Vibrating Fork Level Switch in Indore

• PNP-NPN with DC Supply : 12 to 60 VDC
• Remote Electronics : Level Sensor End, Level Switch End
• Frequency (Hertz) : 50HZ
• Two wire 8/16 mA Signal : 4-20 mA Active Analog Input, <8mA & >16mA Output to drive Analog Input
• Usage : Level Switches
• Universal In DPDT Output : 15 to 80 VDC, 15 to 260 VAC
• Compact Process Connection : starting from:-1" & M30
• Two-wire AC with Series Relay : 18 to 260 VAC

Operating Principle : Electronics of LSV excites the piezo-electric-crystals inside tuning fork, which makes the fork tines vibrate at their natural resonance frequency in free air. Amplitudes of vibration are above threshold when tines are free to vibrate. When material touches fork tines, vibration stops as more...

• Max. Viscosity : 10, 000 cStokes (= cPose/(g/cm3)) (Higher viscosity available on request)
• Extended Process Temperature : -30°C ... 150°C (-22°F ... 302°F) (extensions & heat sinks required)
• External Indication : Red LED : Alarm Indicator, Green LED : Power On Indicator
• Enclosure Material : SS316
• Ambient Temp. : -20°C ... 70°C (-4°F ... 158°F)
• Sensor Insertion Length : LFV12 : 50 mm excluding threads
• Material & Length : 000mm, 50mm to 3
• Process Pressure : Absolute / max. 15 bar
• Enclosure Protection Class : IP-65/67 as per IS-13947
• Process Connections LFV12 (Material SS316) : Threaded NPT / BSP ½", ¾", 1" Tri-Clamp 1"...1½", SMS Union 1" Flush Mounting 1", 1½"

Operating Principle : Electronics of LFV excites the piezo-electric-crystals inside tuning fork, which makes the fork tines vibrate at their natural resonance frequency in free air. When fork tines are immersed in liquid, the frequency of fork vibration falls due to the density of liquid. This change in frequ more...

• Ambient Temp. : -20°C ... 70°C (-4°F ... 158 °F)
• Process Temp. : -20°C ... 80°C (-4°F ... 176 °F)
• Process Connections : NPT / BSP / Hygienic ½", ¾", 1", 1¼", 1½", & Flanged ANSI/JIS/DIN/ASA/custom
• Extensions Tube : SS 304, SS 316, SS 316L
• Temperature : (extensions & heat sinks required)
• Material & Length : 50mm to 3,000mm
• Max. Viscosity : 10,000 cStokes (= cPose/(g/cm3)), (Higher viscosity available on request)
• Process Pressure : absolute / max. 15 bar
• Vibration Test : As per IEC 60068 part 2-6 sinusoidal, 10-55Hz, 0.15mm
• Extended Process : -30°C ... 200°C (-22°F ... 392 °F)

Operating Principle : Electronics of LFV excites the piezo-electric-crystals inside tuning fork, which makes the fork tines vibrate at their natural resonance frequency in free air. When fork tines are immersed in liquid, the frequency of fork vibration falls due to the density of liquid. This change in frequ more...

• MOQ : 1 Piece
• Surface Finishing : Polished
• AC & DC Voltage : 110V
• Design : Standard
• Specialities : Rust Proof, Heat Resistance
• Phase : Single Phase
• Country of Origin : India
• Packaging Type : Box

Trumen LFV Vibrating Fork Level liquid level switch used in all liquids, It detects the point level switching measurements reliably. for all liquids, independent level switch and it detects. LFV level switch is used as protection device of Hi and Low level switching in liquid applications. This level switch c more...

• Surface Finishing : Polished
• No Of Switch : 2 Switch
• Packaging Type : Box
• Mechanical Life : 1 Year
• Country of Origin : India
• Design : Standard
• Specialities : Rust Proof, Heat Resistance
• AC & DC Voltage : 110V
• Usage : Office, Home

Trumen LSV is a vibrating fork level switch used in free-flowing powders and granules size upto max. 10 mm. This vibrating fork is ideally for solids and low bulk density materials. It detects the point level switch measurement reliably. LSV level switch is used as protection device of Hi and Low level switch more...

• Supply Type : Manufacturer
• Supply Voltage : 12 V DC to 30 V DC
• Probe : Sensing Fork, SS316
• Mounting : 1/2’” SS 304(standard)......SS 316(optional) 3/4”NPT and above 3/4”.........(optional)
• Housing : Cast Al, WP, IP66(standard) , Flameproof(optional)
• Cable Entry : 1 X PG11
• Extension Pipe : SS304(Standard), SS316(Optional)
• Output : DC universal transistor, PNP and NPN, NO/NC

Our Honeybee Fork Level Switch is commonly applied for all types of liquids. The insertion length of this product is standard i.e. 70MM including thread to 3000MM. This requires power consumption of 12 V DC to 30 V DC. Its other technical specifications include sensing fork and SS316 probe as the in more...

• Output : 2 sets of potential free c/o contacts rated at 5 amps, 230VAC for resistive loads per switch point.
• Options : Integral, Two part
• Wetted Parts : SS304/316
• Bulk Density : > 0.5KG/cm3
• Enclosure : Cast AI x IP66 or Ex-P IIB
• Max Pressure : Upto 40KG/cm2
• Supply Type : Manufacturer
• Max Temp : 150° C

Principal A tuning fork made of SS 316 L is kept vibrating at its resonant frequency of approx. 125 Hz(standard) by piezo ceramic elements. when the service material covers the tines of the fork, vibrations are damped. This damping is sensed electronically, and the processed signal is used to energize a relay more...

• Packaging Type : Box
• Finishing : Polished
• Color : Silver
• Condition : New
• Supply Type : Manufacturer

Jaycee started in 2000 starting with manufacturing of vibrating tuning fork level switches for solid with various outputs suiting control requirements. also manufacturing vibrating forktuning fork level switches for liquid applications. In addition, the manufacturing range include vibrating rod level switches more...

Vital vibrating fork is a compact level switch suitable for all kinds of free-flowing solids and grains. It is ideal for applications such as over-spilling and dry run detection. Vital is unaffected by spurious vibrations and is independent of the application material’s electrical properties. Vital can be m more...

Elixir-T vibrating fork is a compact  level switch for liquids and is used in tanks, containers and pipelines. It comes with hygienic process connection and polished finish and is hence ideal for hygienic applications. This level switch detects the resonant frequency change and changes the output signal acco more...

Vibrating Fork Level Measurement Switch Point level switches which are based on the vibrating tuning fork principle that are designed to detect the low and high level of liquids and fine-grained free flowing solids. Sapcon Instruments offers you a multitude of vibrating fork based level switches and sensors. more...

We are offering vibrating fork liquid level switch. Working principle electronics of lfv12 excites the piezo-electric-crystals inside tuning fork, which makes the fork tines vibrate at their natural resonance frequency in free air. when fork tines are immersed in liquid, the frequency of fork vibration falls more...

Lsv : vibrating fork level switch for solids applications : cement, sand, food grains, cereals, beans, edible oil process, sugar, animal feed, rice plants, detergents, dye powder, chalk, gypsum, gravel, fly-ash, plastic granules, plastic chips, pvc powder, spices, milk powder, talc, principle : the two tines more...