We manufacture a wide range of O rings and other sealing material made from superior grade rubber with
Close tolerance
Environmental friendly
Resistant to oil
Pump O-Rings

Our range of pump O-Rings are used in mono-bloc pumps. These are both temperature and oil resistant

The O rings supplied by us to the defence battery manufacturer have the following application.
The O rings manufactured and supplied by us are assembled with a stainless steel screw. This assembly known as vent plug assembly is used to plug [by tightly screwing in] the cell containing potassium hydroxide solution as electrolyte. During charging the cell a slight amount of gas develops inside the cell. During discharging gas condenses to liquid. O ring prevents electrolyte leakage. (enhances the plugging effectiveness). The subject cells made with nickel & cadmium ingredients are assembled as b and are being used in air crafts by Indian Air Force.

We supply optimum quality of viton rubber molded gaskets that are made using qualitative raw material. Our range of viton molded gaskets are applied as rubber seals and also used in extreme conditions. These are ideal for household and commercial appliances. These can be availed in standard as well as customized specifications.

Mouldings, made to our customers' Requirements, are available in various grades of Silicone Rubber, or alternatively, in other materials viz: Neoprene - Nitrile - Natural EPDM and in Fluorocarbon Elastomers. We have the capacity to provide small, medium and large call offs.

Prompt delivery of goods is assured.

Its an ideal choice and top performer in a range of applications including automotive, chemical processing, aerospace, and industrial markets. This rubber is ideal for these applications because of its ability to resist high temperatures, destructive chemicals, and harsh environments. Certain technical and safety specifications must be met to ensure proper installation, optimal performance, and maximum uptime.This specific type of rubber is also ideal in challenging aerospace applications which require the ability to seal against hard vacuum and thermal cycling. Viton products for the aerospace market include:O-rings, Manifold gaskets, Hose for hot engine lubricants.

We are one of the leading supplier of pump gaskets. These are used in the manufacturing of mono-bloc pumps. We offer these gaskets at industry leading prices. We are one of the leading supplier of pump gaskets. These are used in the manufacturing of mono-bloc pumps. We offer these gaskets at industry leading prices.

O-ring seals are circular rings of various cross-sectional configurations installed in a gland to close off a passageway and prevent escape or loss of a fluid or gas. An oring is specified by three of its features: its dimensions, material, and hardness. Material and hardness specify the elastomeric compound and Shore A (durometer) hardness of the compound that is used to manufacture the o-ring. An O-ring's dimensions are described by stating its inside diameter (I.D.) and its cross-section. Designing for o-rings depends on three major and interrelated variables: the operating conditions or environment the seal will experience, the gland geometry into which the seal will be installed and the three variables account for the fact that there are so many different types of seals and applications.

IRP offers close to 1, 000 metric sizes available in Buna-N and Viton materials.

O-ring seals are circular rings of various cross-sectional configurations installed in a gland to close off a passageway and prevent escape or loss of a fluid or gas. An oring is specified by three of its features: its dimensions, material, and hardness. Material and hardness specify the elastomeric compound and Shore A (durometer) hardness of the compound that is used to manufacture the o-ring. An O-ring's dimensions are described by stating its inside diameter (I.D.) and its cross-section. Designing for o-rings depends on three major and interrelated variables: the operating conditions or environment the seal will experience, the gland geometry into which the seal will be installed and the three variables account for the fact that there are so many different types of seals and applications.

Apart from standard sizes, we also manufacture and supply custom-made rubber bushes to fulfill customer specific requirements. We manufacture low compression set and impact strength bushes with good resistance and dynamic properties. These bushes are highly flexible in low temperature. Catering to the automotive industry the bushes are especially designed as per required axial and radial loads.

We design and develop different types of flexible rubber bellows made from high quality rubber. These are available in variations of sizes and shapes which can also be customized as per buyers requirements. Our industrial rubber bellows are preferred by many reputed clients to cater to their industrial needs. Rubber bellow is an expandable/collapsible component used to protect the components from foreign particles.

Our rubber bellows are:
Dimensionally accurate
Wear and tear resistant
High torsional stiffness

Rubber to metal bonding is defined as a process covering a number of interdependent processes, in which rubber is adhered to metal substrate. The products made from the bonding of rubber to metal are used in various areas of the industrial fields.

They are mainly used for the isolation of vibration and noise in manufacturing applications, including automotive and engineering applications. The automobile industry, in particular uses a large number of bonded rubber to metal parts.

We manufacture and supply high quality rubber pads confirming to international standards. These rubber pads are used between machine parts in order to limit leaks, vibrations and ensure tight assembly. They are used in various industries and can be customized as per the customers need.

Our anti vibration rubber pads are manufactured high grade rubber and are used for reducing vibration and sound in applications such as mechanical/electrical, pumps, motors, air conditioning units, generators, and others.

We produce rubber grommets in every shape, size and specification like large rubber grommet, grommets for irrigation equipment automotive rubber grommets etc. These rubber moulded components are used in fields like automobiles filters, motors, engine gaskets, fuel injection pumps. Appliances electronics, hardware, telecom, furnishing and various similar industries.

These components are moulded according to customer requirements and strict specifications as per customer needs. We have innumerable standard and semi-standard sized rubber grommets available, and can supply virtually any configuration of size, style, and material compound without expensive tooling/mold costs in many cases.

Our company manufactures and supplies a wide range of rubber diaphragms which are highly resistant to various media at different pressure levels. Molded diaphragms are tough, versatile dynamic seals that eliminate virtually all of the limitations associated with other sealing methods.

These diaphragms cater to various applications for motors, pumps and valves. We can also manufacture customized rubber diaphragms as per specific requirements of our clients.

IRP produce safety silicone tubing any size from 3mm ID up to 120mm OD. Available from peroxide or platinum cured.

We can produce top-quality silicone profiles in any colour and in any hardness with the most suitable silicone compounds. An almost infinite range of sections and profiles are available in all the usual grades of silicones i.e. food grades, flame retardant, high and low temperature and steam resistant grades, etc.

Used to domestic appliances, Heating equipment, Electrical, Glazing

We manufacture a wide range of O rings and other sealing material made from superior grade rubber with
Close tolerance
Environmental friendly
Resistant to oil
Pump O-Rings

Our range of pump O-Rings are used in mono-bloc pumps. These are both temperature and oil resistant

The O rings supplied by us to the defence battery manufacturer have the following application.
The O rings manufactured and supplied by us are assembled with a stainless steel screw. This assembly known as vent plug assembly is used to plug [by tightly screwing in] the cell containing potassium hydroxide solution as electrolyte. During charging the cell a slight amount of gas develops inside the cell. During discharging gas condenses to liquid. O ring prevents electrolyte leakage. (enhances the plugging effectiveness). The subject cells made with nickel & cadmium ingredients are assembled as b and are being used in air crafts by Indian Air Force.

We supply optimum quality of viton rubber molded gaskets that are made using qualitative raw material. Our range of viton molded gaskets are applied as rubber seals and also used in extreme conditions. These are ideal for household and commercial appliances. These can be availed in standard as well as customized specifications.

Mouldings, made to our customers' Requirements, are available in various grades of Silicone Rubber, or alternatively, in other materials viz: Neoprene - Nitrile - Natural EPDM and in Fluorocarbon Elastomers. We have the capacity to provide small, medium and large call offs.

Prompt delivery of goods is assured.

Its an ideal choice and top performer in a range of applications including automotive, chemical processing, aerospace, and industrial markets. This rubber is ideal for these applications because of its ability to resist high temperatures, destructive chemicals, and harsh environments. Certain technical and safety specifications must be met to ensure proper installation, optimal performance, and maximum uptime.This specific type of rubber is also ideal in challenging aerospace applications which require the ability to seal against hard vacuum and thermal cycling. Viton products for the aerospace market include:O-rings, Manifold gaskets, Hose for hot engine lubricants.

We are one of the leading supplier of pump gaskets. These are used in the manufacturing of mono-bloc pumps. We offer these gaskets at industry leading prices. We are one of the leading supplier of pump gaskets. These are used in the manufacturing of mono-bloc pumps. We offer these gaskets at industry leading prices.

O-ring seals are circular rings of various cross-sectional configurations installed in a gland to close off a passageway and prevent escape or loss of a fluid or gas. An oring is specified by three of its features: its dimensions, material, and hardness. Material and hardness specify the elastomeric compound and Shore A (durometer) hardness of the compound that is used to manufacture the o-ring. An O-ring's dimensions are described by stating its inside diameter (I.D.) and its cross-section. Designing for o-rings depends on three major and interrelated variables: the operating conditions or environment the seal will experience, the gland geometry into which the seal will be installed and the three variables account for the fact that there are so many different types of seals and applications.

IRP offers close to 1, 000 metric sizes available in Buna-N and Viton materials.

O-ring seals are circular rings of various cross-sectional configurations installed in a gland to close off a passageway and prevent escape or loss of a fluid or gas. An oring is specified by three of its features: its dimensions, material, and hardness. Material and hardness specify the elastomeric compound and Shore A (durometer) hardness of the compound that is used to manufacture the o-ring. An O-ring's dimensions are described by stating its inside diameter (I.D.) and its cross-section. Designing for o-rings depends on three major and interrelated variables: the operating conditions or environment the seal will experience, the gland geometry into which the seal will be installed and the three variables account for the fact that there are so many different types of seals and applications.

Apart from standard sizes, we also manufacture and supply custom-made rubber bushes to fulfill customer specific requirements. We manufacture low compression set and impact strength bushes with good resistance and dynamic properties. These bushes are highly flexible in low temperature. Catering to the automotive industry the bushes are especially designed as per required axial and radial loads.

We design and develop different types of flexible rubber bellows made from high quality rubber. These are available in variations of sizes and shapes which can also be customized as per buyers requirements. Our industrial rubber bellows are preferred by many reputed clients to cater to their industrial needs. Rubber bellow is an expandable/collapsible component used to protect the components from foreign particles.

Our rubber bellows are:
Dimensionally accurate
Wear and tear resistant
High torsional stiffness

Rubber to metal bonding is defined as a process covering a number of interdependent processes, in which rubber is adhered to metal substrate. The products made from the bonding of rubber to metal are used in various areas of the industrial fields.

They are mainly used for the isolation of vibration and noise in manufacturing applications, including automotive and engineering applications. The automobile industry, in particular uses a large number of bonded rubber to metal parts.

We manufacture and supply high quality rubber pads confirming to international standards. These rubber pads are used between machine parts in order to limit leaks, vibrations and ensure tight assembly. They are used in various industries and can be customized as per the customers need.

Our anti vibration rubber pads are manufactured high grade rubber and are used for reducing vibration and sound in applications such as mechanical/electrical, pumps, motors, air conditioning units, generators, and others.

We produce rubber grommets in every shape, size and specification like large rubber grommet, grommets for irrigation equipment automotive rubber grommets etc. These rubber moulded components are used in fields like automobiles filters, motors, engine gaskets, fuel injection pumps. Appliances electronics, hardware, telecom, furnishing and various similar industries.

These components are moulded according to customer requirements and strict specifications as per customer needs. We have innumerable standard and semi-standard sized rubber grommets available, and can supply virtually any configuration of size, style, and material compound without expensive tooling/mold costs in many cases.

Our company manufactures and supplies a wide range of rubber diaphragms which are highly resistant to various media at different pressure levels. Molded diaphragms are tough, versatile dynamic seals that eliminate virtually all of the limitations associated with other sealing methods.

These diaphragms cater to various applications for motors, pumps and valves. We can also manufacture customized rubber diaphragms as per specific requirements of our clients.

IRP produce safety silicone tubing any size from 3mm ID up to 120mm OD. Available from peroxide or platinum cured.

We can produce top-quality silicone profiles in any colour and in any hardness with the most suitable silicone compounds. An almost infinite range of sections and profiles are available in all the usual grades of silicones i.e. food grades, flame retardant, high and low temperature and steam resistant grades, etc.

Used to domestic appliances, Heating equipment, Electrical, Glazing