Indomen  has state of art technology for manufacturing Chamber Furnace for wide range of applications of heating like hardening, tempering, normalizing, stress reliving, annealing and solution annealing of steel hardware, forged parts, auto components, dies, tools and non ferrous items.  The furnace can be fuel (gas/oil) fired or electrically heated. The fuel fired Burners and Electrical Heaters are startegically located to get good temperature uniformity. The furnace process and sequence can be controlled through hardware based controller with relay based logic or PLC based system. The Furnace is suitably designed for energy efficiency and with updated modern technology to meet present requirements. The furnaces are normally tailor made, hence we can make furnaces as per the exact requirements. Features:  Highly energy efficient  PLC based system thyristorised control for electrically heated furnace  PLC based logic with PID based system for fuel (gas/oil) fired furnaces  Easy operation and minimum maintenance

We are renowned amongst the clients for offering wide array of Cremation Furnace. Our product is highly demanded in the market for their high grade quality and reliability. We offer easy to use and highly effective Cremation Furnace to our customers. Moreover, our product is manufactured using latest techniques. Features:  Shear strength  Precise design  Fine finish

We are one of the leading manufacturers of Chamber Type Furnace with quenching facility and charging and discharging machine for wide range of applications of heat-treatment like hardening, tempering, solution annealing of steel castings, alloy steel castings, manganese steel castings, steel bars and aluminum alloy. The furnace can be fuel (gas/oil) fired or electrically heated. The furnace process and sequence can be controlled through hardware based controller with relay based logic or PLC based system. The Furnace are suitably designed for energy efficiency and with updated modern technology to meet present requirements. The charging machine is suitably designed to facilitate loading/unloading/quenching for multiple furnaces with quench delay within 20 sec from the furnaces. Features:  Highly energy efficient  PLC based system thyristorised control for electrically heated furnace  PLC based logic with PID based system for fuel (gas/oil) fired furnaces  Easy operation and minimum maintenance  Achieve quench delay of within 20 secs

Indomen  has wide range of Continuous Conveyorized Furnace lines up to 2000 kg/hr with quenching facility and washing machines for the heat treatment of steel hardware, bearings, fasteners, forge parts, castings and aluminum alloy products like cylinder heads and pistons etc. These furnaces can be used for hardening, tempering, carbonitriding, austempering and solution annealing etc. The furnace can be used with neutral/reducing control atmosphere as per the requirement.  The conveyor will be mesh belt type as per the product to be heat treated. The furnace can be electrically heated or fuel (Gas/Oil) fired. The furnace process and sequence will be controlled through PLC based SCADA system which will display the complete heating process, production output, process parameters and location of products. The Temperature control will be thyristorised for electrically heated and PID based control for fuel fired furnaces for better temperature uniformity. The furnaces are designed with high energy efficiency, easy operation with high productivity. Features:  PLC based SCADA system  Energy efficient design  Sealed atmosphere for minimum de carb  Provision for safety and audio visual alarms for safe and easy operation with least failure

Indomen  has a full range of Pit Type Furnace up to a capacity of 30 MT for hardening, annealing, normalizing, carburizing, nit riding, tempering, aging and stress relieving to offer to industries like fastener, bearing, forge parts, gears, rolls, strip, wire, piston rings etc in steel industries besides cylinder heads and pistons for Aluminum industries. Normally these furnaces are of circular construction with insulated cover which is hydraulically lifted/ swiveled for Loading or Unloading the material into and from the furnace. The charge material can be loaded into the Pit furnace with the help of EOT crane or suitable lifting/lowering arrangement. Especially for carburizing application Pit furnaces can also be offered matched quenching facilities, washing machine and tempering furnace to suit customers’ requirement. Pit furnaces can be offered with or without sealed retorts for inert/reducing atmosphere or normal air atmosphere applications. The furnaces with inert/reducing atmosphere applications will have facility for introducing atmosphere like carbon rich gas, ammonia and nitrogen into a sealed retort made of stainless steel of AISI-310/304 depending on the application temperature. The lid is fitted with gas tight through water-cooled neoprene/silicon rubber seal for proper sealing. These furnaces can be either electrically heated or fuel fired the electrically heated furnaces are provided with resistive strip/wire heating elements located on the sidewall of the furnace. The heating elements of the furnace are suitably divided into number of heating zones and can be controlled through contactor or thruster based control philosophy through PID controllers. Fuel fired Pit furnaces are offered with Wes man’s high efficiency burners for Oil/Gas application supported by a full complement of combustion control system with safety devices. Hot air circulation inside the furnace is made by efficient centrifugal or axial type recirculation fan which can be variable VVFD drive as per required temperature application. Pit furnaces are lined with ceramic fiber stack/module at side wall and lid cover. Bottom hearth will be lined with refractory bricks backed by insulation bricks, specially designed to withstand load to minimize the skin temperature. Indomen has full capability to offer complete control and instrumentation system through PLC based or hardware based logic systems. Features:  Highly energy efficient  PLC based system thyristorised control for electrically heated furnace  PLC based logic with PID based system for fuel (gas/oil) fired furnaces  Easy operation and minimum maintenance

Drop Bottom FurnMetallurgical Processes: Solution Heat Treatment, Aging and Annealing Types Of Products: Automobile Wheels, Pistons, Cylinderheads Blocks, Intake Manifolds, Engine Blocks, Air Frame Components, Aluminium Wire, Aluminium Ingots, Aerospace products and Defense products etc. Indomen offers drop bottom furnace for the solution heat treatment of process aluminum, brass and other nonferrous products. These furnaces ensures faster quenching of charge parts within 10-15 secs We designed our systems as complete solutions for today’s ever-increasing demands to produce high-quality, dependable throughput, while maintaining minimal operating cost. We provide total systems as simple as manual loading and unloading into batch equipment, step-continuous, or fully automated units. The furnace is supported on a over head structural frame and the Water Quenching Tank and the Loading Platform mounted on a mobile trolley will facilitate loading into the furnace and subsequently quenching after desired heating and soaking through a externally located wire rope type lifting and lowering mechanism. The furnace can be Electrically Heated or Gas Fired with indirect heating.There is also a recirculation fan for better heat transfer through convection and close and accurate temperature uniformity. Spacial Features:  Fast heat-up  Excellent temperature uniformity  Faster quench time within 10-15 secs  Indirect gas fired, or electrically heated  Fully automated "lights out" operation, including water quench furnace  Modular design and construction for ease of maintenance and future expansion  Programmable process controls, data acquisition, and part tracking capabilities  Total solution for solution treatmentace