Kolkata, West Bengal, India
Verified
Add Review
Our Products
| Technical Data - Needle Scalers - Aluminium | ||||||
| Model | Net Weight (kg) | Overall Length (mm) | Frequency bpm |
Air Consumption (m3/min) | Air Inlet Details | Number of Needles |
| N24 | 2.85 | 315 | 4200 | 0.24 | 3/8 inch NPT |
2mm x 180 - 65pcs 3mm x 180 - 23pcs 4mm x 180 - NA |
| N28 | 3.70 | 350 | 4750 | 0.28 | 3/8 inch NPT |
2mm x 180 - 65pcs 3mm x 180 - 23pcs 4mm x 180 - 14pcs |
| Optional Equipment: N24- 2mm & 3mm needle supporters N28- 2mm, 3mm or 4mm needle supporters |
||||||
| Technical Data | |||||||
| Model | Net Weight (kgs) |
Overall Length (mm) | Frequency (bpm) | Air Consumption (m3/min) | Stroke & Bore | Throttle Type mm x mm |
Piston Tip Material |
| 1SC | 2.8 | 481 | 3900 | 0.15 | 26x27.0 | Lever | Tungsten Carbide |
| 3SC | 3.5 | 481 | 3200 | 0.27 | 26x27.0 | Lever | Tungsten Carbide |
| X2 | 2.8 | 500 | 3900 | 0.14 | 33x28.6 | Twist | Chromium Molybednum Steel |
| IMT's Needle Scalers are ideal for removing layers of paint, corrosion, chemical coatings and similar material from metal and almost any other surface too. An important feature of these products is the ability to de-scale surfaces that are irregular such as crevices, corners and recessed areas. The needles are heat treated alloy steel and are easily replaceable with minimum downtime. |
| Technical Data - Needle Scalers - Steel | ||||||
| Model | Net Weight (kg) | Overall Length (mm) | Frequency bpm |
Air Consumption (m3/min) | Air Inlet Details | Number of Needles |
| NX-3 | 3.8 | 340 | 2250 | 0.23 | 1/4 inch BSPT |
2mm x 180 - 65pcs 3mm x 180 - 28pcs 4mm x 180 - 19pcs |
| STX-3 | 2.1 | 320 | 2250 | 0.23 | 1/4 inch BSPT |
2mm x 180 - 53pcs 3mm x 125 - 28pcs 4mm x 180 - 14pcs |
| Optional Equipment: 2mm needle supporters and 4mm needle supporters | ||||||
| ||
|
| Features |
|
BBC120F Drifter is a Pneumatic Rock Drill intended for use on drill rigs in the following areas
| |||||||||
| A popular all-round machine, the BBC120F Drifter has earned a reputation of economy and reliability. The powerful BBC120F Drifter has a moderate weight and this facilitates manual handling of the unit which can be mounted on simple and light rigging structures. Assembled from components in a sectional system. The complete assembly can be easily dismantled for service and inspection of internal parts. All wear parts are easy to replace. Regular inspection will hold operating costs to minimum. Intended for operation with remote control, the rotation is reversible, a necessary feature for use with extension steel in long-hole drilling. The rotation mechanism can also be disengaged and the impact action used to rattle a tight joint or a jammed joint. | |||||||||
Our busters are heavy duty, powerful hammers offering superb control on blow, frequency and energy.
They are used for heavy duty chipping, demolition of reinforcement and cutting off large rivets.
Integral Drill Steels are normally produced from 19mm (3/4" ), 22mm ( 7/8") or 25mm (1") Hexagon Drill Steel, where the dimensions given are measured across the flat of the hexagon.
Integral Drill Steels are a fixed length with a shank at one end and a bit at the other, and are able to drill to a depth equivalent to their effective length. The bit may consist of a single chisel shaped tungsten carbide insert or three such inserts.
To drill deep holes, the rods are designed to be used in a series where the length of any rod used is longer than the one used just before it. To do this, a series of rods must be produced so that the bit diameter is reduced for each increase in length of rod to prevent jamming of the bit in the hole.
| Effective Length (mm) |
Bit Dia (mm) |
Order Code |
| 800 | 34 | 834 |
| 1600 | 33 | 1633 |
| 2400 | 32 | 2432 |
| 3200 | 31 | 3231 |
| 4000 | 30 | 4030 |
| 4800 | 29 | 4829 |
| 5600 | 28 | 5628 |
| 6400 | 27 | 6427 |
