Other Products / Services #42366

Indomenhas state of art technology for manufacturing Chamber Furnace for wide range of applications of heating like hardening, tempering, normalizing, stress reliving, annealing and solution annealing of steel hardware, forged parts, auto components, dies, tools and non ferrous items.

The furnace can be fuel (gas/oil) fired or electrically heated. The fuel fired Burners and Electrical Heaters are startegically located to get good temperature uniformity.

The furnace process and sequence can be controlled through hardware based controller with relay based logic or PLC based system. The Furnace is suitably designed for energy efficiency and with updated modern technology to meet present requirements. The furnaces are normally tailor made, hence we can make furnaces as per the exact requirements.

Features:

Highly energy efficient

PLC based system thyristorised control for electrically heated furnace

PLC based logic with PID based system for fuel (gas/oil) fired furnaces

Easy operation and minimum maintenance

Following the quality parameters, we are engaged in offering comprehensive range of Fully Automatic Furnace. Our product is available as per the international industry standards and in accurate dimensions. Customers like our Fully Automatic Furnace for their high grade quality. Moreover, our product is reliable too.

Features:

Durability

Low maintenance

Reliable

We are renowned amongst the clients for offering wide array of Cremation Furnace. Our product is highly demanded in the market for their high grade quality and reliability. We offer easy to use and highly effective Cremation Furnace to our customers. Moreover, our product is manufactured using latest techniques.

Features:

Shear strength

Precise design

Fine finish

One can avail a wide assortment of Fuel Fired Furnace from us at market leading prices. The offered Fuel Fired Furnace is frequently used in boiler applications. Further, the offered products are manufactured using huge grade material and highly tested for their quality assurance before dispatched to the market.

Features:

Durability

Reliable operation

Low maintenance

Drop Bottom FurnMetallurgical Processes: Solution Heat Treatment, Aging and Annealing Types Of Products: Automobile Wheels, Pistons, Cylinderheads Blocks, Intake Manifolds, Engine Blocks, Air Frame Components, Aluminium Wire, Aluminium Ingots, Aerospace products and Defense products etc.

Indomen offers drop bottom furnace for the solution heat treatment of process aluminum, brass and other nonferrous products. These furnaces ensures faster quenching of charge parts within 10-15 secs

We designed our systems as complete solutions for todays ever-increasing demands to produce high-quality, dependable throughput, while maintaining minimal operating cost. We provide total systems as simple as manual loading and unloading into batch equipment, step-continuous, or fully automated units.

The furnace is supported on a over head structural frame and the Water Quenching Tank and the Loading Platform mounted on a mobile trolley will facilitate loading into the furnace and subsequently quenching after desired heating and soaking through a externally located wire rope type lifting and lowering mechanism.

The furnace can be Electrically Heated or Gas Fired with indirect heating.There is also a recirculation fan for better heat transfer through convection and close and accurate temperature uniformity.

Spacial Features:

Fast heat-up

Excellent temperature uniformity

Faster quench time within 10-15 secs

Indirect gas fired, or electrically heated

Fully automated "lights out" operation, including water quench furnace

Modular design and construction for ease of maintenance and future expansion

Programmable process controls, data acquisition, and part tracking capabilities

Total solution for solution treatmentace

We are one of the leading manufacturers of Chamber Type Furnace with quenching facility and charging and discharging machine for wide range of applications of heat-treatment like hardening, tempering, solution annealing of steel castings, alloy steel castings, manganese steel castings, steel bars and aluminum alloy. The furnace can be fuel (gas/oil) fired or electrically heated. The furnace process and sequence can be controlled through hardware based controller with relay based logic or PLC based system. The Furnace are suitably designed for energy efficiency and with updated modern technology to meet present requirements. The charging machine is suitably designed to facilitate loading/unloading/quenching for multiple furnaces with quench delay within 20 sec from the furnaces.

Features:

Highly energy efficient

PLC based system thyristorised control for electrically heated furnace

PLC based logic with PID based system for fuel (gas/oil) fired furnaces

Easy operation and minimum maintenance

Achieve quench delay of within 20 secs

Indomensealed quench furnace is a highly productive and efficient integral-quench furnace available in either gas-fired or electric models. It is the centerpiece of a complete heattreating system. The furnaces feature obstruction-free work chambers, large capacity re-circulation fans, and strategically located heated sources to ensure rapid heat transfer, low energy use, and excellent temperature and carbon uniformity. A size and in-out configuration is available to fit your needs.

Indomen(sealed) integral quench furnace
Models:sqf-80, 120, 320, 600, 800, 1000Bringing you over 14 years of innovative furnace design

Features/benefits
Fully automatic movement of the load within the furnace, including quench.
Programmable logic controller eliminates sequencing circuit relay maintenance.
Temperature and atmosphere carbon potential are bothautomatically controlled.
A two-pen strip chart records both furnace temperature and percent carbon.
Preheat oil quench with immersion heaters, temperature and excess temperature controllersOil level sight gauge and level alarm.
Air-to-oil quench cooling heat exchanger.
Flowmeters for endothermic gas, natural gas additions, ammonia gas additions, and air for carbon burnout.
Emergency nitrogen gas purge circuit activates on power failure or loss of atmosphere.Scr power control for electrically heated models.
Recuperative vertical radiant tubes for gas-fired models.

Applications
Annealing
Carbonitriding
Carburizing
Tool steel hardening up to 1850f
Normalizing
Temperature range:1850f (980c)

Options
Upper atmosphere cooling: oil-cooled double walled chamber above the quench, cools the workload under protective atmosphere.
Atmosphere cool/oil quench selector switch. Upper cooling is available with or without a recirculating fan to accelerate load cool down.
Hot oil quench with additional immersion heaters and insulation lagged to the quench tank shell.
Variable speed quench agitation.
Enhanced furnace control components.
Complete system automation to suit your unique requirements.

With the year of experience, we are master in offering best quality of Tray Pusher Furnace. This Tray Pusher Furnace is extensively used in metallurgy and machine building to heat metal. Moreover, our professionals ensure to deliver these products in various places all across the world. These products are of world class quality.

Features:

Quality tested

Rugged design

Abrasion resistance

Indomenhas a full range of Bell Furnace up to a capacity of 200 min for annealing, spheroids annealing, normalizing, stress relieving, spheroids annealing and re-heating of fastener, bearing, forge parts, rolls, strip, wire, castings, structures and vessels etc in steel industries. The furnace can be fuel (gas/oil) fired or electrically heated. The furnace process and sequence can be controlled through hardware based controller with relay based logic or PLC based system. The Furnace is suitably designed for energy efficiency and with updated modern technology to meet present requirements. We are also specialized with the supply of the gas carburizing furnace of complete set comprise of pit type carburizing, quenching, washing machine and pit type tempering furnace.

Features:

Highly energy efficient

PLC based system thyristorised control for electrically heated furnace

PLC based logic with PID based system for fuel (gas/oil) fired furnaces

Easy operation and minimum maintenance

Indomenhas wide range of fuel fired and electrically heated Bogie Hearth Furnace. Indomen has a full range of Bogie Hearth Furnace up to a capacity up to 300 MT to offer to Power Sector, Foundry, Pressure Vessels, Heavy Structural, Forgings and other metal industries with temperature range of 150 C to 1350 C. These furnaces can be offered with single/double doors with single/double bogies to meet the customers requirement. In case of bigger furnaces an intermediate door is provided to divide a large furnace in two parts/chambers facilitate the furnace utilization fully or partially as per requirement. The material are loaded on the bogie with the help of EOT crane or any mechanical arrangement and the loaded bogie is pushed into the furnace on rails through electromechanical rack and pinion or rope and drum type bogie drive arrangements. The furnaces can also be offered with Ciro-rollers type bogie drive arrangement. After the reheating/heat treatment operation, the bogie can be taken-out from the furnace and material can be unloaded for further process. Fuel fired furnaces are fired with reputed high efficiency burners supported by a full complement of combustion system consisting of combustion fan, atomizing fan, oil heating and pumping systems and/or gas trains. The furnace can be provided with electrical heating through heat resistant Strip/Wire/hair-pin heating elements located along with the side/back walls/roof of the furnace. The heating elements of the furnace are suitably divided into number of heating zones with each zone of having their bank of heater. To improve fuel efficiency, waste heat recovery system is provided for heating combustion air up to 150- 500 C is provided for furnaces beyond application temperature of 800-1350 C. For customers requiring even more fuel efficiency, Regenerative burners can be offered that can give an air preheat of 1000 C or more.

Features:

Highly energy efficient

Easy operation maintenance

Hardware with relay logic/PLC based logic for process and sequence

Backed with talented team of professionals, we are involved in offering unmatchable quality of Shaker Hearth Furnace. This Shaker Hearth Furnace is extensively used in various suitable applications. Moreover, the offered products are available in market in different sizes and specifications.

Features:

Durable finish

Compact design

Longer working life

Kindly, we are engaged in presenting a wide assortment of Roller Hearth Furnace. This Roller Hearth Furnace is extensively used for all heat treatment processes, for normalizing and for the different annealing treatments of bars, tubes and in many other suitable applications. Our products are highly durable in nature.

Features:

Longer service life

Resistance against rust

Reliable operation

Having years of experience in domain, we are engaged in offering wide assortment of Roller Annealing Furnace. We provide Roller Annealing Furnace to our patrons as per the need of the application. Our product is highly demanded in the market for their effectiveness and usability in various places. Our product is reliable too.

Features:

Sturdy construction

High demand

Less maintenance

Indomenhas a full range of Pit Type Furnace up to a capacity of 30 MT for hardening, annealing, normalizing, carburizing, nit riding, tempering, aging and stress relieving to offer to industries like fastener, bearing, forge parts, gears, rolls, strip, wire, piston rings etc in steel industries besides cylinder heads and pistons for Aluminum industries. Normally these furnaces are of circular construction with insulated cover which is hydraulically lifted/ swiveled for Loading or Unloading the material into and from the furnace. The charge material can be loaded into the Pit furnace with the help of EOT crane or suitable lifting/lowering arrangement. Especially for carburizing application Pit furnaces can also be offered matched quenching facilities, washing machine and tempering furnace to suit customers requirement. Pit furnaces can be offered with or without sealed retorts for inert/reducing atmosphere or normal air atmosphere applications. The furnaces with inert/reducing atmosphere applications will have facility for introducing atmosphere like carbon rich gas, ammonia and nitrogen into a sealed retort made of stainless steel of AISI-310/304 depending on the application temperature. The lid is fitted with gas tight through water-cooled neoprene/silicon rubber seal for proper sealing. These furnaces can be either electrically heated or fuel fired the electrically heated furnaces are provided with resistive strip/wire heating elements located on the sidewall of the furnace. The heating elements of the furnace are suitably divided into number of heating zones and can be controlled through contactor or thruster based control philosophy through PID controllers. Fuel fired Pit furnaces are offered with Wes mans high efficiency burners for Oil/Gas application supported by a full complement of combustion control system with safety devices. Hot air circulation inside the furnace is made by efficient centrifugal or axial type recirculation fan which can be variable VVFD drive as per required temperature application. Pit furnaces are lined with ceramic fiber stack/module at side wall and lid cover. Bottom hearth will be lined with refractory bricks backed by insulation bricks, specially designed to withstand load to minimize the skin temperature. Indomen has full capability to offer complete control and instrumentation system through PLC based or hardware based logic systems.

Features:

Highly energy efficient

PLC based system thyristorised control for electrically heated furnace

PLC based logic with PID based system for fuel (gas/oil) fired furnaces

Easy operation and minimum maintenance

Indomenhas a full range of Rotary Hearth Furnace up to a capacity of 10 MTPH to offer to the Seamless Steel Pipe, Forging Industries, Rolling Mills, Railway Components and power sector. The billets/blooms are placed horizontally on the hearth. Single/double independent hydraulically operated machines or robots by purchaser can be used for charging and discharging of material one at a time on the rotating hearth. Charging machine will pick-up the material from the Charge Roller Table placed at a particular location and place the material through charge door on the hearth at a predetermined place. Simultaneously, the discharge door will also open-up and the discharging machines will pick-up the hot material from the hearth and deliver the material to a discharge roller table. Both charging and discharging doors shall be driven by dedicated electromechanical/hydraulic drive arrangement. Rotating hearth is fitted with adequate number of supporting rollers in two rows and move over rails anchored to the ground. Centering rollers are placed on the inner side of rotating hearth to prevent lateral displacement. Hearth rotation is made through two numbers electromechanical or hydraulic drive units placed at 180 C apart. Hearth indexing arrangement is provided to stop hearth at stations for charging & discharging simultaneously. The furnaces are either electrically heated or fuel fired with high efficiency burners supported by a full complement of combustion system. To improve fuel efficiency, recuperations for heating combustion air up to 500 C is provided. For customers requiring even more fuel efficiency, regenerator burners can be offered that can give air preheat of 1000 C or more for much higher fuel efficiency.

Features:

Optimum output

Affordable

Quality ensured

Indomenhas wide range of Continuous Conveyorized Furnace lines up to 2000 kg/hr with quenching facility and washing machines for the heat treatment of steel hardware, bearings, fasteners, forge parts, castings and aluminum alloy products like cylinder heads and pistons etc. These furnaces can be used for hardening, tempering, carbonitriding, austempering and solution annealing etc. The furnace can be used with neutral/reducing control atmosphere as per the requirement.

The conveyor will be mesh belt type as per the product to be heat treated. The furnace can be electrically heated or fuel (Gas/Oil) fired. The furnace process and sequence will be controlled through PLC based SCADA system which will display the complete heating process, production output, process parameters and location of products. The Temperature control will be thyristorised for electrically heated and PID based control for fuel fired furnaces for better temperature uniformity. The furnaces are designed with high energy efficiency, easy operation with high productivity.

Features:

PLC based SCADA system

Energy efficient design

Sealed atmosphere for minimum de carb

Provision for safety and audio visual alarms for safe and easy operation with least failure