Our Products
Industrial Valves
2 Products availableValves & Valve Fittings
1 Products availableScaffolding And Scaffolding Parts
1 Products availablePipe Elbows
1 Products availableIndustrial Coupler
1 Products availableJigs, Casting Dies, Die Casting Moulds & Moulding Tools
1 Products availableOur product range contains a wide range of DIN Fittings, sms fittings, Tee Fittings and Cross
DIN fittings are named from Deutsches Institut fr Normung(DIN)
The DIN union is widely used throughout Europe and incorporates a round slotted nut and a flush fitting lipped seal, as standard. The union is manufactured to suit Imperial tube sizes from 1" to 4" and also to suit DIN metric tube from 10mm to 150mm. Two seals designs are offered for the fitting, namely the flush fitting and crevice free lipped seal and also the cheaper D section seal. The standard seal material is Nitrile/Perbunan and is generally blue or grey in colour. The male features an inverted cone face that carries the seal, while the liner is similarly conical with a flat face to effect a clean hygienic joint.
The seals are available in two forms, the flanged or lipped design which provides a flush fitting and crevice free joint, or the more commonly used unlipped seal.
The fittings can be welded & fabricated onto a range of products including special bends, tees, valves & manifolds.
SMS fittings are named from Swedish Dairy Standard ( Svensk Meieri Standard )Swedish standard union incorporates a round slotted nut and features a crevice free flat section lipped seal. The union is suitable for use on permanently fitted sections of pipework and is generally unforgiving on misaligned joints. The fitting does have the advantage over other designs in that it facilitates the removal of sections of pipework without the need to disturb adjacent sections. The standard material for the seal is EPDM.There are a multitude of variants in pipe-clips and clamps and couplings and unions that is commonly used all over Europe.
Like the DIN 11851 union, SMS fittings are used extensively in the UK and throughout Europe. This is a hygienic fitting with a crevice free design and has the added advantage that it is totally removable in position. This feature enhances the union's suitability for use in frequently dismantled systems.The fittings can be welded & fabricated onto a range of products including special bends, tees, valves & manifolds.
A tee is the most common pipe fitting. It is available with all female thread sockets, all solvent weld sockets, or with opposed solvent weld sockets and a side outlet with female threads. It is used to either combine or split a fluid flow. It is a type of pipe fitting which is T-shaped having two outlets, at 90 to the connection to the main line. It is a short piece of pipe with a lateral outlet. A tee is used for connecting pipes of different diameters or for changing the direction of pipe runs.
When the size of the branch is same as header pipes, equal tee is used and when the branch size is less than that of header size, reduced tee will be used. Most common are tees with the same inlet and outlet sizes.