Our Products
We have lanched our new range of P.V.C. Pipe threading to solve your threading problem quality wise & Production wise, we have the above special purpose lathes with capacity from 50mm. to 250mm for 3 mtr. Pipe & 4 mtr. Pipes.
220 tons 40MM capacity, HydraulicTMT Bar Forging Machineto be comprising of 01 No's of Double Stroke Double Acting Hydraulic Cylinders of which one is the Hydraulic Clamping Cylinders & other is the Forging Cylinder, One no's of Forging Block with 01 nos Holder & 3 nos of Die Sets along with Punch & 03 nos of 7.5 H.P. Dual type (High Pressure & Low-Pressure Power Pack Unit.
Additional Information:
Delivery Time : 15- 35 days
Industrial Machinery Corporationhas uniquely positioned itself as a dependable firm, engaged in manufacturing and supplying a commendable array ofResharpening machines. These Tools and Taps Resharpening Machines are manufactured using excellent quality raw materials and the latest technology by our skilled professionals. In order to ensure quality, this Tap and Tool Grinder Machine is stringently tested on various parameters by our experts. Apart from this, remarkable quality and durability increase the demand for our offered range in the market. No injuries during the re-sharpening process and saving time from re-sharpening taps and tools.
The Tap and Tool Grinder Machineis used for re-sharpen the taps and tools. Taps, like all other cutting tools, become dull through use. Dull taps can produce either oversize or undersized holes. They may chip, produce poor threads, or break in extreme cases. This Tap and Tool Grinder Machine is used for dull or bad tools re-sharpening outside and saving the cost of hiring a skilled worker for re-sharpening taps and tools. This Tap and Tool Grinder Machine will be saving you cost and time.
Smaller sizes of taps are generally reconditioned by grinding the chamfer portion only, while larger taps may also require flute grinding. Taper pipe taps must be sharpened by grinding the flutes and spiral-pointed taps must be reground in the angular portion of the flute as well as on the chamfer.
Flute grinding or spiral point grinding should also be done on a tap reconditioning machine or on a cutter grinder. Flute grinding wheels should be shaped with a diamond dresser of the appropriate type to produce a rake face or hook face as required. Both chamfers and flutes should be ground carefully so as not to burn the cutting edges of the tap, careful grinding will also produce a smooth finish on the tap. Wheels of K or L hardness and 60-grain or finer should be used.
Tap and Tool Grinder Machine Features:
Additional Information:
Delivery Time : 15- 45 days
Industrial Machinery Corporation is manufacturing and offeringScaffolding Pipe Threading Machineused for Construction Scaffolding material. The scaffolding pipe can be thread by Thread Cutting or Thread Rolling Process. Hydraulic Scaffolding Thread Rolling Machines are used for high production and long threads and Scaffolding Thread Cutting Machines are used for low production and can thread upto 650mm only. For long thread and high production we recommend you to Thread with Rolling process.
Industrial Machine Corporationhas been in the business of manufacturing industrial machines for more than a decade now. By being in this business for so long, we have acquired a vast experience and expertise which we have applied all in manufacturing and exporting of various industrial designs to our clients from across the world. Our specialization has made us build each and every machine with utmost technology. IMC manufacturing unit based in Ludhiana is one of the most advanced units comprising of all the latest and upgraded machines, newest to newest technologies, and vastly experienced man-power who use the available resources very wisely to manufacture the best of scaffolding machines. Our zeal and intensity for giving our best every time comes from the fact that customers worldwide have unflinching faith in IMC Hydraulic Thread Rolling and Thread Cutting Machines manufactured at Industrial Machinery Corporation.
When one thinks of aRebar threading machine, the thought automatically goes to the wide range of Rebar machines that one can avail in the domain. However, each manufacturing unit or organization will have the need for one particular type of Threading Machine.
For all these 10 years of being in business, we have always kept our production standards very high and ensured that there is no flaw in the entire process.
One of the most important factors that you need to think about is the company you are choosing for purchase. A good company will not only give you a product that is worthy of your trust but will also ensure that you receive excellent after-sales services. A good machine, whether it is a rebar threading machine or any other, needs to be high on factors of efficiency while being used and durability as well.
If you choose to purchase a rebar machine, it would be a good idea to choose a sales unit that has immense market experience. Industrial Machinery Corporation would be a good choice, as they not only offer a vast range, but also the assurance that every machine that is sent out of their unit is a piece of excellence.
IMC TMT bar or Rebar Tangential Chasers are manufactured from imported High-Speed Steel which must pass exacting metallurgical standards. Experienced heat treatment with the automatically imported heat treatment plant and imported Testing equipment, assure that they will perform satisfactorily in service and produce quality threads within the tolerance for which they ware intended.
Range of IMC Machine Die Heads.
1/4" to 1" do/-3/8" to 1.1/2" do/-1/2" to 2.1/2" do/-
SpecificationsMODEL | 1/4" TO 1" (6MM to 25MM) (BED TYPE) | 3/8" TO 1.1/2" (10MM to 40MM) (BED TYPE) | 1/2" TO 2.1/2" (12MM to 65MM) (BED TYPE) |
Saddle Movement | 10" | 13" | 22" |
Spindle Speed Range | 75-140 | 75 -140 | 45 - 90 |
Number of Spindle Speed | 2 | 2 | 2 |
Threading Capacity | 1/4" to 1" | 3/8" to 1.1/2" | 1/2" to 2.1/2" |
Production per Hour | 60-80 | 60-80 | 70-90 |
H.P. Required | 3 H.P. | 3 H.P. | 7.5 H.P. |
Lead Screw | Optional | Optional | Optional |
Weight (KG) Approx. | 500 | 550 | 990 |
Additional Information:
Delivery Time : 15- 30days
The PVC Pipe Threading Machineis use to cut the external threads with the help of Tangential chaser. Chaser is use as a cutter in machine. It remain still, Die-head rotates and different type of threads can be cut parallel and taper such as BSPT, BSW, BSP, NPT, UNF, METRIC, UNC, ACME, BSF Threads. The Machine mainly consists the following:-
BaseHead StockSaddleBed or Pillar Type Clamping ViceDie Head.
DESIGN AND WORKMANSHIP: The Industrial Machinery Corporation thread cutting machines are designed to produce quality threads within the to lerance for which they were intended.
HEAD STOCK: A heavy duty geared Head Box is of best quality casting providing support to the spindle bearings. The box is of gear type, lubricated, fitted with three extra heavy duty bearings.
THE BED: The bed of pillar type Threading Machine having two pillars made of best quality steel nicely finished and duly hard chrome plated in the most modern hard chrome plating unit.
THE SADDLE: The Saddle is fitted on two pillars very precisely. It runs on pillars very smoothly and accurately to the Head Stock alignment.
The APRON: The apron gives movement to the saddle with head transfer along with pillars through steel rack and pinion arrangements. It's all gears are made of best quality steel.
VICE JAWS: The vice jaws made from the best quality alloy steel are fitted on the saddle well aligned with the head stock center fitted in a heavy duty box type vice. The jaws are heat treated. The movements of jaws are controlled by a screw on the saddle.
Range of IMC PVC Pipe Threading Machines and Die Heads.
1/4" to 1" do/-3/8" to 1.1/2" do/-1/2" to 2.1/2" do/-
PVC Pipe Threading MachineModel | 3/8" to 2" (10MM to 50MM) | 1/2" to 2.1/2" (12MM to 65MM) | 1" to 4" (25MM to 100MM) | 2." to 6" (65MM to 150MM) | 4" to 8" (100MM to 200MM) | 8" to 10" (200MM to 250MM) |
Saddle Movement | 10"- 12" | 16" | 10 - 12" | 8" | 8" | 8" |
Spindle Speed Range | 127-180 | 60-90-120 | 40-75-115 | 25-50 | 25-50 | 10-20-30 |
Number of Spindle Speed | 2 | 3 | 3 | 2 | 2 | 3 |
Threading Capacity | 3/8"to 2" | 1/2" to 2.1/2" | 1 to 4" | 2.1/2" to 6" | 4" to 8" | 8" to 10" |
Production per Hour | 100-120 | 70-90 | 35-40 | 20-25 | 15-20 | 15-20 |
H.P. Required | 3 H.P. | 7.5 H.P. | 12.5 H.P. 960 | 15 H.P. 960 | 20 H.P. 960 | 30 H.P. 960 |
Lead Screw | Provided | Provided | Provided | Provided | Provided | Provided |
Weight (KG) Approx. | 550 | 990 | 1600 | 1900 | 2500 | 5000 |
Additional Information:
Delivery Time : 15- 30days
ABolt Threading Machineis basically used for creating external threads on job and chasing method is used to execute this task to threading the bolts. HSS Bolt Threading Tangential Chasers are used as cutters. Job remains un-moved while the die head rotates creating super-fine threads. The Bolt Threading Machine is manufactured with us allows its users to create a wide range of threads like BSP, MATRIX, BSPT, NPT, UNF, UNC, BSW, Acme Threads but again the entire preference depends on the type of chasers. Generally, this is made up of the components mentioned below.
Head stock: It is used to provide contented rigidity and enduring alignment with the carriage ways. This head stock is made up of unadulterated and shaven alloy steel and shafts are made using heated alloy steel which increases in durability.
Pillar bed: This bed is designed to provide operative convenience to the user. This bed is smooth yet is a rigid construction. Chrome plated pillars are used to direct and shore up the carriage. Guards, attached to the carriages, avert damage to the ground surfaces of the ways.
Saddle: It is fitted very precisely on two pillars and runs on them very smoothly and accurately to the headstock alignment.
Apron: This gives momentum to the saddle with head transfer along with the pillars. This is done on steel rack and rigid arrangements. Gears are made up of supreme quality steel.
Vice jaws: The vice jaws made from the best quality alloy steel are fitted on the saddle well aligned with the head stock center fitted in a heavy duty box type vice. The jaws are heat treated. The movements of jaws are controlled by a screw on the saddle.
Range of IMC Bolt Threading Die Heads.
Diameter 1/4" to 1" do/-Diameter 3/8" to 1.1/2" do/-Diameter 1/2" to 2.1/2" do/-Diameter 1" to 4" do/-
Bolt Threading Machine Specification :
MODEL | 1/4" TO 1" (6MM to 25MM) (BED TYPE) | 3/8" TO 1.1/2" (10MM to 40MM) (BED TYPE) | 1/2" TO 2.1/2" (12MM to 65MM) (BED TYPE) | 1" TO 4" (25MM to 100MM) (PILLAR TYPE) |
Saddle Movement | 10" | 13" | 22" | 10" - 12" |
Spindle Speed Range | 75 -140 | 75 - 140 | 45 - 90 | 40-75-115 |
Number of Spindle Speed | 2 | 2 | 2 | 3 |
Diameter Capacity | 1/4" to 1" | 3/8" to 1.1/2" | 1/2" to 2.1/2" | 1" to 4" |
Production per Hour | 60-80 | 60-80 | 70-90 | 35-40 |
H.P. Required | 3 H.P. | 3 H.P. | 7.5 H.P. | 12.5 H.P. 960 |
Lead Screw | Optional | Optional | Optional | Provided |
Weight (KG) Approx. | 500 | 550 | 990 | 1600 |
Additional Information:
Delivery Time : 15- 30days
Rod Threading Machineis used to cut the external threads with the help of a Tangential chaser. Chaser is used as a cutter in Machines. The job remains still, Die-head rotates and different types of threads can be cut such as BSPT, BSW, BSP, NPT, UNF, METRIC, UNC, ACME, and BSF Threads. It mainly consists of the following:-
ROD THREADING MACHINE is designed to give maximum efficiency and reliable performance under the most severe conditions of service with minimum maintenance cost. All the necessary requirements are combined in this model to from the basic fundamentals of the correct thread. All the gears are made of case hardened steel with an extra large face and tooth thickness and cut on hobbing machine for noiseless operation even at high speed. Naturally, they are built with high standards of workmanship, material, and quality so closely associated with COMPANY TRADITION.
Range of IMC Die Heads.
1/4" to 1" do/-3/8" to 1.1/2" do/-1/2" to 2.1/2" do/-
Rod Threading MachineMODEL | 1/4" TO 1" (6MM to 25MM) (BED TYPE) | 3/8" TO 1.1/2" (10MM to 40MM) (BED TYPE) | 1/2" TO 2.1/2" (12MM to 65MM) (BED TYPE) |
Saddle Movement | 10" | 13" | 22" |
Spindle Speed Range | 75-140 | 75 -140 | 45 - 90 |
Number of Spindle Speed | 2 | 2 | 2 |
Threading Capacity | 1/4" to 1" | 3/8" to 1.1/2" | 1/2" to 2.1/2" |
Production per Hour | 60-80 | 60-80 | 70-90 |
H.P. Required | 3 H.P. | 3 H.P. | 7.5 H.P. |
Lead Screw | Optional | Optional | Optional |
Weight (KG) Approx. | 500 | 550 | 990 |
Additional Information:
Delivery Time : 15- 30days
Electric Conduit Pipe Threading Machine is use to thread the external area of the conduit pipes. IMC Machines highly specialized and can be used solely for industry specific purposes. There are only a few companies in the world that fabricate this particular type of machine.
One company that has won much acclaim in the area ofconduit pipe threading machines.We have a large range ofthreading machines. The company has immense experience in the field of such machines.Also the same to ensure that the customers get value for the money that they are spending.
Material used for the purpose of fabrication is of high grade. There is an absolute assurance that there will be no issues during usage.
If one chooses to purchase aconduit pipe threading machinefrom a company that is reputed as the Industrial Machinery Corporation. The demand for these machines has grown manifold in the past few years.
A quality product always stands out in the market, and will always be able to create a niche for itself. This is exactly why thiselectric conduit pipe threading machine, unlike several others, has been able to satiate the requirements of numerous big organizations, by providing them efficient and relatively maintenance free service.
Conduit Pipe Threading MachineMODEL | 1/4" TO 1" (6MM to 25MM) (BED TYPE) | 3/8" TO 1.1/2" (10MM to 40MM) (BED TYPE) | 1/2" TO 2.1/2" (12MM to 65MM) (BED TYPE) |
Saddle Movement | 10" | 13" | 22" |
Spindle Speed Range | 75-140 | 75 -140 | 45 - 90 |
Number of Spindle Speed | 2 | 2 | 2 |
Threading Capacity | 1/4" to 1" | 3/8" to 1.1/2" | 1/2" to 2.1/2" |
Production per Hour | 60-80 | 60-80 | 70-90 |
H.P. Required | 3 H.P. | 3 H.P. | 7.5 H.P. |
Lead Screw | Optional | Optional | Optional |
Weight (KG) Approx. | 500 | 550 | 990 |
Additional Information:
Delivery Time : 15- 30days
We have a wide range of semi-automaticSteel TMT Chaser Rebar Threading Machinewhich is used for site projects and it does outside threading on TMT bars. Steel TMT Chaser Rebar Threading Machine threads the standard EN8-D TMT bar. The threading is done after the Rebar TMT bar forging process. Threading Machine is used for High Production.
Industrial Machinery Corporationhas been offering a High-Speed Steel TMT Chaser Rebar Threading Machine. This Rebar Threading Machine is made from high-density alloys. This machine is manufactured by our experts using excellent quality components and cutting-edge technology. This Threading Machine is used for saving time and effort. List of threads that can be cut using TMT Rebar Threading Machine: Metric, BSP, BSPT, NPT, UNF, UNC, BSW, Acme Threads, B.S.F. This Threading Machine has features like robust construction, high performance, and durability.
Steel TMT Chaser Rebar Threading Machine needs less maintenance and works for long hours. This Machine tool's cost is very cheap. We have gained all the vital mastery and specialized know-how to make the best Rebar Threading Machine arriving in the market. We assemble our Rebar Threading Machine with all the customizations as said by the customer preceding the beginning of production. If you need to buy the TMT rebar threading machine. Industrial Machinery Corporation is a great choice, as they not only offer a vast range, but also the assurance that each machine that is sent out of their unit is a piece of excellence.
Our TMT Rebar Threading Machines are running in various countries like Abu Dhabi, Algeria, Australia, Bangladesh, Bhutan, Canada, Central America, Colombia, Germany, Ghana, Jordan, Kuwait, Lebanon, Malaysia, Maldives, Mexico, Myanmar, Nepal, Peru, Philippines, Qatar, Saudi Arabia, South Australia, Sri Lanka, Thailand, Tunisia, Turkey, U.A.E, USA, Vietnam.
Steel TMT Chaser Rebar Threading Machine Specifications:Model | 1/4"to 1" (6MM to 25MM) (Bed Type) | 3/8"to 1.1/2" (10MM to 40MM) (Bed Type) | 1/2"to 2.1/2" (12MM to 65MM) (Bed type) |
Saddle Movement | 10" | 10" - 12" | 22" |
Spindle Speed Range | 75-140 | 75-140 | 45-90 |
Number of Spindle Speed | 2 | 2 | 3 |
Threading Capacity | 1/4" to 1" | 3/8" to 1.1/2" | 1/2" to 2.1/2" |
Production per Hour | 60-80 | 60-80 | 70-90 |
H.P. Required | 3 H.P. | 3 H.P. | 7.5 H.P. |
Lead Screw | Optional | Optional | Optional |
Weight (KG) Approx. | 500 | 550 | 990 |
IMC Tangential Threading Chasersare manufactured from imported High-Speed Steel which must pass exacting metallurgical standards. Experienced heat treatment with the automatically imported heat treatment plant and imported Testing equipment, assure that they will perform satisfactorily in service and produce quality threads within the tolerance for which they ware intended. These Tangential Chasers are used inRebar Threading Machine.
Additional Information:
Delivery Time : 15- 35 days
IMC Threading taps are specially designed tools used to cut the female portion of a mating pair of metal fasteners. AThreading Tapremoves material from a pre-drilled or punched hole. The result produces threads within the drilled hole. The cutting edges at the front of a tap remove material from the workpiece. The chips are stored in the flutes, or pushed forward in front of the tap, or drawn up along the flutes, removing the chips and cutting fluids from the hole.
A chamfer is a tapered portion at the front end of the tap. Both the chamfered portion and the first full thread beyond the chamfer produce the finished thread of the part.Industrial Machinery Corporationmanufactured Threading Taps as per industry standards and stands high on parameters of quality and durability.
Threading is divided into two types, internal and external.
Internal threading is done by using a tool called a TAP in a hole drilled to a specific diameter for the thread size and pitch you want to cut. External threads, such as bolts and studs, are made by using a tool called a DIE, which is applied to a specific diameter of the rod for the size and pitch of the threads you want to cut.
Taps and dies are tools used to create screw threads, which is called threading. Many are cutting tools; others are forming tools. A Threading Tap is used to cut or form the female portion of the mating pair (e.g., a nut). A die is used to cut or form the male portion of the mating pair (e.g., a bolt). The process of cutting or forming threads using a tap is called tapping, whereas the process using a die is called threading. Both tools can be used to clean up a thread, which is called chasing.
A Threading Tap cuts a thread on the inside surface of a hole, creating a female surface that functions like a nut.
Machine Tapping
The internalThreading Machineis used a tool tap for internal threading. Machine tapping is faster, and generally more accurate because human error is eliminated.
Although in general machine tapping is more accurate, tapping operations have traditionally been very tricky to execute due to frequent tap breakage and inconsistent quality of tapping.
The Threading Taps are offered by Industrial Machinery Corporation. Different types of Threading Taps can be used for internal threads such as BSW, NPT, UNF, METRIC, UNC, ACME, BSF Threads, etc. Industrial Machinery Corporation will also offer the benefit of customization
Additional Information:
Delivery Time : 15- 30days
IMC machines are truly sophisticated and are engineering masterpieces in their own right. Theinternal pipe threading machineon offer is manufactured as per industry standards and stands high on parameters of quality and durability. These are fabricated using high-grade raw material, which not only ensures that the machine will be able to resist wear and tear, but also prove to be resistant against breakage and abrasion.
A good gradeinternal threading machinewill have a system that is so advanced that little human intervention will be required. This will not only ascertain that the work done is completed with perfection, but will also reduce human effort. The way these machines are fabricated, the quality inspection team, ensures that there are no regular breakdowns, during operation.
Theinternal threading machineoffered by Industrial Machinery Corporation will allow for the cutting of 150mm thread length. The speed in the gear box is five, while it can produce up to eighty pieces per hour. While these are the basic specification, being a customer centric company. Industrial Machinery Corporation will also offer the benefit of customization.
Internal Pipe Threading Machine Specifications:Model No. | 1/2" to 2" | 1/2" to 3" |
Threading length can be cut | 150 MM | 150 MM |
Number of speed in gear box | 5 | 5 |
Production per hour | 80 Pcs. | 80 Pcs. |
Electrical Motor | 3 H.P. 960 RPM | 5 H.P. 960 RPM |
Additional Information:
Delivery Time : 15- 30days
Mig welding machinethat are useful in fixings objects or mounting on any suitable surface. These diode & mig welding machines are manufactured using extreme quality of precision and hardened ground parts. These have high gripping power and are widely demanded due to dimensional accuracy, durability and toughness.
Specifications:-ITEM | UNIT | MIG300 |
SUPPLY | V | 380 TO 415/ _+ 10% |
PHASE | PH | 3 |
FREQUENCY | HZ | 50/60 |
LOAD | KVA | 6 |
OCV(DC) | V | 22-48 |
OUTPUT STEPS | NOS | 8 |
CONTROL CIRCUIT | V | 42 |
TORCH | MODEL | AK-25(2.75 METERS) |
MOTOR | TYPE | PERMANENT MAGNET |
TORCH CONNECTOR | MODEL | EURO STANDARD |
WEIGHT | KG | 143 |
KEY FEATURE: - | FOR HIGHER PRODUCTION AND RADIO GRAPHIC WELDING |
Additional Information:
Delivery Time : 15- 35 days
Horizontal ledger welding machinedesigned to weld ledger blades together at the same time, machine hold and weld the blades proportional to each other. This unit is pneumatically operated for clamping the ledger blades with pipe and also the movement of welding torches, the machine has screw wheel drive to adjust the length from 500mm to 2500mm. As per own requirement. Machine itself has adjustments for different welding angles as 360 angle adjustments. Left to right adjustments & height adjustments available for better penetration.
Automatic Ledger welding machine is used to weld ledger blades with pipe without making any joint between them, It gives high production and accuracy to product. Ledger post are used with combination of Cup lock welding to make a structure. All the components are used in combination of each other. Base jack welding machine, Inner prop welding machine, Outer prop welding machine, Cuplock welding machine, Ringlock welding machine.
Specifications :-Ledger welding Double Side | |||
Electric Supply | Single Phase 220 Volt HZ 50/60 | ||
Speed | 2 to 10 RPM | ||
Motor Drive | AC Inverter Type | ||
Motor | Type AC 220-Volts-3-Phase | ||
Torch Clamping | PNEUMATIC | ||
Length Adjustment | 150 to 2400 mm | ||
Dimension | L x W x H 11.3x2.5x5.3 (Foot) |
Additional Information:
Delivery Time : 15- 35 days
We are a noteworthy manufacturer and provider of premium qualityBuffing Machinethat is accessible with us in various details. This machine has propelled support for polishing the materials, machine, and so forth. Known for the simple and advantageous task, this machine is generally acclaimed by our customers. It is definitely manufactured under the stern observation of our deft group by making utilization of value guaranteed materials. Aside from this, we are offering this Buffing Machine at reasonable costs to our customers.
Industrial Machinery Corporation is your one-stop destination to buy different Machinery online at best prices. Industrial Machinery Corporation assorts a wide range of Machinery products such as Threading Machine, Bar Threading Machine, Bolt Threading Machine, Rod Threading Machine, Rebar Threading Machine, Cuplock Welding Machine, Mig Welding Machine, Base Jack Welding Machine, Inner Prop Welding Machine, Outer Prop Welding Machines, Scaffolding Machinery Unit, Hydraulic Thread Rolling Machine, Power Press Machine, Scaffolding Pipe Threading Machine, Pipe Cutting Machine, Pipe / Rod Polishing Machine, Buffing Machine and other essentials at best prices online.
Buffing machines are generally used to improve the metal surface. Be it automobiles, machines or even glass,
Difference: Buffing Machine & Polishing
As both are comparable in applications, it is very common to confuse Buffing machine for the Polishing machine and the other way around. Toward the end, everything relies on the experts who utilize distinctive procedures which come surprisingly close to either polishing or buffing.
What is Buffing?
Buffing is the technique wherein you work on the surface of your car or any machine to improve its shine or appeal. It very well may be to expel any smudge, scratches and so on to ensure that the surface looks new. There are different sorts of Buffing method which incorporate Cut Buffing wherein the surface is cut and hued all the while, Color Buffing, then again, is utilized to give mirror-like shine to the surface with the assistance of buffing compounds.
What is Polishing?
Polishing is very similar to Buffing to a degree that both the methods include changing the surface. Be that as it may, Polishing can be the first phase of a Buffing procedure i.e. the surface is frequently polished before the Buffing procedure. Likewise, Polishing in some cases can end up being a coarser task to expel the swirl marks, pits and so on.
Tips to use Buffing Machine
L
Types of Buffers
Orbital Buffers: Orbital buffers are a perfect decision if you are looking to improve the shine without being stressed about the buffer swirl marks. It widely opts for the non-abrasive product applications. In any case, you can't achieve ideal results if you are looking remove the paint defects or oxidation.
Rotary Buffers: Rotary Buffers is the primary decision for experts. Particularly for the Automotive experts, Rotary buffers are accessible in varying range of speeds. If you are looking to purchase a Rotary Buffer for your car it is necessary that you think about the Buffing Speed and the kind of the vehicle.
Features:
Automatic Grade | Semi-automatic, Fully-automatic |
Power (HP) | 3 H.P., 1440 RPM |
Specifications : | |
Dia in Wire/Rod | 3 to 25 |
Dia in Pipe | 6 to 50 |
Abrasive Belt | 50 x 2000 |
Power of Motor | 3 H.P., 1440 RPM |
Approx. Weight in Kg. | 400/500 Kg. |
Floor space required | 27"x 20" |
Additional Information:
Delivery Time : 15- 45 days
Specifications : | IMC-ST-7 | IMC-ST-8 | IMC-ST-10 | IMC-ST-12 | IMC-ST-13 |
In Thickness of wire | 2 to 7mm | 3 to 8mm | 4 to 10mm | 4 to 12mm | 3 to 13mm |
In Length of wire to be cut automatically | As per Requirement | As per Requirement | As per Requirement | As per Requirement | As per Requirement |
Feeding capacity per min. | 70' feet | 70' feet | 70' feet | 60' feet | 60' feet |
Power of motor H.P. | 3 H.P. | 5 H.P. | 5 H.P. | 10 H.P. | 10 H.P. |
Required R.P.M. | 1440 | 1440 | 1440 | 1440 | 1440 |
Approx. Weight in Kg. | 410 | 460 | 550 | 1000 | 1200 |
Floor space required | 42"x18" | 48"x20" | 52"x20" | 60"x22" | 82"x22" |
Specifications : | IMC-ST-14 | IMC-ST-15 | IMC-ST-16 | IMC-ST-20 | IMC-ST-25 |
In Thickness of wire | 5 to 14mm | 6 to 15mm | 8 to 16mm | 10 to 20mm | 15 to 25mm |
In Length of wire to be cut automatically | As per Requirement | As per Requirement | As per Requirement | As per Requirement | As per Requirement |
Feeding capacity per min. | 60' feet | 60' feet | 60' feet | 60' feet | 40' feet |
Power of motor H.P. | 10 H.P. | 15 H.P. | 15 H.P. | 25 H.P. | 30 H.P. |
Required R.P.M. | 1440 | 1440 | 1440 | 1440 | 1440 |
Approx. Weight in Kg. | 1300 | 1500 | 2500 | 3000 | 3500 |
Floor space required | 91"x22" | 105"x24" | 125"x24" | 150"x27" | 180"x36" |
Additional Information:
Delivery Time : 15- 35 days
We specialize in manufacturer and supply variety ofCircular thread rolling diesas per customers specifications and requirements. Our assortment of products caters to any and all models of thread rolling machines. All our products are manufactured by us are as per international quality standard.
These thread rolling Dies are used on thread rolling machine. These Thread Rolling Dies comes in set of two and three pieces manufactured from D2, D3 and M2 Material to suit any type of machine. For any specification of thread such as ISO Metric Din Whiteworhth America, Trapozodical, Acme etc.
Additional Information:
Delivery Time : 15- 30days
We offer the premium quality Cold Heading Machine that gives high-volume production. The Cold Heading Machine manufactured, exported and supplied by us, is extremely durable as it is made from high grade raw material. It is designed using the advanced technology; hence it is maintenance free and has long functional life.
Advantages :The cold heading machine is extremely safe to use as the Cut-off and knock-out mechanism has various safety devices. Hence, even in the case of any irregular functioning, it avoids the accidents.
The Cold heading machine slide has a mobile design that carries two heading punches for the processes of straightening and finishing.
The two punches & dies are easily adjustable at the accessible points and can be operated manually.
Our cold heading machine has the vertical wire straightening bearing rollers designer equipment that enables straight wire feeding facilitating the processing of long bolt.
The various parts of the cold heading machines such as all rollers, roller pins, cames and are made high grade steel which is properly heat-treated and grounded.
It Produces :
.
Cold Heading Machine Specifications:Model No. | Capacity (Length x Dia) | Production (Per Minute) | Power Required (H.P x RPM |
IMC-CHM-2 | 2" x 1/4" (50MM x 6MM) | 80-85 | 3 x 960 |
IMC-CHM-2.5 | 2.5" x 5/16" (65MM x 8MM) | 70-75 | 5 x 960 |
IMC-CHM-3 | 3" x 3/8" (75MM x 10MM) | 60-65 | 10 x 960 |
IMC-CHM-4 | 4" x 1/2" (100MM x 12MM) | 45-50 | 15 x 960 |
IMC-CHM-5 | 5" x 5/8" (125MM x 15MM) | 35-40 | 20 x 960 |
IMC-CHM-6 | 6" x 3/4" (150MM x 20MM) | 25-30 | 35 x 1440 |
Additional Information:
Delivery Time : 15- 30days
The raw material used in the manufacturing of ourH Type Power Press Machineis drawn from the best and most reliable resources and prior to getting used, it is checked meticulously for and hidden flaw or fault. If any part is found defected or of low quality is straight away restricted from getting used. We love to maintain the quality of our H Type Power Press Machine to a sky height as we realize that the competition s stiff and there are many companies who are behind us and are trying continuously to leave us behind.
The technical staff working with us is alert day and night to make sure that the quality of our H Type Power Press Machine is unmatched and unparalleled with H Type Power Press Machine of any other company. We are proud of our H Type Power Press Machines which are considered best in terms of quality, efficiency, durability, compatibility, adaptability, strength and prices.
We use state-of-art technology and have the industrial expertise to construct these heavy-duty machines. Also, the speedy and accurate performance of Our H Type Power Press Machine has made the work simple for various Industries. Moreover, we are consistently marching ahead in providing products of international standard in this fiercely competitive market scenario. This not only ensures maximum customer satisfaction but also enables us in earning varied clientele in the international market. Our H Type Power Press Machine is widely accepted around the world in various industries sectors.
Specifications of H Type Power Press Machine :
Model | 10 Ton | 20 Ton | 30 Ton | 50 Ton | 75 Ton | 100 Ton | 150 Ton | 200 Ton | 250 Ton | 300 Ton | 400 Ton | 500 Ton |
Bed Size | 300 X 350 | 350 X 400 | 400 X 450 | 450 X 500 | 550 X 600 | 600 X 650 | 650 X 700 | 750 X 800 | 800 X 850 | 900 X 950 | 1000 X 1050 | 1100 X 1100 |
Bed To Ram Bottom | 250 | 250 | 300 | 375 | 400 | 450 | 465 | 500 | 550 | 600 | 650 | 700 |
Stroke Length | 55 | 60 | 80 | 95 | 110 | 125 | 150 | 160 | 175 | 200 | 200 | 200 |
Gear Dia | 450 | 525 | 600 | 650 | 750 | 850 | 1000 | 1050 | 1200 | 1200 | 1200 | 1250 |
Crank Shaft Dia | 70 | 80 | 90 | 110 | 125 | 150 | 175 | 200 | 225 | 250 | 300 | 300 |
Fly Wheel Dia | 525 | 650 | 700 | 800 | 900 | 1000 | 1100 | 1200 | 1300 | 1375 | 1500 | 1500 |
Hole in Ram Clamping Die | 25 | 28 | 32 | 40 | 45 | 50 | 55 | 60 | 70 | 80 | 100 | 110 |
No of Stroke per minute | 55 | 55 | 50 | 50 | 45 | 40 | 40 | 35 | 30 | 25 | 20 | 20 |
Power Required in HP | 2 | 2 | 3 | 5 | 7.5 | 10 | 15 | 20 | 25 | 25 | 30 | 35 |
Motor | 1440 | 1440 | 1440 | 1440 | 1440 | 1440 | 1440 | 1440 | 1440 | 1440 | 1440 | 1440 |
Additional Information:
Delivery Time : 15- 30days
TheAutomatic Rebar Coupler Drilling and Cutting Machineis use to drilling and cutting the rebar coupler according to the desire length required. The drilling and cutting of the rebar couplers is normally in 23 minutes. ThisRebar Coupler Drilling and Cutting Machineis used for high speed coupler making process.
Automatic Rebar Coupler Drilling and Cutting Machine they are building is made up the best quality raw material, using the best and latest technology and most advanced machine just to make this machine work for long years without any symptoms of system crash or malfunction. Owing to the unstoppable qualities of our hydraulic surface grinder machine like being best in accuracy, durability, efficiency, compatibility, reliability, handiness and extremely low maintenance cost we have became a very well-known company in the field of industrial machine manufacturing.
Specifications :-Max. Capacity Round Bar | 22 mm | 30 mm | 37 mm | 47 mm | 56 mm | 65 mm |
Hexagonal | 22 mm | 25 mm | 32 mm | 47 mm | 56 mm | 65 mm |
Square | 18 mm | 24 mm | 27 mm | 36 mm | 42 mm | 45 mm |
Maximum Turning Length | 40 mm | 45 mm | 50 mm | 60 mm | 70 mm | 76 mm |
Maximum Drill | 40 mm | 50 mm | 55 mm | 60 mm | 65 mm | 70 mm |
Electric Drive Motor | 2 HP 1440 RPM | 3 HP 1440 RPM | 3 HP 1440 RPM | 5 HP 960 RPM | 5 HP 960 RPM | 7 HP 960 RPM |
Additional Information:
Delivery Time : 15- 35 days
The first and foremost point of consideration, while purchasing aSurface Grinder Machine, or more specifically aHydraulic Surface Grinder Machineis that it should be purchased from a reliable organization. The longer the company has been in the market, the lesser the chances that their products are spurious or sub-standard. Such companies have invested a lot of time, money and effort in establishing their name, and would not want anything tarnishing it.
Standard Accessories
Optional Accessories
Model | SG - 200 | SG - 250 |
Working Surface Area Of Table | 200 x 500 | 250 x 550 |
Maximum Height from Table to Grinding Wheel | 225 | 225 |
Powe of Hydraulic Pump | 2 H.P. | 2 H.P. |
Spindle Speed | 2800 RPM | 2800 RPM |
Size of Grinding Wheel | 200 x 13 x 31.75 | 200 x 13 x 31.75 |
Electric Motor | 1 H.P. | 1 H.P. |
Weigh of Machine (Approx.) | 850 Kgs. | 950 Kgs. |
Additional Information:
Delivery Time : 15- 45 days
The pipe cutting machineremoves material from the pipe or tube to create the desired profile. Typical profiles include straight cuts, miters, saddles, and midsection holes. These complex cuts are usually required to allow a tight fit between two parts that are to be joined via arc welding.
Pipe Cutting Machine Specifications:-SPECIFICATIONS | IMC-500 |
PRODUCTION | 4000 TO 10000 (PCS /8 HOURS) |
MAX. DIA OF TUBE TAKEN | 65 |
SAW DIA | 10 Vi |
ELECTRICALS | 1.5 K. W/2 H.P. |
MACHINE DIMENSION | 800MM X 1300MM |
GROSS WEIGHT | 450KG. |
Additional Information:
Delivery Time : 15- 45 days
IMC AutomaticHead Trimming Machineis to make the Head of Bolt hexagon or square as per requirement. Thebolt head trimming and shank reducingMachine is fully automatic and easy to operate.Bolt head trimming and shank reducing machineryis made to fulfill various requirements with Bolts by the customers.
Specifications:
Model No. | Length Of Bolt | Dia. Of Bolt | Production Per Minute | Power Required (H.P x RPM) |
IMC-HTM-1 | 1/2" - 1" | 80-85 | 80 - 90 | 1 x 1440 |
IMC-CHM-2.5 | 1/2" - 2" | 70-75 | 60 - 80 | 3 x 1440 |
IMC-CHM-3 | 3/4" - 3" | 60-65 | 50 - 60 | 5 x 1440 |
IMC-CHM-4 | 1" - 4" | 45-50 | 40 - 45 | 7.5 x 1440 |
IMC-CHM-5 | 1.5" - 5" | 35-40 | 30 - 35 | 15 x 1440 |
IMC-CHM-6 | 2" - 6" | 25-30 | 25 - 30 | 20 x 1440 |
Additional Information:
Delivery Time : 15- 30days
Industrial Machinery Corporation is leading Manufacturerand Supplier of wide range of Power press machine. Power press machine are made of high grade material. Power press machine comes in two models C type power press machine and H type power press machine. The Power Press machine can be customize as per the requirement of the client. Power press is available in very reasonable prices.
The raw material used in manufacturing of our Power Press Machine is drawn from the best and most reliable resources and prior to getting used, it is checked meticulously for and hidden flaw or fault. If any part is found defected or of low quality is straight away restricted from getting used. We love to maintain the quality of our Power Press Machine to a sky height as we realize that the competition is tough and there are many companies who are behind us and are trying continuously to leave us behind. It is by the grace of the Supreme Personality of Godhead backed by our determination that no one has ever been able to surpass us. The technical staff working with us is alert day and night to make sure that the quality of our Power Press Machine is unmatched and unparalleled with Power Press Machine of any other company. We are proud of our Power Press Machines which are considered best in terms of quality, efficiency, durability, compatibility, adaptability, strength and prices. The frame of Power Press Machine is made of high quality chromed steel which is fabricated using rolled steel plates. Despite making high-quality Power Press Machines, we keep our prices considerably low and this is one more reason why we are most preferred by our clients. Industrial Machine Corporation has a sheer experience in manufacturing two varieties of Power Press Machine i.e. C type Power Press Machine and H type Power Press Machine.
The main difference both these variants of Power Press Machine is that the C type Power Press Machine can apply a pressure power of 3 tonnes to 250 tonnes where as the H type Power Press Machine can apply a force ranging from 10 tonnes to 250 tonnes. Otherwise maximum features of both the variants of Power Press Machine are similar. The user is given a whole range of customization options, which he can opt which suit their requirement and comfort level. Both the variants of Power Press Machine has automatic as well as manual lubrication, knock-out electronics hand safety equipment, single and double geared version, un-geared version is also available, and all these versions come with pneumatic feeders and straight and die-collars.
Specifications of Power Press Machine 'C' Type:Industrial Machinery Corporation offers C type power press, The Power Press Machine is use for mass production. The clutch of rolling key type which gives continuous strokes and produce mass production. Crack Shaft of Power Press Machine is make of alloy steel and fit in with gun metal bushes for long life and smooth working. In the Power press machine Ram and Table are align prefect to each other to obtain high precision press operations.
Model | 5 Ton | 10 Ton | 20 Ton | 30 Ton | 50 Ton | 75 Ton | 100 Ton | 150 Ton | 200 Ton | 250 Ton |
Bed Size | 275 X 375 | 300 X 450 | 375 X 525 | 400 X 600 | 500 X 750 | 550 X 800 | 600 X 900 | 700 X 1000 | 800 X 1150 | 850 X 1200 |
Bed To Ram Bottom | 225 | 250 | 250 | 300 | 375 | 400 | 450 | 465 | 500 | 550 |
Stroke Length | 50 | 50 | 60 | 80 | 95 | 110 | 125 | 150 | 160 | 175 |
Gear Dia | 350 | 450 | 525 | 600 | 650 | 750 | 850 | 1000 | 1050 | 1200 |
Crank Shaft Dia | 65 | 70 | 80 | 90 | 110 | 125 | 150 | 175 | 200 | 240 |
Fly Wheel Dia | 475 | 525 | 650 | 700 | 800 | 900 | 1000 | 1100 | 1200 | 1300 |
Hole in Ram Clamping Die | 22 | 25 | 28 | 32 | 40 | 45 | 50 | 55 | 60 | 70 |
No of Stroke per minute | 60 | 55 | 55 | 50 | 50 | 45 | 40 | 40 | 35 | 30 |
Power Required in HP | 1 | 2 | 2 | 3 | 5 | 7.5 | 10 | 15 | 20 | 25 |
Motor | 1440 | 1440 | 1440 | 1440 | 1440 | 1440 | 1440 | 1440 | 1440 | 1440 |
Additional Information:
Delivery Time : 15- 30days
AutomaticOuter prop welding machineis used to weld base plate with pipe and sleeve without making any joint between them, it gives high production and accuracy to product. Outer prop is used with combination of Inner prop and base jack to make a structure. All the components are used in combination of each other Base jack welding machine, Inner prop welding machine, Outer prop welding machine, Cup lock welding machine, Ring lock welding machine.
This system is based on circular welding on both base plate with pipe and pipe with threaded sleeve from both positions as from top side or inside of sleeve for fastest production and uniform welding and it helps operator be safe from burning skin of continuous welding process. This unit is base on 380 -415 volts 50-60 hz. Ac as input supply and control led with Siemens make plc system and motor drive, clamping of job and de-clamping is pneumatically operated for movement of welding torches.
Specifications :-Electric Supply | Single Phase 220 Volt HZ 50/60 | ||
Speed | 2 to 10 RPM | ||
Motor Drive | AC Inverter Type | ||
Motor | Type AC 220-Volts-3-Phase | ||
Torch Clamping | PNEUMATIC | ||
Length Adjustment | 150 to 2400 mm | ||
Dimension | L x W x H 11.3x2.5x5.3 (Foot) |
Additional Information:
Delivery Time : 15- 35 days
AutomaticInner prop welding machineis used to weld base plate with pipe without making any joint between them, It gives high production and accuracy to product. Inner prop is used with combination of Outer prop welding to make a structure. All the components are used in combination of each other Base jack welding machine, Inner prop welding machine, Outer prop welding machine, Cup lock welding machine, Ringlock welding machine.
This system is based on circular welding on both base plate with pipe and pipe with threaded sleeve from both positions as from top side or inside of sleeve for fastest production and uniform welding and it helps operator be safe from burning skin of continuous welding process. This unit is base on 380 -415 volts 50-60 hz. Ac as input supply and control led with Siemens make plc system and motor drive, clamping of job and de-clamping is pneumatically operated for movement of welding torches.
Specifications:-Electric Supply | Single Phase 220 Volt HZ 50/60 | ||
Speed | 2 to 10 RPM | ||
Motor Drive | AC Inverter Type | ||
Motor | Type AC 220-Volts-3-Phase | ||
Torch Clamping | PNEUMATIC | ||
Length Adjustment | 150 to 2400 mm | ||
Dimension | L x W x H 11.3x2.5x5.3 (Foot) |
Additional Information:
Delivery Time : 15- 35 days
Automatic Base jack welding machine is used to weld base plate with pipe without making any joint between them, It gives high production and accuracy to product. Base jack welding machine welds solid jacks, Tie rods, Hollow jacks with base plate. Base jack are used with combination of Cuplock welding to make a structure. All the components are used in combination of each other Base jack welding machine, Inner prop welding machine, Outer prop welding machine, Cuplock welding machine, Ringlock welding machine
Base jack welding machineis designed to increase production and quality of welding on solid threaded bar and hollow threaded pipes with base plate of any size and shape and u-base of any size and shape, however the machine has capability to weld up to 1200 pieces in 10 hours of working shift , there is no need to make welding tag pipe or solid with base plate and u-base, on the other hand machine has the adjustments if any ovality comes in job. suitable from the length 300mm to 1000mm and sizes from 28mm to 48mm, length adjustment with screw drive.
Cups and Lock Pins Tagging Machine is Designed to increase the Production and for proper placement of Cups and Pins as per Standard. This unit helps in Aligning the Position of Cups to equal distance as 500mm.
This unit is pneumatically operated for clamping and de- clamping of vertical Cuplock , we suggest making one tag on each cup and final welding on lock pins , Once Job shifted to Final Welding Machine, the job will be directly shifted to Painting section.
Additional Information:
Delivery Time : 15- 35 days
A good gradeLanco Type Threading Die Headwill have a system that is so advanced that little human intervention will be required. This will not only ascertain that the work done is completed with perfection but will also reduce human effort. The way these Lanco type threading die head are fabricated, the quality inspection team, ensures that there are no breakdowns, during operation.
We are reckoned among the bestLancoTypethreading die headmanufacturers in India. Lanco Type Threading die head manufactured by us is passed through stringent heat treatment in our advanced imported treatment plant. This threading die head is available in an assortment of types with us such as Lanco type pipe threading die head, Lanco type bar threading die head, Lanco type bolt threading die head and Lanco type rebar threading die head, Lanco type rod threading die head, Lanco type pvc pipe threading die head and Lanco type bar threading die head. These threading die head are efficient enough to give high performance in loner use. We facilitate our clients by providing easy accessibility of these threading die head at most reasonable prices.
Constructed of specially selected alloys steel, the IMC Die Head are recommended for threading upto and including class 3 tolerances and are well known for their ability to cut coarse pitch threads in a single pass. They have wide range converge, permit rapid set up, gives trouble free operations.
| Lanco Type Die Head Capacity2.1/2" to 6"4" to 8" |
Specifications:
Die Head Size | Holder Set/Sets (Provided) | Chaser Section |
1/4" to 1" Capacity Die Head | 1/4" to 1" | 3" x 1.3/64 (Set of 4 Pcs) |
3/8" to 1. 1/2" Capacity Die Head | 3/8" to 1. 1/2" | 4" x 1.3/64 (Set of 4 Pcs) |
1/2" to 2.1/2" Capacity Die Head | 1/2" to 1. 1/2"1.5/8 to 2.1/2" | 4" x 1.1/4"(Set of 4 Pcs) |
1" to 4" Capacity Die Head | 1" to 2"2.1/2" to 4" | 4" x 1.1/4" (Set of 4 Pcs)5" x 2.1/4" (Set of 4 Pcs) |
2.1/2" to 6" Capacity Die Head | 2.1/2" to 3"3.1/2" to 4"4.1/2" to 6" | 5" x 2.1/4"(Set of 6 Pcs) |
4" to 8" Capacity Die Head | 4" to 5.1/2"5.1/2" to 8" | 5" x 2.1/4" (Set of 6 Pcs) |
Additional Information:
Delivery Time : 15- 30days
While there are a number oflathe machinesavailable in the market today, there are some that are specialized and can be used only for specific purposes. These are used for specific purposes and are meant for certain industries.
Standard Accessories
Optional Accessories
| Lathe Machines | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Specifications |
|
Standard Accessories
Optional Accessories
Specialization
| Lathe machines | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Specifications |
|
Standard Accessories
Optional Accessories
| Lathe machines | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Specifications |
|
Standard Accessories
Optional Accessories
| Lathe machines | |||||||||||||||||||||||||||||||||||||||
Specifications |
|
Standard Accessories
Optional Accessories
Specialization
| Lathe machines | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Specifications |
|
Additional Information:
Delivery Time : 15- 45 days
Pipe End Facing Machineis used for the purpose of Chamfering and Deburring of the Pipe before Galvanizing and Threading Operation. Pipe is chamfered from the Outer, Inner and Front face by Three different tools. The Pipe remains Stationery and the Facing Head rotates. Slide Travels towards Facing Head for Chamfering manually. The Machine mainly consists of the following: -
Bed
Head Stock
Clamping Vice
Saddle
Model No. | IMC-EM- 1/2" to 1.1/2" | IMC-BM-1/2" to 4" |
Min. Dia of Pipe to be Chamfered | 1/2" N.B. Pipe | 1/2" |
Max. Dia of Pipe to be Chamfered | 1.1/2" | 4" |
Cutting Tools Required (HSS 10% Cobalt) | 3/8" | 3/8" |
Number of Spindle Speeds | Two nos. | Four nos. |
Range of Spindle Speeds | 37 to 64 RPM | 68 to 180 RPM |
Main Motor | 3 H.P. 1440 RPM | 3 H.P. 1440 RPM |
Approx. Wt. of the Machine | 750 Kgs. | 1100 Kgs. |
Industrial Machinery CorporationPipe Beveling Machineis used for the purpose of beveling the Pipe End. Pipe is Beveled from the Outer and Front is faced by two different tools. The Pipe remains Stationery and the Beveling Head rotates and comes out of the Head Stock for cutting the Pipe End. The Pipe Beveling Machine mainly consists of the following:BedHead StockClamping ViceBeveling Head.
BED: -
HEAD STOCK: -
CLAMPING VICE: -
BEVELING HEAD: -
Note:- One set of Round Type Clamping Jaws will be provided with the machine. Other Round Type Clamping Jaws are Optional and will be supplied at an extra Cost.
Model No. | IMC-BM-4" to 8" | IMC-BM-6" to 16" |
Capacity of the machine for Beveling Min. | 4" N.B. Pipe | 6" N.B. Pipe |
Capacity of the machine for Beveling Max. | 8" N.B. Pipe | 16" N.B. Pipe |
Outer Dia of the Sleeve | 200 mm | 300 mm |
Main Spindle Bearings (Taper Roller) | 32218 & 32219 | 32228 & 32226 |
Number of Spindle Speeds | Four Nos. | Four Nos. |
Cutting Tools Required (HSS 10% Cobalt) | 3/4" (Carbide Tool) | 1" (Carbide Tool) |
Max. Travel of the Sleeve | 90 MM | 90 MM |
Main Motor Approx. Weight (KG) Of the machine. |
15 H.P. 960 RPM 2800 |
20 H.P. 960 RPM 8000 |
Well designed Industrial Machinery CorporationCenterless Grinding Machineis offered at affordable prices. We are recognized as a reliable Automatic Centerless Grinding Machine Supplier, Manufacturer and Exporter. The Centerless Grinding Machine is known for its compact design and efficient performance. We make available these Centerless Grinding Machines anywhere in the world, promptly.
CGM - 25 | CGM - 75 | CGM 75 | |
Max Grinding Dia | 25 | 75 | 75 |
Min Grinding Dia | 2 | 3 | 3 |
For Taper Work | 5 Degree | 5 Degree | 5 Degree |
Grinding Wheel Size (D x W x M) | 300 x 80 x 140 | 350 x 100 x 127 | 350 x 100 x 127 |
Regulating Wheel Size (D x W x M) | 200 x 80 x 75 | 230 x 100 x 76.2 | 230 x 100 x 76.2 |
No. of Speed of Regulating Wheel | 3 | 3 | 3 |
Grinding Wheel Head Motor | 3 H.P./1440 | 5 H.P./1440 | 7.5 H.P./1440 |
Regulating Wheel Head Motor | 0.75/1440(V) | 1 H.P./1440(V)/td> | 1 H.P./1440(V) |
Coolant Power Motor | 0.10 H.P. | 0.10 H.P. | 0.10 H.P. |
Weight (Approx) | 1350 Kg | 1600 Kg | 1700 Kg |