Industrial Machinery Corporation

Focal Point, Ludhiana, Punjab

national machinery corp. is a distinguished manufacturer, exporter and supplier of pipe threading machine in india. by offering three types of pipe threading machine namely conduit pipe threading mac, pvc pipe threading machine and steel pipe threading machine, we are ruling domestic as well as international trade channel. factors like excellent performance, minimal maintenance, and easy installation convey a lot to the preference of our pipe threading machine.

design & workmanship

the nationwide reducing tools thread cutting machines are developed to generate great quality threads within the tolerance for which they were developed.

head stock

a higher great quality designed go box is of best great quality launching offering support to the spindle bearings. the box is of equipment type, oiled, fixed with three additional great high quality bearings.

the bed

the bed is pillar type having two support beams created of best great quality metal perfectly finished & properly difficult firefox coated in the most modern difficult firefox plating unit.

the saddle

the seat is fixed on two pillars very precisely. it operates on support beams very efficiently and perfectly to the go inventory positioning.

the apron

the attire gives activity to the saddle with head exchange along with support beams through metal holder and pinion preparations. it's all equipment are created of best great quality metal.

vice jaws

the vice oral cavity created from the best great quality metal are fixed on the saddle well arranged with the top stock center fixed in a great high quality box type vice. the oral cavity is warm handled. the motions of oral cavity are managed by the saddle.

range

• 1/4" to 1" do/-
• 3/8" to 1.12" do/-
• 1/2" to 2.1/2" do/-
• 1" to 4" capacity pipe
• 2.1/2" to 6" capacity pipe
• 4" to 8" 4" to 8" capacity pipe

Thread - TPI or Pitch :1/8 in - 27 NPT, 1/4 in - 18 NPT, 3/8 in - 18 NPT, 1/2 in - 14 NPT, 3/4 in - 14 NPT, 1 in - 11 1/2 NPT

Material :Carbon Steel, HSS

Includes :Wooden Case, Taps, Dies

Type :Tap & Die

Your tapping requirement may be unique for various reasons, but one common requirement in all applications is successful tapping. Some examples of why your application may be special.

Material characteristic such as swarf type, elasticity, strength and hardness. depth of hole thread size pitch thread form reach holding.

There are essentially four qualities in successfully designing and manufacturing a tap.

Theoretical knowledge and practical experience are intrinsic in this process.

Size form geometry texture or finish

Base material, its heat treatment, and final surface coating are significant factors; but they would be irrelevant without the correct geometry. Tap geometry involves a combination of features tailored to all the above. thread and flute cutting angles, flute pattern, cutting force reduction features. The culmination of these geometrical features is the knowledge we refer to. Our knowledge combined with processes and equipment, allow consideration of all these variables

By making use of quality packaging material, we pack the entire lot in a safe manner ensuring zero damage at buyer's end. The packing procedure is conducted under the guidance of experts. We are comfortable with traditional payment options as well as the modern ones. Our payment related policies are client friendly. Our payment procedures are transparent, safe, and secure.

• Liquid Paint Tanks 1 Nos.
• Dripping Tray - 1 no
• Oil Fired Curing oven (Straight Type) 1 Nos.
• Overhead Motorized Conveyor, with support Structure 1 Set.
• Electrical Control Panel 1 Set.
• Painting, and Finishing etc. 1 Lot
• t

Welder/Outer Prop Welding Machine Prop Outer Prop welding machine With Mig Welding Machine 380-415Volts 50-60 Hz. Only. (Three Hot Lines) Projection Welder / Welding (NCT50)

Key Features :High production , Easy to operate, Easy to maintain, Uniform welding results

Jack Welding Machine is used to weld base plate with pipe and sleeve without making any joint between them, It gives high production and accuracy to product. Outer prop are used with combination of Inner prop and base jack to make a structure. All the components are used in combination of each other Base jack welding machine, Inner prop welding machine, Outer prop welding machine, Cuplock welding machine, Ringlock welding machine. National Machinery Corp. provides complete solution for scaffolding and formwork by providing Automatic scaffolding machines.

• Technical Specifications : Outer Prop welding machine Electric
• Supply: Single Phase 220 Volt HZ 50/60
• Speed : 2 to 10 RPM
• Motor Drive: AC Inverter
• Type Motor : Type AC 220-Volts-3-Phase Torch
• Clamping : PNEUMATIC
• Length Adjustment : 150 to 2400 mm
• Dimension : L x W x H 11.3x2.5x5.3 (Foot)

Horizontal Standard Ledger Welding System with Mig Welding Machine 380-415 Volts 50-60Hz. Only. (Three Hot Lines)

Welding Automation Ledger Welder

Key Features:-High production , Easy to operate, Easy to maintain, Uniform welding results

Description :Automatic Ledger welding machine is used to weld ledger blades with pipe without making any joint between them, It gives high production and accuracy to product. Ledger post are used with combination of Cuplock welding to make a structure. All the components are used in combination of each other Base jack welding machine, Inner prop welding machine, Outer prop welding machine, Cuplock welding machine, Ringlock welding machine.

National Machinery Corp. provides complete solution for scaffolding and formwork by providing Automatic scaffolding machines.

• I Ledger welding Double Side
• Electric Supply: Single Phase 220 Volt HZ 50/60
• Speed: 2 to 10 RPM
• Motor Drive: AC Inverter Type
• Motor: Type AC 220-Volts-3-Phase
• Torch Clamping : PNEUMATIC
• Length Adjustment : 150 to 2400 mm
• Dimension : L x W x H 11.3x2.5x5.3 (Foot)

National Machinery Corp. is one of the leading Manufacturers, Exporters and Suppliers of Pipe Beveling Machine. It is used for the purpose of beveling the Pipe End. Pipe is Beveled from the Outer and Front is faced by two different tools. The Pipe remains Stationery and the Beveling Head rotates and comes out of the Head Stock for cutting the Pipe End. It consists of the following:-

Bed

The Bed of Pipe Beveling Machine is made of Cast Iron. It is Very Rigid and sturdy in construction so as to take maximum Load and absorb maximum vibrations. It is provided with four Nos. Foundation Holes of Dia M20 at four corners of the bed. It is also provided with Four Tapped holes of 5/8 BSW near the Foundation Holes. The Head Stock and Clamping Vice is fitted on the Bed.

Head Stock

he Head Stock body of Pipe Beveling Machine is made of Cast Iron. It is Very rigid and sturdy in design. The Head Stock is designed for Four Nos. Spindle speeds. All the Gears are of helical type made out of Axle Forging. The width of gears is 50 mm. The Shifting Gears slide on Splined Shafts. The Shafts are mounted on Heavy Duty Ball Bearings. The Input Shaft will be provided with a pulley having three grooves for C-Section V-belts. The Main Spindle is mounted on two Taper Roller Bearings mounted in Hard Chrome Plated Ground Sleeve. The Sleeve along with main spindle fitted with Beveling Head is mounted in the Head Stock body and is movable To and Fro along its axis. A Hyd. Cylinder actuated electrically makes the movement of the sleeve in the Head Stock. The Movement of the Sleeve can also be made manually. The Head Stock is Oil Filled. It is provided with Oil Filling hole, Oil Drain hole and Oil Level Indicator.

Clamping Vice

The Box Type Clamping Vice is fitted on the Bed. The Vice is provided with Round Clamping Jaws for each size (4, 5, 6, 7, 8, ). The Vice will be Self-centering type. The movement of the Clamping Jaws is made by Pneumatic cylinder fitted on the Vice actuated electrically. The Vice will be very rigid and sturdy in design. Machine will be supplied with single clamping vice.

Beveling Head

A special Beveling Head will be provided with the machine. Two Tools of HSS will be used, One for Beveling and second for Root Face. The Beveling Tool will be mounted in a special Spring Loaded Tool Holder with a Roller device. It is fitted on the main spindle that is then mounted in the traveling Sleeve.

We are a distinguished Manufacturer, Exporter, and Supplier of Pipe End Facing Machine from Punjab (India). Our Pipe End Facing Machine mainly consists of base, head stock, saddle and clamping vice. Before galvanizing and threading, pipes are chamfered from inner, outer and front face, and deburred with the help of Pipe End Facing Machine. Pipe End Facing Machine helps pipes remain stationery while the facing head of the pipe rotates. For manual chamfering, slide of the pipe moves towards facing head.

Is fitted in the two parts of EN-34 alloy steel duty tempered and property ground and give a perfect service. All are being taken that the key may not break and is suitable to stand the jerks.

Highest degree of precision maintained during the fitting of ram and it's base is checked very property on 90 angel with the dail indicator. Horizontally & Perpendicularly.

The press bodies are manufactured out of the close grain casting and steel fabricated as well.

specification

we deals in thread rolling machine sited in ludhiana (india), we guarantee safe side deliveries of consignments in a time limited period. since inception, our company has upheld its policy to make timely delivery. thus, we guarantee to deliver products to buyers doorsteps on the dates promised.

range:

• pointing machine
• wire drawing machine
• straightening and cutting machine
• thread rolling machine
• galvanised or zinc plant
• features

  brand name	nct
  place of origin	india

  additional information

  payment terms	l/c, t/t
  packaging details	wooden box