Most suitable for Dry Powder Mixing of a small quantity active ingredient with large quantity of powder. A quantity relationship between components, higher than 1: 100 can be mixed, effectively.

Most commonly used for lubrication process in tableting department. Due to the shape of blender. Powder slides on the sides and mixes well because of very low RPM . Therefore there is no impact on the powder / granules and it mixes well.

These machine is basically a container, which tumbles around its own axis driven by gear box and motor. Loading and Unloading is easy. Drum arrangement along with conical hopper arrangement is available.

Models available from capacity 5 Ltrs to 6000 Ltrs .

The V Blender is an efficient and versatile blending machine for mixing and lubrication process of dry powders homogeneously. Approximate two third of the volume of the Blender is filled to ensure proper mixing. In V Blender the powders comes from all sides due to the "V" shape of the product container, hence requirement of RPM is medium. The product fed inside are processed by tumbling , inside sliding along and falling by gravity, which results in producing a perfect blend in minimum period of time. Suitable mainly for powder & granules type material. This type of material gets sufficient continuous movement. Medium movement of Blender will results in good quality of blending / lubrication of granules. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc.

We offer "V" Blenders that are suitable for mixing of solid-solid or solid with liquid (Maximum 10%) in powder or granulated form. The mixer has a "V" shaped body held by two horizontal half shafts and bearing blocks mounted on a sturdy structure. The bottom end of the chamber posses a butterfly discharge valve. Feeding and cleaning are carried out through other two ends of the machine which are fitted with closing lids. These blenders offer homogeneous blending with low shear blending action that prevents excessive fines or changes to particle shape and size.

Salient Features:

• The vessel has opening at two ends with covers and outlet butterfly valve for discharge
• The vessel is driven with the help of a worm reduction gearbox coupled to an electric motor
• All contact parts are made of stainless steel 304 / 316
• Stand can be of MS or SS cladded for GMP model
• All SS parts are mirror polished to mirror finish from inside and matt finish from outside
• The unit is provided with a control panel board with safety railing
• It allows smooth mixing without deforming the particles or a strong mixing by breaking the lumps
• Automatic discharge by gravity
• Material Charging Trolley (Optional)
• Our range has gained appreciation for the following attributes:
• Convenient cleaning, loading and unloading
• Low maintenance
• Low energy consumption
• Simple Design

Ideal equipment for blending within a closed environment and dust free operation. The Quality of the blending is achieved by the shape of the container without any internal baffles. The unit is most suitable for handling of different size containers by using a common drive.

Salient Features :

• 0stopping for easy docking and undocking of the bin
• Safety guard around the blender bin
• Proximity Sensor is provided for safe operation
• Flexibility of accepting variable bin sizes in single drive unit.
• cGMP Construction
• S.S. 316 Butterfly valve at the bottom suitable for discharge.
• Vent nozzle on top Most effective for low volume active ingredient blending with as low as 1 to 1.5%

Bin Blender has been designed for completely automatic process of mixing. The equipment is constructed according to cGMP principles and is manufactured from AISI 316 grade stainless steel. The equipment is highly versatile as the bins of different sizes can be used. The versatile Bin Blender comprises of robotic pillars, rotary cubical cage, hydraulic bin lifting mechanism, locking mechanism, drive arrangement, auto braking system for perfect positioning of bin after stop command, laser sensing device for safety and smart PLC control. 

Process :

The equipment refuses to start if the bin is not locked properly. The parameters are programmed and the bin always stops in perfect vertical position. After stopping it can be lowered hydraulically and emptied. A printer port is provided to give the records of the process just completed.

Features :

• Compact structure, steady performance and convenient to operate
• High mixing co-efficiency
• High quality inside polish
• Easy interchangeability of bins for different batch quantities
• PLC Control system
• Process data printout facility

Most suitable for Dry Powder Mixing of a small quantity active ingredient with large quantity of powder. A quantity relationship between components, higher than 1: 100 can be mixed, effectively.

Most commonly used for lubrication process in tableting department. Due to the shape of blender. Powder slides on the sides and mixes well because of very low RPM . Therefore there is no impact on the powder / granules and it mixes well.

These machine is basically a container, which tumbles around its own axis driven by gear box and motor. Loading and Unloading is easy. Drum arrangement along with conical hopper arrangement is available.

Models available from capacity 5 Ltrs to 6000 Ltrs .

The V Blender is an efficient and versatile blending machine for mixing and lubrication process of dry powders homogeneously. Approximate two third of the volume of the Blender is filled to ensure proper mixing. In V Blender the powders comes from all sides due to the "V" shape of the product container, hence requirement of RPM is medium. The product fed inside are processed by tumbling , inside sliding along and falling by gravity, which results in producing a perfect blend in minimum period of time. Suitable mainly for powder & granules type material. This type of material gets sufficient continuous movement. Medium movement of Blender will results in good quality of blending / lubrication of granules. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc.

We offer "V" Blenders that are suitable for mixing of solid-solid or solid with liquid (Maximum 10%) in powder or granulated form. The mixer has a "V" shaped body held by two horizontal half shafts and bearing blocks mounted on a sturdy structure. The bottom end of the chamber posses a butterfly discharge valve. Feeding and cleaning are carried out through other two ends of the machine which are fitted with closing lids. These blenders offer homogeneous blending with low shear blending action that prevents excessive fines or changes to particle shape and size.

Salient Features:

• The vessel has opening at two ends with covers and outlet butterfly valve for discharge
• The vessel is driven with the help of a worm reduction gearbox coupled to an electric motor
• All contact parts are made of stainless steel 304 / 316
• Stand can be of MS or SS cladded for GMP model
• All SS parts are mirror polished to mirror finish from inside and matt finish from outside
• The unit is provided with a control panel board with safety railing
• It allows smooth mixing without deforming the particles or a strong mixing by breaking the lumps
• Automatic discharge by gravity
• Material Charging Trolley (Optional)
• Our range has gained appreciation for the following attributes:
• Convenient cleaning, loading and unloading
• Low maintenance
• Low energy consumption
• Simple Design

Ideal equipment for blending within a closed environment and dust free operation. The Quality of the blending is achieved by the shape of the container without any internal baffles. The unit is most suitable for handling of different size containers by using a common drive.

Salient Features :

• 0stopping for easy docking and undocking of the bin
• Safety guard around the blender bin
• Proximity Sensor is provided for safe operation
• Flexibility of accepting variable bin sizes in single drive unit.
• cGMP Construction
• S.S. 316 Butterfly valve at the bottom suitable for discharge.
• Vent nozzle on top Most effective for low volume active ingredient blending with as low as 1 to 1.5%

Bin Blender has been designed for completely automatic process of mixing. The equipment is constructed according to cGMP principles and is manufactured from AISI 316 grade stainless steel. The equipment is highly versatile as the bins of different sizes can be used. The versatile Bin Blender comprises of robotic pillars, rotary cubical cage, hydraulic bin lifting mechanism, locking mechanism, drive arrangement, auto braking system for perfect positioning of bin after stop command, laser sensing device for safety and smart PLC control. 

Process :

The equipment refuses to start if the bin is not locked properly. The parameters are programmed and the bin always stops in perfect vertical position. After stopping it can be lowered hydraulically and emptied. A printer port is provided to give the records of the process just completed.

Features :

• Compact structure, steady performance and convenient to operate
• High mixing co-efficiency
• High quality inside polish
• Easy interchangeability of bins for different batch quantities
• PLC Control system
• Process data printout facility