Our Product / Services
Dyes & Pigments
2 Products availablePolyurethane Sealants
2 Products availablePaints, Varnishes & Wall Putty
1 Products availableLaminated Sheets
1 Products availableEpoxy Coatings
1 Services availablePlastic Sheets
1 Products availableOur product range contains a wide range of exterior wall primer, Water Thinnable Cement Primer, S T Metal Primer and S T Wood Primer
Indigo Exterior Wall primer is a water based wall coating suitable for application on exterior walls as an undercoat to exterior emulsion.
Surface Preparation & Application:
Ideally suitable for exterior use. For priming plastered walls, asbestos, concrete, brickwork, etc. Has excellent sealing properties and good resistance to moisture and alkali. Apply on dry, clean and sound surface. Use one or two coats depending on surface condition. Dry 24 hours before applying finishing paint. Use clean fresh water for thinning.
Surface Preparation & Application:
Suitable for both interior and exterior use. For priming plastered walls, asbestos, concrete, brickwork, etc. Has excellent sealing properties and good resistance to moisture and alkali. Apply on dry, clean and sound surface. Use one or two coats depending on surface condition. Dry 24 hours before applying finishing paint. Use clean fresh water for thinning.
Indigo Paints ST Metal Primer is a value for money alkyd based metal primer used as an undercoat for ferrous metal surfaces.
Surface Preparation & Application:
Stir contents thoroughly. Clean the surface to be painted by removing all loose particles, grease, dirt, rust etc. Apply one coat of ST Metal primer. Allow to dry for 4-6 hours. Any undulation can be filled using Indigo Knifing Paste Filler Grey. Allow to dry. Sand the surface and apply one coat of Indigo ST Metal Primer. Allow the film to dry overnight before applying the topcoat.
Indigo Paints Solvent Thinnable (ST) Wood Primer is a synthetic resin based undercoat specially designed to protect wood. It provides excellent adhesion to the substrate by penetrating into the wood fibre and forms a sound base for application of the topcoat.
Surface Preparation & Application:
Sand the surface using abrasive paper grit no.180 and wipe clean. Stir contents thoroughly.Apply Indigo ST Wood Primer using brush or spray after thinning 10-15% with turpentine. Allow the film to dry overnight before applying the topcoat.