Verified
Add Review
Our Products
Busbar System
2 Products availableBrass Pipe
2 Products availablePipe Tees
2 Products availableAluminium Pipes
2 Products availableRound Bars
1 Products availableSteel Bars
1 Products availableWe offer the best product range of copper pipes and tubes, copper plumbing tube, Eco Friendly Copper Tubes, Copper Pipes, Rods & Sections and Lwc Copper Tube.
Copper Pipes and Tubes All tubes are electronically tested by Eddy Current method, as per the requirements of ASTM E 243. Indigo tubes are 100% carbon free. All tubes are cleaned and sample tested to meet the residual requirements as specified by the codes at 0.038gm2 (0.35gft2).
The Level Wound Coil (LWC) Copper Tubes is one of our imported & supplied products. All LWC tubes are normally produced according to ASTM & Coproclima specifications. These specifications were prepared to take account of the requirements of ACR industry.
Additional Information:
Packaging Details : wooden boxes sea worthy and export worthy
Delivery Time : as per size and qty
Additional Information:
Payment Terms : T/T
Delivery Time : 7 days
Additional Information:
Payment Terms : T/T
Delivery Time : 7 days
Additional Information:
Payment Terms : T/T
Delivery Time : 7 days
We are considered as a major Cupro Nickel Tube Manufacturer, Exporter and Supplier from India. Available in a wide variety to suit your needs, our Cupro Nickel Tubes are designed to perform efficiently wherever they are used. Availability
Specialty
Required For
Technical Specifications (70/30 Tubes)
| Standard | BS 2871 PART 3 | ASTM B-111 | DIN 1785 | NFA 51 102 | JIS H3300 | IS 1545 |
| Symbol | CN 107 | C 71500 | CuZn30 Mn 1 Fe | CuZn30 Mn 1 Fe | C 7150 | CuZn 30 Mn 1 Fe |
| Cu | Remainder | Remainder | Remainder | Remainder | Remainder | Remainder |
| Pb | 0.01 | 0.05 | 0.03 | 0.05 | 0.05 | 0.05 |
| - | - | - | Sn+Pb | - | - | |
| Ni | 30.00 - 32.0 | 29.0 - 33.0 | 30.0 - 32.0 | 29.0- 32.0 | 29.0- 33.0 | 29.0- 33.0 |
| Fe | 0.4 -1.0 | 0.4 -1.0 | 0.4 -1.0 | 0.4 - 0.7 | 0.4 - 0.7 | 0.4 - 1.0 |
| Mn | 0.5 - 1.0 | 1.0 | 0.5 - 1.5 | 0.5 - 1.5 | 0.2-1.0 | 0.5 - 1.0 |
| S | 0.05 | - | 0.05 | 0.02 | - | - |
| C | 0.06 | - | 0.30 | 0.10 | - | 0.30 |
| Totallmpurites Max. | 0.30 | - | 0.1 | 0.30 | Rem (Cu+Ni+Fe+Mn 99.5 Min) | 0.30 |
| Condition | M | O 61 | F37 | - | O | O |
| - | - | F 42 | - | - | - | |
| O | HR 50 | - | - | - | D | |
| Yield | - | 125 Min | 120 - 220150 - 260 | - | - | - |
| Strength | - | 345 Min | - | - | - | - |
| N/mm2 | - | - | - | - | - | - |
| Tensile | - | 360 Min | 370 Min | - | 363 Min | 360 Min |
| N/mm2 | - | 495 Min | 420Min | - | - | 480 Min |
| Elongation | - | 12/15* | 35 Min | - | 30 Min. | - |
| % | - | - | 30 Min | - | - | - |
| Hardness HV 5 | 150 | - | - | 90-130 | - | 115 Max |
| - | 90 - 120 | - | - | - | - | 140 Min |
| Grain Size | 0.05 Max | - | - | 010-045 | 010-045 | - |
| Mm (75X) | - | - | - | - | - | - |
Technical Specifications (90/10 Tubes)
| Standard | BS 2871 PART 3 | ASTM B-111 | DIN 1785 | NFA 51 102 | JIS H3300 | IS 1545 |
| Symbol | CN 122 | C 70600 | CuZn28 Fe 1 Min | CuZnl0 Fe 1 Mn | C 7060 | CuNi 10 Fe1 |
| Cu | Remainder | Remainder | Remainder | Remainder | Remainder | Remainder |
| Pb | 0.01 | 0.05 | 0.03 | 0.05 Sn+Pb | 0.05 | 0.05 |
| Ni | 10.0-11.0 | 9.0 - 11.0 | 9.0 - 11.0 | 9.0 - 11.0 | 9.0 - 11.0 | 9.0 - 11.0 |
| Fe | 1.0-2.0 | 1.0 - 1.8 | 1.0 - 2.0 | 1.0 - 2.0 | 1.0 - 2.0 | 1.0 - 1.8 |
| Mn | 0.5-1.0 | 1.0 | 0.5 - 1.0 | 0.3 - 1.0 | 0.2 - 1.0 | 0.5 - 1.0 |
| Zn | - | 1.0 | 0.5 | 0.5 | 0.5 | 0.5 |
| S | 0.05 | - | 0.05 | 0.02 | - | - |
| C | 0.06 | - | 0.05 | 0.05 | - | - |
| Totallmpurites Max. | 0.30 | - | 0.30 | 0.10 | Rem (Cu+Ni+Fe+Mn 99.5 Min) | 0.30 |
| Condition | M | O 61 | F 29 | - | O | O |
| O | HR 55 | - | - | - | D | |
| Yield | - | 105 Min | 90-180 | - | - | - |
| Strength | - | 240 Min | - | - | - | - |
| N/mm2 | - | - | - | - | - | - |
| Tensile | - | 275 Min | 290 Min | - | 275 Min | 295 Min |
| N/mm2 | - | 310 Min | - | - | - | 285 Min |
| Elongation | - | - | 30 Min | - | 30 Min | - |
| % | - | - | - | - | - | - |
| Hardness HV 5 | 150 | - | - | 70-100 | - | 110 Max |
| - | 90 - 120 | - | - | - | - | - |
| Grain Size | 0.05 Max | - | - | 010-045 | 010-045 | - |
| Mm (75X) | - | - | - | - | - | - |
Additional Information:
Payment Terms : T/T
Delivery Time : 7 days
Additional Information:
Payment Terms : T/T
Delivery Time : 7 days
Technical Specifications
| Sizes | 6mm 0D to 159mm 0D |
|---|---|
| Thickness | 0.5mm to 2.5mm as per Table X, Table Y, Table Z |
| Length | 10 Feet or as required |
| Temper | H/HH |
We are engaged in the manufacturing and supplying of Copper Tubes & Pipe which are extensively used in numerous industrial applications. Owing to the unmatched quality of our Copper Alloy Tubes we have received bulk orders across the nation. We are regarded as a reliable Copper Alloy Tubes Manufacturer. The variety in diameters, lengths, sizes and dimensions eases the customers to choose the best depending upon the applications. We also welcome customizations to meet the specific requirements of our valuable customers. We are well placed amid the leading Copper Alloy Pipes Exporters from India.
Additional Information:
Payment Terms : T/T
Packaging Details : wooden.currogated boxes.hesian cloth
Delivery Time : 7 days
Specifications
| Types | Sizes | Length | Application |
|---|---|---|---|
| Pancake Coils | 1/8"(3.2 mm ) OD to 1� ( 25.4 mm) OD | 50ft/100 ft | ACR, Instrumentation, Railways, General Engineering, etc. |
| L.W.C. (Level Wound Coils) | 1/4" (6.34 mm) OD to 5/8 (15.8 mm) OD | In Continuous Length upto 1000 mtrs | ACR, Instrumentation, Gas Lines, etc. |
| Inner Grooved L.W.C. | 7mm OD to 5/8" (15.8mm) OD | In continuous Length upto 1000 mtrs | ACR, etc. |
| P.V.C. Coated Tubes & Coils | 1/8" (3.2mm) OD to 1" (25.4mm) OD | In Continuous Length from 15 mtrs to 1000 mtrs | Instrumentation, Gas Lines, General Engineering, CNG/LPG Kit Industry, Refineries, etc. |
| Straight Pipes & Tubes | 2mm OD to 250mm OD | In Continuous Length from 15 mtrs to 1000 mtrs | ACR, Gas Lines, Refineries, Distilleries, Sugar Factories, Heaters, Heat Exchangers, Solar Industry, Ordinance Factory, etc. |
| Finned Tubes (19/26 Finns per inch) | 5/8" ( 15.8mm) OD & 3/4" (19.044mm) OD | Specific Length or upto 10 mtrs | ACR, Heat Exchangers, Naval Industries, etc. |
| Plumbing Tubes | 6mm OD to 159mm OD | 10 feet or as Required | Plumbing & Water Lines, Sanitation. |
| Capillary Tubes | 0.030" ID to 0.090" ID | 100ft Standard or upto 500 mtrs | ACR, Instrumentation |
Our company is recognized as a reliable Finned Copper Tube Manufacturer in India. The Copper Finned Tubes offered by us are extensively used in API heat exchangers. High durability, tensile strength and resistivity to adverse conditions has also made the Mono-Metallic Copper Finned Tubes suitable for applications like heat exchanging in commercial units for cooling and heating of liquid and gas, including water, oil, steam and air as well as for condensation, evaporation etc. Types
Specialty
Applications
Additional Information:
Payment Terms : T/T
Delivery Time : 7 days
Technical Specifications
| Sizes | 5/8 " (15.8mm) OD & 3/4 " (19.044mm) OD(19/26 finns per inch) |
|---|---|
| Length | Specific length or up to 10 mtr. |
| Thickness | 1.6mm to 1.2mm |
| Temper | HH |
| Application | ACR, Heat Exchangers, Naval Industries |
| Type | Intergroove integrally Finned Tubes Internally |
| Cappillery Tubes | |
| Sizes | 6mm OD to 159mmOD |
| Length | 0.5mm to 2.5mm as per Table X, TableY, Table Z |
| Thickness | 10 Feet or As Requried |
| Temper | H/HH |
| Application | Piumbing & Water Lines, Sanitation |
Additional Information:
Payment Terms : T/T
Delivery Time : 7 days
Additional Information:
Payment Terms : T/T
Delivery Time : 7 days
Additional Information:
Payment Terms : T/T
Delivery Time : 7 days
Technical Specifications
| Type | Size | Length |
|---|---|---|
| Capillary Tubes | 0.030"ID to 0.090"ID | 100ft standard or upto 500mtrs |
Additional Information:
Payment Terms : T/T
Delivery Time : 7 days
| Types | Application |
|---|---|
| 70/30 Tubes | Heat Exchangers, High Capacity Power Plants, Ship Building & Ship Repairs, Condensers, Offshore Oil Rigs, Distiller tubes, Evaporation, Ferrules |
| 90/10 Tubes | Heat Exchangers, Application, Refineries, Power Plants, Desalination Plants, Ship Building & Repairs, Condensers, Offshore Oil-Rigs, Car Braking Systems, etc |
Additional Information:
Payment Terms : T/T
Delivery Time : 7 days
Technical Specifications
| Sizes | 2mm OD to 250mm OD |
|---|---|
| Length | Up to 10mtr or as required |
| Thickness | 0.30mm to 20 mm |
| Temper | O/ HH /H |
| Application | Heat Exchanger, Refineries, general engineering |
Additional Information:
Payment Terms : T/T
Delivery Time : 7 days
Technical Specifications
| Sizes | 1/8"mm(3.2mm) OD to 1"(25.4mm)OD |
|---|---|
| Length | In cut length from 2 mtr to 14 mtr In continues length from 15 mtr to 1000 mtr |
| Temper | 0 for soft coils H/HH for straight pipes |
| P.V.C | 0.5 mm to 2 mm |
| Thickness | - |
| P.V.C Colour | Blue/Black/White or any colour per customer choice |
Indigo Metalloys (P) Ltd was founded in 2001 and have established a reputed name as a manufacturers & exporters of Copper & Copper Alloys Products in a very short time. An ISO 9001-2008 certified Co & a state of art manufacturing plant, Indigo Metalloys enjoys a strong presence in dispatching high quality hot extruded & cold drawn Copper & Copper Alloys Products as per client specification.
Additional Information:
Packaging Details : Wooden Boxes Sea worthy and export worthy
Delivery Time : As per size and quantity
Additional Information:
Payment Terms : T/T
Delivery Time : 7 days
Girgaon, Mumbai, Maharashtra