Our Products
Industrial Valves
2 Products availableJigs, Casting Dies, Die Casting Moulds & Moulding Tools
1 Products availableValves & Valve Fittings
1 Products availableScaffolding And Scaffolding Parts
1 Products availablePipe Elbows
1 Products availableIndustrial Coupler
1 Products availableWe are leaders in the market for providing best range of gmp loop valve
manufactured from SS 316/SS316L investment castings and duly electro polished to 240 # internal surface. End connections can be tri-clamp, flanged or butt wed.
Design Features:
Applications:
Sizes: From " to 3" in tubing or NB schedule sizes.
The GMP loop valves can be utilized to virtually eliminate dead legs in the design of point of use outlets in a typical WFI distribution loop.The process fluid flows through the valve body.Design Features:
Applications:
Sizes:The GMP configuration is available in sizes "-4"(DN 8-100) and can be supplied with buttweld or ferrule end connections.
Butterfly valves can be welded, screwed, clamped or flange-fitted into the stainless steel lines and can be actuated manually or automatically as needed.Wide choice of end fittings in male/butt-weld combinations to keep installation costs to a minimum while offering maximum flexibility for maintenance.Butterfly Valves offer great durability and ease of use for a wide range of services. Easy to install and maintain, butterfly valves close under pressure to form a leak-tight seal.
End Connections:
Material:
Sizes:To suit tube outside diameters of 1", 1", 2", 2"and 4".
A range of stainless steel ball valves for sanitary applications in Pharma, Drug, Food, Beverage, Cosmetics, Dairy and Allied Industries.Ball valves are engineered to be a true process piping component to specifically meet the demanding processes found in the pharmaceutical industries which are designed to specifically meet the demanding process where microbial, particle generation and contamination can threaten the outcome of the product.
DESIGN FEATURES
Tri-clamps or Triclover fittings are a class of sanitary flanges, clamps, gaskets and other fittings that can be of great use for the still builder. They are used in column to boiler connections, breaks in the column to allow for modular setups, detachable takeoff / lyne arms, sight glasses, fill and drain ports on the boiler, food processing industry that uses a non-permanent sanitary food-grade piping interconnect method, and many other uses.The interconnect consists of:
A lip flange on the ends of pipes with a grooved indentation on the flange.
A polymer sealing gasket placed between sections of pipe, squeezed between the flanges. This ring has a raised groove on both sides mating with the indentations of the two pipes on either side.
An enclosing clamp with C-shape clamping sections that cover the outer circumference of the flanges, applying pressure to squeeze the two pipe sections together onto the sealing ring. The clamp also provides structural strength and rigidity to the pipe sections.
The combined lip flange and gasket do not impede the flow of fluids through the piping.
The clamping system may be permanent, using a hose clamp style screw and band, or it may be easily removable using a fold-over hinged clamp assembly.
A BEND is the generic term for what is called in piping as an "offset" - a change in direction of the piping. A bend is usually meant to mean nothing more than that there is a "bend" - a change in direction of the piping.An elbow is a pipe fitting installed between two lengths of pipe or tubing to allow a change of direction, usually a 90 or 45 angle , though 22.5 elbows are also made. The ends may be machined for butt welding, threaded (usually female), or socketed, etc. When the two ends differ in size, the fitting is called a reducing elbow or reducer elbow.Elbows are categorized based on various design features as below:
A coupling connects two pipes to each other. If the size of the pipe is not the same , the fitting may be called a reducing coupling or reducer, or an adapter. By convention, the term "expander" is not generally used for a coupler that increases pipe size; instead the term "reducer" is used.
A reducer allows for a change in pipe size to meet hydraulic flow requirements of the system, or to adapt to existing piping of a different size. Reducers are usually concentric but eccentric reducers are used when required to maintain the same top- or bottom-of-pipe level.
ell molding, also known as shell-mold casting, is an expendable mold casting process that uses a resin covered sand to form the mold.Shell moulding is similar to sand moulding except that a mixture of sand and 3-6% resin holds the grains together. Shell moulding also uses sand with a much smaller grain than green-sand. Set-up and production of shell mould patterns takes weeks, after which an output of 5-50 pieces/hr-mould is attainable. Aluminium and magnesium products average about 13.5 kg as a normal limit, but it is possible to cast items in the 45-90 kg range. Shell mould walling varies from 3-10 mm thick, depending on the forming time of the resin.
Shell moulding is used for small parts that require high precision. Some examples include gear housings, cylinder heads and connecting rods.It is also used to make high-precision moulding cores. Compared to sand casting this process makes complex parts be cast withbetter dimensional accuracy, a higher productivity rate, and lower labor requirements. less labor.
There are a dozen different stages in shell mould processing that include:1. Initially preparing a metal-matched plate2. Mixing resin and sand3. Heating pattern, usually to between 505-550K4. Inverting the pattern5. Curing shell and baking it6. Removing investment7. Inserting cores8. Repeating for other half9. Assembling mould10. Pouring mould11. Removing casting12. Cleaning and trimming.The sand-resin mix can be recycled by burning off the resin at high temperatures.