Industrial Fabricators

Gidc, Vapi, Gujarat

We are dealing in stainless steel dryers, or we can supply as per client requirement, We manufacture a wide range of Vacuum Tray Dryerwhich are made of qualitative raw materials. This ensures the durability and reliability of our range, our products are of industry leading price and can be customized as per the customers.Our range of Tray & Vacuum Tray Dryer is manufactured from quality raw material and is designed for uniform circulation of hot air in the drying chamber. These are available in capacities ranging from 6, 12, 24, 48, 96, 192 Trays. These are ideal for various Drying applications in Pharmaceuticals, Chemicals, Food, Cosmetic Products and Vegetable drying.

Rotary Vacuum Dryers (RVD) also known as Vanuleuth Dryer, is a cylindrical jacketed vessel with a central agitator having specially designed blades. The blades of this Rotary Vacuum Paddle Dryer (RVPD) are so designed that they sweep the entire internal surface and at the same time turn the material so that all the particles are come in contact with the heated surface. The central agitator shaft is supported on the two end bearings housed in bearing housing in such a way that the alignment remains always intact. This central agitator is driven by means of a Motor & Gear box through the bull Gear.Cooling could also be provided by cold water / brine refrigerant through the jacket.The horizontal shell is jacketed to heat the shell with steam / hot water or any other thermal fluid. Limpet coil is provided instead of jacket if the heating media is fluid. A Dust Catcher consisting of bag filter is provided on the top to prevent the losses of material particles after the drying process.A Condenser of adequate heating surface area is provided wherein the evaporated vapors are condensed and these condensed vapors are then collected in the receiver of suitable capacity, placed beneath the condenser.A Vacuum Pump of adequate capacity is provided & fitted to the receiver of these rotary vacuum dryers to create the vacuum in the dryer shell through the Receiver, Condenser and Dust Catcher.  Salient Features of Rotary Vacuum Dryers (RVD)     Very suitable for drying materials which are heat sensitive, as low temperature for drying can be maintained by high vacuum     Lowest energy consumption compared to any other batch type dryer due to higher differential temperatures.     Higher Thermal Efficiency.     Almost 100% recovery of solvents.     Heating Temp.: From 30°C to 300°C.     Evaporation Rate : 4.12 Kg/ HrlSq. Meter of Heating surface area of water at heating temperature of 100°C.     Limpet coil could be provided instead of jacket if the heating media is fluid.     Breaker bars of approximately same length as dryer shell can be provided if lump formation is expected during drying.
 

These are widely used in Powder coating, Paint baking, Varnish Baking, PVC curing, Lacer Coating, Teflon coating & all kind of Paint Shop.

 

Advantages : Available in Batch type or Conveyorised type. Available in variety of sizes. Low maintenance Cost. Low running cost. Dynamically balanced blower for uniform temperature. High quality insulation to eliminate heat loss. Provided with exhaust dampers for fume outlets. 

Industrial Fabrication offers wide range of Conveyorised type Powder coating and liquid painting plants. Our ovens are specially and built for Powder & Liquid curing purposes assuring you of low power consumption with uniform temperature throughout the working space in the oven.

Specifications :    
This type of system is used where product is to be hanged for continuous transportation inside the oven.This system is widely used for powder coating and liquid spray painting.Welded or modular construction with high quality thick gauge MS sheet.    
Dynamically balanced blower for hot air circulation to achieve uniform temperature throughout the working chamber.Heat resistant paint inside the working chamber.

Specifications :
    
This type of system is used where product is to be hanged for continuous transportation inside the oven. This system is widely used for powder coating and liquid spray painting.  Welded or modular construction with high quality thick gauge MS sheet.    
Dynamically balanced blower for hot air circulation to achieve uniform temperature throughout the working chamber. Heat resistant paint inside the working chamber.

We offer clients precision designed range of Rotary Reck Oven, These feature relatively short heating up time and have superior process control facilities and provided by us can be made available in varying capacities to suit the specific requirements of our clients. Our company is engaged in manufacturing rotary rack oven diesel/ gas fired of premium quality. These are available in different models and sizes as per the requirement and specifications of the clients. They are available at market's leading price and are delivered with in the committed time span.

 Some of the key features of our rotary rack oven diesel/ gas fired are as follows :     Fast heat up     Low fuel & energy consumption     Durable, sturdy and efficiently     Even baking and efficient steaming system     Easy to use and maintain     Highly efficient insulation     Heat resistant tuff glass on door for clear viewing     Available in front stainless steel/inner and outer stainless steel construction     Folding units for easy lifting & assembly at any floor(optional)     Analog/ programmable control pannel (optional)

 Some of the key features of our rotary rack oven diesel/ gas fired are as follows :     Fast heat up     Low fuel & energy consumption     Durable, sturdy and efficiently     Even baking and efficient steaming system     Easy to use and maintain     Highly efficient insulation     Heat resistant tuff glass on door for clear viewing     Available in front stainless steel/inner and outer stainless steel construction     Folding units for easy lifting & assembly at any floor(optional)     Analog/ programmable control pannel (optional)

Conveyor Oven

We are amongst the renowned supplier and installation service provider of belt conveyor ovens that are used for tempering, annealing, curing, preheating, and drying processes. Our range comprises chain conveyors, chain-edge, mesh belt, flat belt style, serpentine, chain-on-edge, slat type, and other arrangements, as well as multi-tier conveyor ovens. We can also custom make oven to suit the requirements of clients existing conveyor. Our range of belt conveyor ovens is generally used in the shrink film packaging industry as shrink tunnel conveyor ovens.For annealing and hardening of large parts, like heavy cast parts or tool steel dies to temperatures between 800° C and 1200° C, we recommend our bogie hearth furnaces with radiation heating. The bogie can be conveniently loaded outside the furnace. With a second door or bogie transfer system, one bogie can be charged outside the furnace while the other bogie is in the furnace. This way, turnaround time between process cycles will be reduced substantially. Conveyor Belt Types :These ovens make use of various types of conveyor belts, such as mesh belts, flat wire belts, and others, in material such as high carbon steel, stainless steel, stainless alloy and polypropylene. 
Airflow Styles :Our equipment includes a supply duct to deliver the heated air to the product in a top-down flow pattern, a bottom-up pattern, or a top-bottom patternThe duct spans the full width and length of the heating chamber, so the product is heated during its entire travel through the oven This insures maximum performance and temperature uniformity

      
Temperature Ratings and Construction :Our ovens and furnaces are available with continuous maximum temperature ratings up to 500° C

      
Temperature Uniformities :     We design each unit as per client's specific requirements     Guaranteed temperature uniformities of +/-10°C, available, and includes certification testing before shipment

      
Heat Sources :     Our equipment is available in gas fired, electric, steam and other heat sources

      
Options Available :     We offer in-line washers, forced air cool down systems, refrigerated air cool down systems, air blow-off units, temperature recorders, fume incinerators, and many other optional items     We provide a wide variety of standard options to satisfy most applications, including special temperature controllers, chart & paperless temperature recorders (as well as other data acquisition equipment) and process timers
 

 
Shrink Packing Oven

Professional Packing for your product. Easy to operate, low maintenance, Economical cost of operation.

Features :     High effiecncy Heaters     Cooling Blower     Simple and Efficient speed control     Perfect Temp.Control     Custom Built Shrink wrapping system avalible .

 

Optional :     Extended tunnel infeed/outfeed     Pressure Rollers above extened tunnel outfeed.     Teflon netting belt conveyor.     Adjustable Clearance in height.

Pharmaceuticals Oven
It is widely used in pharmaceutical food, chemical industry etc. Which baked and dehumidified to material.Its work principle is that used steam or electric heating air, then made a cycling dry with heated air. There are even dry and lower discre-paney of temperature difference in the each side of even. In the dry course of suppling continuously flesh air and discharging hot air so that the even might be in good condition and kept proper temperature and humidity.It is suitable for heating and solidification, drying and dehydrtion of raw materials in pharmaceutical industry, chemical industry, foodstuff industry, agricultural and sideline products, aquatic products, light industry, heavy industry and so on. The raw materials can be medicines of raw materials, Chinese traditional medicines, tablet of drink, immersed electuary, powder, granule, packing bottle, pigment, dyestuff, dehydration vegetable, dried fruit and melons, banger, plastic resin, electric elements, drying varnish snd so on. 

 The consumer may choice a lot of heat source, steam, electric etc. Used temperature:50-150 with steam heated. 50-350 with electric and far-infrared heated. Epuipped computer control systed. Steam pressure 0.02-0.8mpa(0.2-8kg/cm2). Electric heated power 15kw, 5-8kw/h(l). If you have special repuirement, please asked. Used tempreature less 60 or higher 140 please mention it you place order. Unified size of oven and plate, may be exchanged. The size of oven plate is 460*640*50mm.

Chemical ovens

Our Chemical ovens are useful as they are used for functioning of varied chemical industries for varied experimentation and manufacturing processes which require heating. These Chemical ovens are being provided to our clients with customized solutions to ensure their complete satisfaction.


The salient features are as follow :Comprises of double walled structure with the inner chamber being made up of aluminum and stainless steel sheet
The outer body is made up of thick mild steel sheet There is a gap of 7.5 cms between the chamber and the body filled with good quality of glass wool for proper insulation
An air ventilator is also provided at the top of the oven to prevent its over heating The chamber has 2/3 adjustable shelves for easy operation
It also has double walled door which is fitted with an automatic roller
It has To and FRO latch the body, which is finished with gray hammer-tone or white paint
Does not have a thermometer but is provided with a continuous variable thermostat which controls the temperature from 10° C above ambient temperature to 250°C within the accuracy of 1°C
A heating element is wounded along with sides and bottom of the oven
Complete with two pilot lamps cord and plug pin etc
Works on a voltage of 220/230 volts 50 Hz. A.C

We also offer a precision engineered range of Slat Belt Conveyor which are used for loading and unloading of finish goods, charging of material.These conveyors can easily transfer small to medium size injection molding machines and their flat belt surface can be used as a table for finishing job.

Our range of material handling equipment comprises slat conveyors which is used or heavy as well as light duty. Light duty slat conveyor is widely used in bottling plants for filling and sealing lines and can bend up to 35 degree in any direction. This type of conveyor is fabricated using SS304 and SS316 contact parts is also applied for Filling, Caping, Sealing and Stamping procedure in Pharma / Cosmetic / Dyes /Soap Industries.

Heavy Duty Slat Conveyor is fabricated using superior quality M.S. or SS304 and is used for loading/ unloading purpose for Boxes, Bags and Automobile Components etc.

These vertical conveyors are used for carrying heavy loads and ensure smooth and safe transfer of materials.

Application areas :
	Airports
	Chemical industries
	Glass manufacturing plants
	Assembly Lines

 

We also offer a precision engineered range of belt Conveyors which are used for loading and unloading of finish goods, charging of material.These conveyors can easily transfer small to medium size injection molding machines and their flat belt surface can be used as a table for finishing job. A professional bag closing conveyor system built around the Series sewing heads. The system features a conveyor system with speed of 20 meters per minute (1000 bags per hour). The sewing head is controlled using a powerful electromagnetic clutch brake combination to ensure prompt run stop response from the press or release of the electric foot pedal.The screw lead inside the pillar is fully enclosed from dust. Rotating the wheel requires minimum effort to adjust the height of the sewing head from 250mm to 1000mm from the conveyor belt.
Pillar with optional drive motor is also available to control sewing head height using an up/down electric switch. Low speed 2.Profile ID : 3901913 Amount : 18100.00 Company Name : INDUSTRIAL FABRICATORS has been raised electric motor (940rpm, 3 phase) for operating the conveyor belt produces enormous torque to carry several number of filled bags placed on the conveyor at the same time with ease.
BELT conveyor system is also available with specifications given by the customer and can also be used with other conveyor sewing heads

Belt Conveyor
We manufacture belt conveyor which is used for paking, labeling or sampling various industries and provides a easy transportation of goods

Specifications :     Conveyor : Belt Type     Travel speed : 6 to 20m per minute ( using speed adjustable pulleys)     Available conveyor length : 3, 4, 5, 10 meters or as specified by customer     Available belt width : 300mm, 350mm, or as specified by customer     Sewing head height adjustment : 250mm to 1000mm     Electric motors : Available in 110V or 220 240V, Conveyor - 1hp, 3 phase, 2800rpm     Sewing head operation : Electromagnetic clutch brake combination system control

 

Electric for switch     Net weight : 3 Meters - 300 Kg.
 

Industrial Blowers
The Ring Blowers are suitable for all those applications requiring considerably higher pressure. Side Channel exhausters are used in all those applications requiring an operating vacuum higher than the one achievable by a fan, but not as to require the use of a vacuum pump. The rotating parts are not in contact with the casing. Therefore, no friction during operation and thus no internal lubrication is necessary. The other main features are: 
 
    

Higher pressure ratio     100% oil-free air     Low noise level (65dba Normal, 85 dba Max.)     140% Overload protection     ±10% Voltage fluctuation tolerance     Rated for continuous duty     IP 54 Protection     Class F insulation     Pressure die casted body, impeller & rotar     Low temperature rise     No, vibration, and therefore complete     Pulsation- free discharge     Cooler running, double sealed NSK (Japan) bearings

 

Applications:The Ring Blowers are suitable for very wide field of application some of them are:      Pneumatic conveying of solids/liquids     Vacuum transfer of components/sheets     Blowing away debris/sucking away debris     Sorting/counting of cards/envelopes/papers     To suck debris/gases from clean rooms/enclosed spaces/tunnels/laboratories     To agitate and aerate water in spa/whirlpool/swimming pool/fishing tanks/aqua culture

Tanks     Furnace fuel burning     Beverage bottling/labeling drying     Medical/dental suction units
 

Horizontal Storage Tank

We fabricate a wide assortment of MS/SS storage tank that are available in different capacities and types. Corrosion resistant and durable, our range of storage tanks are manufactured using M.S & S.S form. Demanded widely across diverse industries, our range can be customized as per the requirements of our clients.

Use Easily store in bulk quantity Stores various type of chemical industries and pharmaceutical industries for processing and storage of their products.SURAT (ST) 

Types of storage tanks     Horizontal     Vertical     Above ground     Underground

We fabricate a wide assortment of MS/SS storage tank that are available in different capacities and types. Corrosion resistant and durable, our range of storage tanks are manufactured using M.S & S.S form. Demanded widely across diverse industries, our range can be customized as per the requirements of our clients.

Use Easily store in bulk quantity Stores various type of chemical industries and pharmaceutical industries for processing and storage of their products.

Types of storage tanks Horizontal Vertical Above ground Underground

We desing scrubbing system for any tepe of hazardous fumes like H2S04, HCL, SO2 NH3, No3, etc For designing of efficient scrubbing system following data is required from the client depending on which the type of scrubber is decided.

Quantity of gas. Area. Type of gas Flow of gas Depending on this data the scrubbing systems designed

Now a days pollution control norms have changed hence, air pollution control system has become one of the prime necessity for many industries where emission of various hazardous gases takes place. An entire scrubbing system consists of

Scrubber. Blower. Piping & ducting. Dampners. Hood. Fume extraction system. We are proud to inform you we have recently installed entire scrubbing systems in Daman.

 

 Effluent Treatment Plant(ETP)

We offer effluent treatment plant (ETP plant), which is useful to remove the unwanted & harmful chemicals from the waste water. We are instrumental in offering our clients with effluent treatment plant equipment that are appreciated for having sturdy construction and resistance to corrosion. These ETP plant are manufactured in compliance with stated industrial quality standards and are thoroughly inspected by our quality analysts before being delivered to the clients. These are used in diverse industries and are widely acclaimed among our clients.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Dust Collecting System

We offer excellent quality Dust Collector that is designed with extreme quality material which is procured from our renowned vendors. We offer these Dust Collectors in different sizes & designs. These Dust Collectors are renowned for collecting complete dust from gas & air, high quality, corrosion abrasion and durability. We do quality checking of these Dust Collectors before delivering these to our valuable clients.

 

Our Dust collector posses following important features :

	High efficiency
	Durable
	Sturdy
	Reliable
	Trouble free performance
	Long operational life

 

Specification:

	In media type filter, the dust filtration range varies from 100 micron to 1 micron.
	The dust collection capacity ranges from 150 cfm.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Hot Air Generators

Industrial Fabricators manufacturers direct and indirect type Hot Air Generators. The hot air generators are used for obtaining hot processed air for Dryers, Ovens, Spray Dryers and various other applications.Direct fired HAG are designed for temperature upto 900C, whereas Indirect fired HAG have temperature upto 400CThe burners are equipped for variety of fuels like Liquefied Petroleum Gas (LPG), Natural Gas (NG), Furnace Oil (FO), High Speed Diesel Oil), Light Diesel Oil (LDO) and Kerosen

Hot Oil BathHot oil bath or Oil Heating unit is specially designed equipment used for providing indirect heating in most cases. Industrial Fabricators Hot Oil Bath (IFHOB) is a very intelligently designed device which is very compact and very handy to use. Our IFHOB has been a remarkable success in the field of technological advancement and safety. As its Name Suggestsit is a device used to heat the thermic fluid oil at a given rate and circulate it through the application area. The pump used in this device is of best quality and highly durable and withstand high temperatures. IFHOB has been aided with a set of revolving wheels so that it adds to its mobility and convenient nature. IFHOB comes with an ability to be placed very near to the application area, this is a very big advantage of our IFHOB, by this there are no Pipe line cost, No Maintenance work for long pipe lines, No leakage or insulation problems. IFHOB comes with a very superior control panel which has all the safety features and makes the device extremely sensible as well as very effective. The heaters are of high quality which last long and provide efficient heating. It saves a lot of valuable money time as well as man power, When you require only one of your device where indirect heating is required you dont need to start the Huge boilers or thermo-packs instead you can use our IFHOB. The Cost of operation of a huge boiler or thermo-pack for operating a single device or equipment is very costly as well as time consuming. In most of the cases our IFHOB gets to the set point at the application area very quickly (Depending up on Model as well as Type of Oil, Distance from IFHOB etc). The System is designed in such a way that maintenance can be very easily carried out. There are three models of IFHOB namely IFHOB24, IFHOB36 & IFHOB48. We also make these systems as per customers requirement.