have 3 to 5 mm thick flouro polymers lining which is Anti corrosive as well as food grade. Lined Flush Bottom Valves found wide application in Chemical as well as pharmaceutical Industries. Fluoropolymers are inert to almost major acids and alkalis and gives longer working life.

IVE flush bottom valves also offered with ECTFE / ETFE and different anti corrosivecoating, instead of FEP and PFAlining. Coated valves have coating thickness of 800 to 1000 micron.

KEY FEATURES AND BENEFITS

• IVE flush bottom valves suitable for corrosive as well as food grade application.
• FEP/ PFA lining available up to 5mm thick. Tested up to 10 KVA.
• ECTFE/ETFE/ Xylan coating available up to 1000 micron. Tested up to 5 KVA.
• Available in both designs, Disc Opening in to the tank (vessel opening design)and Disc Lowering (inside valve opening design) in to the valve.
• Valves available in the range of 15 NB to 150 NB and in BS, ANSI, DIN, standards.
• Operation of flush bottom valve can be automated with pneumatic cylinder and useful accessories.
• Outlet discharge angle available in 450C.
• Bolted Stuffing Box (Gland), easily adjustable & with Repackable service. Rinsing & Non Rinsing stem with outside ACME thread.

Flush bottom ball vales ideally suitable for the free flowing of liquid where space below vessel, tank or reactor is insufficient.

KEY FEATURES AND BENEFITS

• Unique design of IVE Flush bottom ball valves assures Zero Dead Leg Area above the ball where it tends to close.
• Casted and fabricated in all available metallurgy, Carbon Steel, S.S 304, S.S 316, S.S 304L, S.S 316L, Alloy 20, Hast alloy and as per special specifications.
• Valves available in the range of 25 NB to 200 NB and in BS, ANSI, DIN, standards.
• Screwed/ Bolted stuffing box (Gland), easily adjustable and with repackable service.
• Anti blow off proof stem.

FEP / PFA lined flush bottom ball valves are used for special application to handle corrosive liquid or pharmaceutical application where any contact material should be approved for the food grade. Lined Flush Bottom Ball Valves have 3 to 5 mm thick lining which is Anti corrosive as well as food grade.

KEY FEATURES AND BENEFITS

• IVEAnti corrosivelined flush bottom ball valves suitable for corrosive as well as food grade application.
• Unique design of IVE Flush bottom ball valves minimize the dead leg area above the ball where it tends to close.
• FEP/ PFA lining available up to 5mm thick. Tested up to 10 KVA.
• Valves available in the range of 25 NB to 100 NB and in BS, ANSI, DIN, standards.
• Operation of flush bottom ball valves can be automated.
• Operation of flush bottom ball valve can be automated with pneumatic actuator and useful accessories.

KEY FEATURES AND BENEFITS

• Automate liquid drain operation, minimize the labor.
• Automation accessories such as solenoid, limit switches, positioner offer as option. Precise control over important process parameters.
• Available with Anti corrosive lining for pharmaceutical and chemical application.
• Valves available in the range of 25 NB to 150 NB and in BS, ANSI, DIN, standards.
• Manual override provided for safety and emergency.

Flush bottom ball valve is also known as bottom valve or drain valve. As the name suggest, it is widely used to flush out the liquid or slurry from the bottom of Reactors, Receivers & Huge Tanks.

“IVE” is a leading flush bottom valve manufacturer. Our Flush bottom valve assures perfect drain of the liquid / slurry from the tank. The unique design of the flush bottom ball valve will prevent formation of the dead area in the valve, hence no hold up area in the tank or vessel. This is achieved as ball of the valve will comes in the level with the inlet flange.

 

“IVE” offers following types of Flush Bottom Ball valves:

1) Lined flush bottom ball valve2) Actuated ball and Y typeflush bottom valve

Download Cataloge/ drawing for

We are offering ptfe lined valves. Fep pfa lined valves have 3 to 5 mm thick flouro polymers lining which is anti corrosive as well as food grade. Lined valves found wide application in chemical as well as pharmaceutical industries. Fluoropolymers are inert to almost major acids and alkalis and gives longer working life. Feppfa lining up to 5mm thick is tested up to 10 kva.

IVE One piece design ball valves is offered in NO-JOINTS design.

This design assures highest leak proof characteristic. It is generally preferred in the pipe lines carrying hazardous or toxic liquids.

The operation of all type of IVE ball valves can be automated.

IVE can offer complete automation solution for the precise process control and also to integrate the working of ball valves with the rest of plant automation system.

Ball valves are on-off valves and also known as shuts off valves and are used for flow control in on-off fashion. These valves are used in utilities like water, air and steam pipe line. Ive offer ball valve in the following design variations single piece design ball valve two piece design ball valve three piece design ball valve jacketed ball valve flush bottom ball valve three way & four way ball valve ; & ptfe lined ball valve. With pressure rating of 150# to 1500# “ive” ball valves are available in size range ¼” (6mm) to 8” (200 mm)

FEP / PFA Lined Flush Bottom Ball Valves have 3 to 5 mm thick flouro polymers lining which is Anti corrosive as well as food grade. Lined Flush Bottom Valves found wide application in Chemical as well as pharmaceutical Industries. Fluoropolymers are inert to almost major acids and alkalis and gives longer working life.

IVE Manufactures soft seated Ball valves with variety of seating material to withstand temperature from -30C to +260C. IVE uses Virgin PTFE, Glass Filled PTFE, Carbon Filled PTFE, PEEK Filled PTFE, Delrin, PEEK to achieve these temperatures.

IVE Offer different metallurgy as per the end user requirement. It can be made available in variety of metal & polymer combination